Cumbria · England
Bath re-enamelling & resurfacing in Broughton Cross, Cumbria
Fixed-price bath re-enamelling in Broughton Cross and the surrounding area, usually in one visit and guaranteed for a year.
- Resurfacing from £350
- Chips and rust in more than one place
- Worn patches where water runs and sits
Broughton Cross and the surrounding area
Broughton Cross is about 5 miles east of Workington, in Cumbria. Book a date that suits you, and we’ll give you an arrival time in advance, so there’s no waiting around. Our repair technicians cover all 438 towns and villages across Cumbria. Our jobs stretch from Broughton Cross to Newcastle upon Tyne (75 miles away).
We cover every part of the CA13 postcode area and the streets around it. We also cover the places around Broughton Cross: Brigham (1 mile east), Greysouthen (1 mile south), Great Broughton (1 mile north), Little Broughton (1 mile north) and Bridgefoot (1 mile south-west). Larger places within reach include Workington (5 miles west), Whitehaven (10 miles south-west), Maryport (4 miles north-west), Cockermouth (3 miles east), Keswick (13 miles east) and Moorclose (5 miles south-west).
Local landmarks in Broughton Cross
Locally, our jobs take us to homes close to St Bridget's Church and St Bridget's CofE School. For rail, the closest station is Flimby station, about 4.1 miles north-west of the centre. Nearby you will also find The Printing House Museum (2.7 miles east) and Cockermouth Castle (2.9 miles east). Not far away are Siddick Pond.
Bath re-enamelling in Broughton Cross, done in place
We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. We are frequently asked to fix an old resurfacing that’s failing and brown or grey marks that don’t clean off, across pressed steel baths, Victorian roll-tops and acrylic baths.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Area
- Broughton Cross (CA13)
- Area hub
- Cumbria
- Warranty
- One year on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Towns and villages near Broughton Cross
More services for Broughton Cross
Why repair rather than replace?
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Prices start from £350. Our prices are the same across the UK, so there’s no premium for Broughton Cross. The job itself decides the price: how much damage, what it’s made of and how many items.
Why us?
- Most jobs done in one visit
- Dust sheets down, tidy finish
- Free fixed quotes from pictures
- Colour-matched on site
See our pricing and resurfacing vs replacement cost guide.
What a repair can’t fix
In fairness, some problems need a different fix:
- Problems we cannot see until an old finish comes off
- Plumbing leaks, which need a plumber
- An acrylic bath that flexes badly underfoot
Not sure? Send pictures and we’ll give you a straight answer before booking.
Materials we work on in Broughton Cross
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
DIY kit or professional repair?
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
How we price bath re-enamelling
Resurfacing from £350. There’s no area surcharge for Broughton Cross. What changes the price is:
- The type of damage
- The material and finish
- How many items we do on one visit
- Any earlier repairs that need removing first
The price reflects the work involved, not your postcode. The full price is agreed before you book, with nothing added on the day.
How to get a fixed quote
A couple of clear pictures is all it takes. It helps if you send:
- Something in shot to show the size
- Your postcode, so we can check dates
- Good light, ideally daylight, without flash glare
- A clear, close picture of the problem area
We price from photos so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Materials and what they mean for the repair
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
What we are called out for in Broughton Cross
Previous coatings can fail too, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
If you can see any of these, send us a picture:
- A bath that stays dull however much you clean it
- An original cast iron bath that needs restoring
- An old resurfacing that’s failing
- Worn patches where water runs and sits
Before booking anyone
- How long the guarantee is and what it covers
- When it can be used again
- Who turns up on the day
- What preparation is included
The process
We turn up at the time we agreed with you, introduces themselves and checks the damage against your photos first. Dust sheets and masking tape go down before we open a single tin. The work itself takes the best part of a day, and we leave the room as we found it.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can usually be used the following day.
Preparing for the visit
- Keep children and pets away from the room on the day
- Tell us about parking, stairs or access
- Let the surface dry out before the visit
Getting a price
Pricing is simple: take a close-up of the damage and a photo from further back, send them over with your postcode, and we’ll reply with a fixed price. There’s no charge for the quote and no obligation.
Related advice
Keeping it looking good
Nothing complicated is needed:
- Store bottles off the bath
- A dripping tap should be fixed promptly
- Dry the bath after use to stop limescale
- Rinse off hair dye, oils and bath bombs right away
Dry the bath after use if possible, especially in hard water areas, and rinse off any bath products.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Your questions about bath re-enamelling in Broughton Cross
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as householders across Cumbria.
I’m a tenant. Can you help?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Are there extra charges for Broughton Cross?
We do not add a call-out fee. Your fixed price includes everything.
Do you cover Broughton Cross?
Yes. We work across the UK and come to Broughton Cross and the rest of Cumbria. Send us pictures for a fixed quote, or call 0345 017 0787.
Can you repair something that’s been repaired before?
Yes, we often do. It can add a little time, which we include in the quote.
How do I get a price for bath re-enamelling in Broughton Cross?
Resurfacing from £350. Because every job differs, we price from photos. You know the full cost before anything is booked.
Is it worth repairing rather than replacing?
Generally, when the rest is in good condition. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
What happens after I send photos?
We look at the photos and reply with a fixed quote and some dates. If we need another angle, we will ask.
About our accreditations · Every repair comes with a one-year guarantee.
