Telford and Wrekin · England
Bath re-enamelling & resurfacing in Hadley, Telford and Wrekin
We travel to Hadley for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- A coating lifting around the plughole
- A dull, rough surface that won’t come clean
Should I try a DIY kit first?
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
About our bath re-enamelling in Hadley
We re-enamel plenty of period and roll-top baths, which would be difficult and expensive to replace. Resurfacing them in place keeps the original bath. We work on pressed steel baths, Victorian roll-tops and cast iron baths, and people most frequently call us about thin, worn enamel in places and an old resurfacing that’s failing.
A one-year guarantee comes as standard.
- Where
- Hadley (TF1, TF2)
- Region
- Telford and Wrekin
- Warranty
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Signs you need bath re-enamelling in Hadley
Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. After years of use, the surface becomes porous and stains easily.
These are the problems we’re asked about most:
- A bath in a colour that no longer suits
- Several chips and rust patches
- Stains that will not shift
- Worn patches where water runs and sits
Comparing quotes
- Is the price fixed, and does it include VAT?
- What aftercare is recommended
- How long the guarantee is and what it covers
- Whether they match the colour on site
About Hadley
Hadley is about 1 mile north-west of Telford, in Telford and Wrekin. We agree a date that works for you, and you will know when to expect us, so you are not left waiting in all day. Our repair technicians cover all 79 towns and villages in Telford and Wrekin. Our jobs stretch from Hadley to Birmingham (about 30 miles away).
Here we cover the TF1 and TF2 postcode area. We regularly work on streets such as Bolt Lane, Manse Road and Manor Road. Other places close to Hadley include Leegomery (1 mile north-west), Trench (1 mile north-east), Donnington Wood (2 miles east), Donnington (2 miles east) and Preston upon the Weald Moors (2 miles north). We also work in nearby towns such as Dawley (3 miles south), Newport (6 miles north-east), Priorslee (3 miles south-east), Stirchley (4 miles south-east), Randlay (3 miles south-east) and Sutton Hill (5 miles south).
Around Hadley
Typical jobs here are in homes near Hadley Learning Community - Primary Phase, Kings Head Public House and Holy Trinity. For rail, the closest station is Oakengates station, roughly 1.5 miles south-east. Nearby you will also find Telford Shopping Centre (2.3 miles south-east) and Princess Royal Hospital (1.4 miles north-west). Not far away are The Ercall.
FAQs for Hadley
Do I need to be at home?
Yes. We need access to the room while we work, at a time that suits you.
What areas do you cover?
The whole UK, including all of Telford and Wrekin. Send your postcode with your pictures and we will offer you dates.
Can you repair several things at once?
Of course, and it normally saves money. Just add the extra items to your photos and we will quote them together.
Is the work guaranteed?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
What happens if you find more damage?
Your quote covers the damage in the pictures. Anything extra is discussed before we begin.
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside if you’d like.
How much does bath re-enamelling cost in Hadley?
Resurfacing from £350. Every job gets a fixed quote from your pictures. Send a close-up and a picture of the entire item with your TF1 postcode.
How long does re-enamelling take?
One day for most baths, ready the following day. We give you timings with the quote.
What bath re-enamelling costs
Resurfacing from £350. There are no hourly rates or hidden extras. The price depends on:
- Unusual colours or finishes
- How many items we do on one visit
- Access to the area
- The type of damage
Set against the cost of replacement, repairing typically costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Send pictures for a quote
Two or three clear photos are generally enough. It helps if you send:
- What it’s made of, if you know
- A clear, close picture of the problem area
- A wider photo showing the whole bath
- The postcode, so we can plan the visit
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Towns and villages near Hadley
Other services in Hadley
Repairs by material
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
Repairing versus replacing in Hadley
Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing normally wins. Prices start from £350. We don’t add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why Hadley clients choose us
- We come to you, anywhere in the UK
- One price list for the whole UK
- CHAS, Constructionline and SafeContractor accredited
- One-year guarantee on every repair
Read our full price list or bath cost comparison.
When we would advise against a repair
Some jobs are not right for a repair, for example:
- A cast iron or steel bath that is cracked right through
- Damage hidden under a previous coating, until it’s stripped back
- Holes rusted through the metal
Send us pictures and we’ll tell you honestly.
Surfaces we repair
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
How to look after the repair
Looking after the surface is easy:
- Use washing-up liquid and a soft cloth
- Keep toiletries on a shelf rather than in the bath
- Respect the curing time we give you
- Fix dripping taps quickly
A quick rinse and wipe after use helps, especially in hard water areas, so limescale cannot build up.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
How it works
Your technician turns up at the time we agreed with you, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. The work itself takes most of the day, and the room is left clean and tidy.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can usually be used the following day.
Before we arrive
- Ensure the area is dry
- Mention any earlier repairs or resurfacing
- Have a window or extractor fan available
Get a quote
The quickest way to a price is to send two or three pictures using our quote form or ring us. We’ll say right away if a repair is the right fix.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
