Cambridgeshire · England
Bath Re-enamelling in Haddon
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Haddon. Free, fixed quotes from your photos.
- Resurfacing from £350
- Lots of chips and rust spots
- Wear marks under the taps
Haddon questions
Is there any odour?
Some materials have a smell while they’re applied, so we ventilate the room. It clears as the materials cure.
Can you do the outside of a roll-top?
Yes. Inside and out.
Can a failed resurfacing be redone?
Yes. Removing the old finish takes extra time, which we include in the price.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
Is there a guarantee?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
Is it safe with children and pets around?
We ask you to keep children and pets out of the room while we work. The rest of the house is unaffected.
How soon can you come?
We’ll give you dates with your quote. Tell us if you need it done quickly.
Will the price change on the day?
The price is fixed for what the photos show. Anything extra is discussed before we begin.
Bath re-enamelling at your home in Haddon
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, so we don’t cut corners on it. We work on acrylic baths, pressed steel baths and Victorian roll-tops, and common reasons people contact us are several chips and rust patches and a dull, rough surface that won’t come clean.
Big or small, you get the same one-year guarantee in Haddon and across Cambridgeshire.
- Area
- Haddon (PE7)
- Area hub
- Cambridgeshire
- Warranty
- 12 months on all our work
- Price
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
How it works
Visits start with a quick look at the job together, so you know exactly what we are doing. Then the area is sheeted and masked and we start. You can expect it to take most of the day.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s normally ready the following day.
How to prepare
- Have somewhere for us to park nearby if possible
- Open a window if you can
- Tell us if there are stairs or a lift
How to get a price
If you are in Haddon and want a price, pictures are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Advice
Nearby places to Haddon
More services for Haddon
How to care for the repair
Good habits make a big difference to how long a repair lasts:
- Use washing-up liquid and a soft cloth
- Do not let dyes or oils sit on the finish
- Repair dripping taps early
- Wipe the bath dry after use in hard water areas
The first few days matter most: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Rust spots on a worn bath get worse with time and make the job bigger. Resurfacing before they spread keeps it simpler.
Landlord and trade work in Haddon
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.
Landlords, letting agents and housing providers in Haddon use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it typically costs far less than a refit.
What your bath is made of matters
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we check it carefully.
Covering Haddon
Haddon is about 2 miles west of Yaxley, in Cambridgeshire. We work in every kind of home, old or new, large or small, plus businesses and rented homes. We cover all 371 towns and villages in Cambridgeshire, from the larger towns to small villages. Our nearest city page is Birmingham, about 66 miles away.
Postcode districts we cover here: PE7. Close by, we cover Morborne (1 mile south), Chesterton (2 miles north-west), Alwalton (2 miles north), Orton Waterville (3 miles north) and Elton (4 miles west). Larger places within reach include Huntingdon (14 miles south-east), Whittlesey (9 miles east), Godmanchester (15 miles south-east), Ramsey (10 miles south-east), Brampton (14 miles south) and Sawtry (6 miles south).
What’s near Haddon
We visit homes around Parish Church of St Mary and Ormiston Bushfield Academy. Haddon’s nearest station is Peterborough station, about 4.8 miles north-east of the centre. Further afield, we also cover the area around Serpentine Green (2.7 miles north-east) and Peterborough District Hospital (4.7 miles north-east). Open spaces near Haddon include Orton Mere and Hampton Nature Reserve.
When a repair is not the answer
Before you book, it’s worth knowing the limits:
- Anything hidden under an old coating, until we remove it
- A bath split right through the body
- Acrylic that moves when you stand in it
Send us pictures and we will tell you honestly before booking.
Materials we work on in Haddon
- Acrylic baths
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
What affects the price in Haddon
Resurfacing from £350. We give every job a fixed quote from pictures. This is what makes a difference:
- Whether old repairs or coatings need taking off
- The material and finish
- How hard the colour is to match
- The size and number of damaged areas
A repair is priced on what needs doing, not your postcode. You will see the full price before you book, with nothing added on the day.
Send photos for a quote
Photographing the damage takes a minute, and it saves a visit. Try to send:
- A clear, close picture of the problem area
- Where you are, by postcode
- Whether it’s been repaired or coated before
- One picture of the entire bath
The quickest way to a price is to send two or three photos using our quote form or call us. We will say immediately whether it can be repaired.
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
If you do try a kit, read the instructions carefully, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
What we’re called out for in Haddon
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. After years of use, the surface becomes porous and stains easily.
People typically call us when they notice something like this:
- Several chips and rust patches
- An outdated colour you’d like to change
- A coating lifting around the plughole
- A dull, rough surface that will not come clean
Questions to ask before booking
- How to care for the finish
- If travel is included in the price
- What prep work is covered
- How changes to the job are handled
About our accreditations · Every repair comes with a one-year guarantee.
