Cumbria · England
Bath Re-enamelling for Greysouthen homes
Bath re-enamelling across Greysouthen and nearby, done in a single visit in most cases.
- Resurfacing from £350
- A roll-top that’s seen better days
- Brown or grey marks that do not clean off
Can I fix it myself?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
Bath re-enamelling in Greysouthen, done in place
Resurfacing renews the entire surface of the bath without a refit. It suits baths that are dull, stained, rough or chipped all over. Typical jobs include a period or roll-top bath worth keeping and a bath in a colour that no longer suits, in cast iron baths, basins & shower trays and pressed steel baths.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Location
- Greysouthen (CA13)
- County
- Cumbria
- Guarantee
- One year on every repair
- Price
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Towns and villages near Greysouthen
More services for Greysouthen
When we’d advise against a repair
We would rather lose a job than do one that will not last, so here’s what a repair cannot put right:
- Anything hidden under an old coating, until we remove it
- A poorly supported acrylic bath, until it’s firmed up
- Leaking taps or wastes (a plumber’s job)
Not sure? Send pictures and we will give you a straight answer.
Surfaces we repair
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
What bath re-enamelling costs
Prices start from £350. We price every job individually. What matters most is:
- How easy the damage is to reach
- What the surface is made of
- Doing more than one item at once
- Any earlier repairs that need removing first
Instead of hourly rates, we price the entire job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
Send photos for a quote
Two or three clear pictures are usually enough. Try to include:
- Where you are, by postcode
- Natural light rather than flash
- A close-up of the damage, in focus
- A coin or ruler next to the damage for scale
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
Should you replace it?
When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Tiles, panels and taps stay put. Resurfacing from £350, with every job priced individually. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you’ll get a fixed figure.
Why us?
- CHAS, Constructionline and SafeContractor accredited
- Nothing taken out or refitted
- Free fixed quotes from pictures
- Colour mixed on the day to match
See our pricing or bath cost comparison.
Covering Greysouthen
Greysouthen is about 5 miles east of Workington, in Cumbria. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We work in 438 places across Cumbria. Our jobs stretch from Greysouthen to Newcastle upon Tyne (76 miles away).
Every address in CA13 is covered, from the main roads to the quietest streets. Whether you live on Main Street, Fletchers Croft and Chapel Terrace or anywhere nearby, we can come to you. Neighbouring places we cover include Broughton Cross (1 mile north), Bridgefoot (1 mile west), Little Clifton (1 mile west), Brigham (1 mile north-east) and Great Broughton (1 mile north). We also work in nearby towns such as Workington (5 miles west), Whitehaven (9 miles south-west), Maryport (5 miles north-west), Cockermouth (3 miles east), Keswick (13 miles east) and Moorclose (4 miles west).
Near you in Greysouthen
In Greysouthen, that means homes near St Luke's Church and St Bridget's CofE School. The closest station to Greysouthen is Flimby station, about 4.3 miles north-west of the centre. A little further out are Cockermouth Castle (3.3 miles east) and The Printing House Museum (3.1 miles east). Open spaces near Greysouthen include Siddick Pond.
Greysouthen questions
Is there a smell?
A little, during the work. We set up ventilation and the smell fades as it cures.
How long does re-enamelling last?
Care for it and it lasts. Gentle cleaning, no suction mats.
Can a failed resurfacing be redone?
Yes. Removing the old finish takes extra time, which we include in the price.
What happens next?
You will get a fixed quote back, usually with dates to choose from. You are under no obligation.
How do I get a price for bath re-enamelling in Greysouthen?
Prices start from £350. Every job gets a fixed quote from your pictures. Send a close-up and a picture of the entire item with your CA13 postcode.
Can I get a quote without a visit?
In nearly every case. If pictures do not show enough, we’ll ask for another angle.
Do you come to Greysouthen?
We do. Technicians travel to Greysouthen from across the region, with no extra charge for travel.
Do you work for landlords and businesses?
Yes, often. We can quote for several properties together and work between tenancies.
Work for landlords and builders
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.
Builders use us to fix snagging damage before handover. Several plots can be done in one visit to keep costs down.
Repairs by material
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
How the visit works
We work cleanly and quietly, so you can carry on at home. Protection goes down first, then the work takes most of the day. Before we leave, we explain the curing time and the aftercare.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Keep pets and children out of the room while we work
- Let us know about parking or access
- Clear the area around the damage
Get a quote
To get a price, send a couple of pictures through our quote form or ring us. We will say right away whether it can be repaired.
Read more
Do you need bath re-enamelling in Greysouthen?
Frequently the bath has just had decades of use. The body of the bath is generally perfectly sound.
Contact us if you’ve noticed:
- Staining under the taps and around the waste
- A coloured bath you want in white
- A dull, rough surface that will not come clean
- A coating lifting around the plughole
What your quote should include
- The length of the guarantee and what it covers
- Whether they match the colour on site
- Who will actually do the work
- How long it needs to cure
About our accreditations · Every repair comes with a one-year guarantee.
