Lancashire · England
Bath Re-enamelling in Grindleton
Full bath re-enamelling and resurfacing in Grindleton, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Staining under the taps and around the waste
- A peeling or bubbling previous coating
About our bath re-enamelling in Grindleton
The bath stays where it is, so your taps, tiles and plumbing are left alone. It typically takes one visit, and can be used again the next day. Common call-outs are for a bath that stays dull however much you clean it and wear marks under the taps, across basins & shower trays, pressed steel baths and Victorian roll-tops.
You are covered for a year from the day of the repair. If anything is not right, ring us and we’ll sort it.
- Area
- Grindleton (BB7)
- Region
- Lancashire
- Cover
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Work for landlords and builders
If you manage property in Grindleton, we will quote for several properties at once. Send pictures for each one and we’ll come back with a combined price.
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
What happens on the day
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes the best part of a day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the next day.
Getting ready for the visit
- Make sure the room can be ventilated
- Avoid using the area for a few hours before we arrive
- Plan for the room to be out of bounds to pets and children
Get a quote
For a price in Grindleton, photos are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Advice
Also near Grindleton
More services for Grindleton
What bath re-enamelling costs
Resurfacing from £350. Quotes are free and the price is fixed. What we take into account:
- Whether it’s a chip, crack, burn or wear
- Whether we combine several jobs
- Where the damage is and how we get to it
- What the surface is made of
Compared with replacing, repairing typically costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Quotes from your pictures
Two or three clear photos are generally enough. Try to include:
- Any details about the material
- Where you are, by postcode
- One picture of the whole bath
- A close-up of the damage, in focus
A quote takes minutes to ask for: photograph the damage, then the whole bath, add your postcode and send them over. You’ll get a fixed price, not an estimate.
Our work in Grindleton
Grindleton is about 3 miles north of Clitheroe, in Lancashire. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Grindleton is one of 482 towns and villages in Lancashire where we work. Our nearest city page is Manchester, about 30 miles away.
Postcode districts we cover here: BB7. We regularly work on streets such as Main Street, Back Lane and Harrison Terrace. If you’re just outside Grindleton, we cover Chatburn (1 mile south-east), Sawley (1 mile east), West Bradford (1 mile west), Downham (2 miles south-east) and Waddington (2 miles south-west). Within a short drive, we also cover Burnley (9 miles south-east), Accrington (11 miles south), Nelson (8 miles south-east), Rawtenstall (15 miles south), Colne (9 miles south-east) and Clitheroe (3 miles south).
Local landmarks in Grindleton
Typical jobs here are in homes near Grindleton Church of England Voluntary Aided Primary School, Bowland High and St Ambrose's Church, among other places. The closest station to Grindleton is Clitheroe station, about 2.6 miles south-west. Other landmarks nearby include Clitheroe Community Hospital (1.5 miles south) and Clitheroe Castle (2.7 miles south). Green spaces nearby include Browsholme Tarn and Salthill Quarry.
DIY repairs versus a professional job
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.
Grindleton questions
Do you need to take the bath out?
No, it stays where it is. We work on the bath in place, with the room masked and ventilated.
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
Is a repair better than a new one?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we’ll tell you.
Can you quote from pictures?
Nearly always. If pictures do not show enough, we’ll ask for another angle.
Do you come to Grindleton?
Yes, we do. We send a technician to Grindleton for every job, with no extra charge for travel.
How durable is a resurfaced bath?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
What if the damage is worse than the photos show?
We will show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.
Are you accredited?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Should you replace it?
There are times replacing is better: if the bath is cracked through, if you want a different size or shape, or if you are refitting the whole room anyway. Otherwise, resurfacing generally wins. Our bath re-enamelling starts from £350. We don’t add extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why Grindleton clients choose us
- CHAS, Constructionline and SafeContractor accredited
- Same prices wherever you are
- Colour-matched on site
- Everything repaired in place
Read our pricing and bath cost comparison.
When a repair is not the answer
To be straight with you, there are a few things a repair will not fix:
- A bath split right through the body
- A bath that is rusted through
- Damage hidden under a previous coating, until it’s stripped back
Send us photos and we’ll tell you honestly.
Materials we work on in Grindleton
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
Looking after it afterwards
Simple care helps the repair last. Our advice:
- Have chips seen to early
- Never use suction bath mats
- Do not leave bottles, razors or sponges standing on the surface
- Dry the bath after use to stop limescale
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Repair dripping taps promptly.
Rust spots on a worn bath get worse with time. Resurfacing before they spread keeps it simpler.
When to call us in Grindleton
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
The things customers typically mention when they call are:
- An outdated colour you’d like to change
- Several chips and rust patches
- A bath that stays dull however much you clean it
- Wear marks under the taps
What to look for in a quote
- How long the guarantee is and what it covers
- Whether there are any call-out or travel charges
- When it can be used again
- Whether the colour is mixed to match
About our accreditations · Every repair comes with a one-year guarantee.
