Essex · England
Bath re-enamelling & resurfacing in Kirby Cross, Essex
Full bath re-enamelling and resurfacing in Kirby Cross, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Thin, worn enamel in places
Our work in Kirby Cross
Kirby Cross is about 5 miles north-east of Clacton-on-Sea, in Essex. Whether you’re in the middle of Kirby Cross or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Our technicians cover all 644 towns and villages in Essex, from the larger towns to small villages. You can also see our page for London, about 62 miles away.
Every address in CO13 is within our area, from the main roads to the quietest streets. That includes homes on Turpins Lane, Hunt Way and Stubbs Close. Other places close to Kirby Cross include Frinton-on-Sea (1 mile south-east), Kirby-le-Soken (1 mile north-west), Walton-on-the-Naze (1 mile east), Great Holland (1 mile south-west) and Lane End (2 miles north-west). We also work in nearby towns such as Colchester (15 miles west), Clacton-on-Sea (5 miles south-west), Harwich (6 miles north), Greenstead (13 miles west), Wivenhoe (12 miles west) and Brightlingsea (9 miles west).
Around Kirby Cross
We visit homes around Tendring Technology College, St Mary Magdalene and The Ship pub, among other places. You will also find Frinton Park (0.6 miles east) and Frinton-on-Sea Primary School (less than half a mile south). Kirby Cross has its own railway station: Frinton-On-Sea station. Open spaces near Kirby Cross include Great Holland Pits.
How we handle bath re-enamelling in Kirby Cross
Re-enamelling is a one-day job for most baths, and you can use the bath the day after. Taps, tiles, panels and plumbing all stay in place. Common call-outs are for a peeling or bubbling previous coating and an outdated colour you’d like to change, in pressed steel baths, Victorian roll-tops and acrylic baths.
Big or small, you get the same one-year guarantee.
- Area
- Kirby Cross (CO13)
- Area hub
- Essex
- Warranty
- One year on every repair
- Price
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Kirby Cross questions
Can you make a coloured bath white?
Yes, most people go for white. Mention the colour you want when you send pictures.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
How soon can you come?
That depends on our diary for your area. Send photos with your postcode and we’ll reply with the earliest dates.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit generally costs less than separate visits. Send pictures of everything you’d like done.
Is there a smell?
Some odour is normal while we spray, so we ventilate the room. It fades as the coating cures.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as homeowners.
How much does bath re-enamelling cost in Kirby Cross?
Prices start from £350. Because every job differs, we price from pictures. You’ll get a fixed figure before booking.
Do I have to be there?
Someone needs to let us in and show us the job. You do not need to watch us work.
Places near Kirby Cross
What else we do in Kirby Cross
How to look after the repair
Simple care helps the repair last. Our advice:
- Stick to gentle, non-abrasive cleaners
- A quick wipe after use keeps limescale away
- Repair dripping taps early
- Keep toiletries on a shelf rather than in the bath
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and don’t leave bottles or razors standing on the surface.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
What happens on the day
We begin by going over the job with you, so you know exactly what we’re doing. After that, protection goes down around the work area and we start. Allow a full day, and we’ll keep you posted as we go.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the day after, the bath is ready.
Preparing for the visit
- Clear toiletries, mats and anything else from around the area
- Avoid using the area for a few hours before we arrive
- Make sure the room can be ventilated
Getting a price
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
Read more
Common problems we fix in Kirby Cross
Previous coatings can fail too, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
Signs it’s time to call us include:
- A peeling or bubbling previous coating
- A bath that stays dull however much you clean it
- Wear marks under the taps
- An outdated colour you’d like to change
What to look for in a quote
- When it can be used again
- What happens if they find more damage
- The length of the guarantee and what it covers
- How the colour is matched
Landlord and trade work in Kirby Cross
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Materials and what they mean for the repair
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Should you replace it?
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Our bath re-enamelling starts from £350. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.
Why choose Surface Doctor in Kirby Cross
- A year’s guarantee on all work
- We come to you, anywhere in the UK
- We’ll tell you if it’s not worth repairing
- Same prices wherever you are
Take a look at our pricing and guide to resurfacing and replacement costs.
DIY repairs versus a professional job
A DIY attempt is not a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
What bath re-enamelling costs
Prices start from £350. A fixed quote means you know the cost before booking. We take into account:
- What the surface is made of
- The type of damage
- The size and number of damaged areas
- Any earlier repairs that need removing first
There are no surprise extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Quotes from your photos
Two or three clear pictures are normally enough. It helps if you send:
- The postcode, so we can plan the visit
- Natural light rather than flash
- A clear, close picture of the problem area
- What it’s made of, if you know
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
About our accreditations · Every repair comes with a one-year guarantee.
