Telford and Wrekin · England
Bath re-enamelling & resurfacing in Newport, Telford and Wrekin
Full bath re-enamelling and resurfacing for homes and businesses in Newport and across Telford and Wrekin. Send photos for a free, fixed quote.
- Resurfacing from £350
- A coating lifting around the plughole
- Lots of chips and rust spots
What we do, step by step
We agree an arrival time beforehand. Once we’re there, the work takes a full day in most cases. The room is left tidy and ready to use once it has cured.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the day after, the bath is ready.
Getting ready for the visit
- Keep a parking space free if you can
- Move bottles, mats and clutter away from the area
- Let the surface dry out before the visit
Get a quote
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed quote without visiting.
Related advice
Bath re-enamelling in Newport without replacing anything
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. Whether it’s an original cast iron bath that needs restoring and several chips and rust patches, we can typically put it right, on cast iron baths, Victorian roll-tops and basins & shower trays alike.
You are covered for a year from the day of the repair. Just call us if there’s a problem and we will sort it.
- Location
- Newport (TF10)
- Area hub
- Telford and Wrekin
- Guarantee
- 12 months on all our work
- Quote
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Questions from Newport
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
Is it messy?
Dust sheets and masking go down before we start, and tidy up before we leave.
How durable is a resurfaced bath?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
What does bath re-enamelling cost?
Prices start from £350. We give a fixed quote from your photos. Send a close-up of the damage and a wider photo and your postcode.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Is it worth repairing rather than replacing?
Generally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.
Can landlords book you?
We do, regularly. We can quote for several properties together and work between tenancies.
What happens once I’ve sent photos?
We check the damage, the material and your postcode, then reply with a quote.
Also near Newport
Other services in Newport
Can I fix it myself?
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is what we repair.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported.
What affects the price in Newport
Resurfacing from £350. There’s no area surcharge for Newport. The price reflects:
- Where the damage is and how we get to it
- What the surface is made of
- Whether we combine several jobs
- The size and number of damaged areas
The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed quote from your pictures, so you know the cost before you book.
Getting a price from pictures
Phone photos are fine. Ensure they show:
- Daylight if possible, and no flash reflection
- Where you are, by postcode
- Any earlier repairs or coatings
- Something in shot to show the size
Most customers in Newport get their price from pictures. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Repair or replace: which is better?
Replacing a bath can take several days across several trades. Re-enamelling is one technician, usually one day. Prices start from £350. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
What you get with us
- Nothing taken out or refitted
- Accredited with CHAS, Constructionline and SafeContractor
- We come to you, anywhere in the UK
- No extra charge for your area
Read our pricing or resurfacing vs replacement cost guide.
How to care for the repair
Much of the damage we repair could have been avoided. These habits help:
- Store bottles off the bath
- Clean with a soft cloth and mild detergent
- Fix dripping taps quickly
- Respect the curing time we give you
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Common problems we fix in Newport
Enamel wears gradually. Years of cleaning, hard water and hot baths dull the surface, generally first under the taps and around the waste.
You may need us if you’ve spotted any of these:
- A coloured bath you want in white
- Thin, worn enamel in places
- Lots of chips and rust spots
- Stains that will not shift
What to look for in a quote
- How long it needs to cure
- Whether there are any call-out or travel charges
- What preparation is included
- Is the price fixed, and does it include VAT?
Landlords, agents and businesses in Newport
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
Our work in Newport
Newport is about 7 miles north-east of Telford, in Telford and Wrekin. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Our technicians cover 79 places in Telford and Wrekin, from the larger towns to small villages. Our jobs stretch from Newport to Birmingham (29 miles away).
Our visits in TF10 work the same way as everywhere else we cover. Whether you live on High Street, Market Mews and Station Road or a nearby road, we can come to you. Main roads around Newport include the A41 and B5062, so getting to you is simple. Neighbouring places we cover include Church Aston (1 mile south-west), Chetwynd Aston (1 mile south), Forton (2 miles north), Pave Lane (2 miles south-east) and Chetwynd (2 miles north-west). Further out, we also cover Telford (7 miles south-west), Wellington (7 miles south-west), Dawley (8 miles south-west), Oakengates (6 miles south-west), The Rock (7 miles south-west) and Newdale (7 miles south-west). As one of the bigger places in Telford and Wrekin, Newport sees plenty of our work.
Landmarks near Newport
We visit homes around Newport Church of England Voluntary Controlled Junior School, Congregational Church and The Burton Borough School. Nearby you’ll also find Aqualate Castle (1.3 miles east). The countryside around Newport includes Aqualate Mere and Loynton Moss.
About our accreditations · Every repair comes with a one-year guarantee.
