Telford and Wrekin · England
Bath re-enamelling & resurfacing in Stirchley, Telford and Wrekin
Bath re-enamelling in Stirchley without the cost of replacing. Send us photos for a fixed quote, then book a visit.
- Resurfacing from £350
- Several chips and rust patches
- A coating lifting around the plughole
For landlords and businesses
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which is easier on the people living there.
Letting agents frequently send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
How we handle bath re-enamelling in Stirchley
If your bath is sound but looks tired, resurfacing is normally the best value. There’s no removal, plumbing or tiling involved. Common call-outs are for a bath that stays dull however much you clean it and chips and rust in more than one place, across Victorian roll-tops, acrylic baths and basins & shower trays.
All of our repairs are guaranteed for twelve months in Stirchley and everywhere else. If something goes wrong with the work, we come back.
- Location
- Stirchley (TF3, TF7, TF11)
- County
- Telford and Wrekin
- Guarantee
- 12 months on all our work
- Price
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Repairs by material
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
Where we work around Stirchley
Stirchley is about 1 mile south-east of Dawley, in Telford and Wrekin. We visit customers in Stirchley, so nothing has to leave your home. We work in 79 places across Telford and Wrekin. We work right across the region, from Stirchley to Birmingham (26 miles away).
Postcode districts we cover here: TF3, TF7 and TF11. Whether you live on Holmer Lane, Sandino Road and Grange Avenue or anywhere nearby, a technician can come to you. Nearby, we also work in Randlay (1 mile north), Madeley (1 mile south-west), Dawley (1 mile north-west), Malinslee (2 miles north-west) and Doseley (2 miles west). We also work in nearby towns such as Telford (3 miles north-west), Wellington (5 miles north-west), Oakengates (3 miles north), Newport (8 miles north), Newdale (3 miles north-west) and St George’s (3 miles north).
Around Stirchley
We visit homes around St James' Church, Grange Park Primary School and Telford Town Park and the streets around them. Also close by are Lakeside Academy (Telford) (within half a mile north), Boscobel Tavern (under half a mile north-east) and Madeley Academy (1.2 miles south-west). For rail, the closest station is Telford Central station, roughly 1.8 miles north of the centre. Well-known places in the area include Ryton Castle Hillfield (4 miles south-east) and Telford Shopping Centre (1.6 miles north). Green spaces nearby include The Ercall.
Common questions in Stirchley
What if the damage is worse than the pictures show?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
Will the bath be moved?
No. We resurface it in place, so the tiles and taps stay put.
Is there a call-out fee?
We don’t add a call-out fee. Your fixed price includes everything.
Can pets and children be at home?
Please keep children and pets out of the room during the visit and until it has cured. The rest of the house is unaffected.
Can you redo someone else’s repair?
In most cases. We remove the old repair before doing a new one, so let us know about it.
Will there be fumes?
A little, during the work. We set up ventilation and the smell fades as it cures.
Do you do work for letting agents?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses in Stirchley.
Do I have to be there?
Someone needs to let us in and show us the job. You don’t need to watch us work.
What happens on the day
Nothing needs to be moved out of the room beforehand. Everything we use comes in the van with us, lay protective sheets and start once you’re happy with the plan. It normally takes most of the day, and you can get on with other things while we are there.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the following day.
Preparing for the visit
- Clear the area around the damage
- Have a window or extractor fan available
- Let the surface dry out before the visit
Get a quote
There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.
Advice
Should I try a DIY kit first?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
Prices and what affects them
Prices start from £350. There’s no area surcharge for Stirchley. The price reflects:
- What kind of damage it is
- Any earlier repairs that need removing first
- What the surface is made of
- How many items we do on one visit
Our prices are the same across the UK, so there’s no premium for Stirchley. The job itself decides the price: how much damage, what it’s made of and how many items.
Send pictures for a quote
We price nearly every job from pictures. This is what to send:
- A coin or ruler next to the damage for scale
- Any details about the material
- Any earlier repairs or coatings
- A photo taken from further back
Email us a picture of the damage and a wider shot of the entire item, with your TF3 postcode, and we’ll reply with a fixed price.
When to call us in Stirchley
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
Most people get in touch when they notice something like this:
- An original cast iron bath that needs restoring
- Staining under the taps and around the waste
- A bath in a colour that no longer suits
- Thin, worn enamel in places
What to look for in a quote
- Who will actually do the work
- How long it needs to cure
- What happens if they find more damage
- How to care for the finish
How to look after the repair
It’s all simple stuff:
- Clean with a soft cloth and mild detergent
- Repair dripping taps early
- Respect the curing time we give you
- Never use suction bath mats
Wipe the bath dry after use where you can, especially in hard water areas, and rinse off any bath products.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
What else we do in Stirchley
What a repair can’t fix
We’d rather lose a job than do one that won’t last, so here’s what a repair cannot put right:
- Holes rusted through the metal
- Damage hidden under a previous coating, until it’s stripped back
- An acrylic bath that flexes badly underfoot
Send us pictures and we’ll tell you honestly before you book.
Materials we repair
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
About our accreditations · Every repair comes with a one-year guarantee.
