Lancashire · England
Bath re-enamelling & resurfacing in Haggate, Lancashire
Bath re-enamelling across Haggate and nearby, done in a single visit in most cases.
- Resurfacing from £350
- Thin, worn enamel in places
- A roll-top that is seen better days
What we do, step by step
Nothing needs to be moved out of the room beforehand. We bring everything we need with us, lay protective sheets and start once you are happy with the plan. It typically takes a full day, and you’re welcome to carry on with your day while we work.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Have somewhere for us to park nearby if possible
- Mention if the room is upstairs or in a flat
- Move bottles, mats and clutter away from the area
Get a quote
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Advice
Bath re-enamelling in Haggate without replacing anything
After re-enamelling, the bath has a smooth, glossy, new-looking surface, but without the cost and upheaval of a refit. It’s ideal if you like your bathroom but not the state of the bath. We work on acrylic baths, basins & shower trays and pressed steel baths, and common reasons people contact us are stains that won’t shift and enamel that’s lost its shine and feels rough.
All our work is covered by our one-year guarantee, wherever you are in Lancashire.
- Area
- Haggate (BB10)
- Region
- Lancashire
- Guarantee
- One year on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
When we would advise against a repair
Before you book, it’s worth knowing the limits too:
- An acrylic bath that flexes badly underfoot
- Leaks from fittings rather than the bath
- Anything hidden under an old coating, until we remove it
If in doubt, send photos and we’ll say what we think before you book.
Materials we work on in Haggate
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
For landlords and businesses
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
Haggate and the surrounding area
Haggate is about 2 miles south-east of Brierfield, in Lancashire. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Our technicians cover 482 places in Lancashire, from the larger towns to small villages. We work right across the region, from Haggate to Manchester (23 miles away).
Postcode districts we cover here: BB10. That includes homes on Nelson Road, Burnley Road and Halifax Road. Neighbouring places we cover include Cockden (1 mile south-east), Catlow (1 mile north-east), Southfield (1 mile north-east), Thursden (2 miles east) and Colne (3 miles north). Further out, we also cover Accrington (8 miles south-west), Rawtenstall (9 miles south-west), Clitheroe (9 miles north-west), Haslingden (9 miles south-west), Bacup (8 miles south) and Barnoldswick (7 miles north).
Local landmarks in Haggate
Our clients here include homes close to Queens Park, Sun Inn and St James' Church. Nearby too are Briercliffe Primary School (less than half a mile west) and Sir John Thursby Community College (1.1 miles south-west). The nearest railway station is Nelson station, roughly 1.6 miles north-west of the centre. Well-known places in the area include Burnley General Hospital (1.3 miles west) and Queen Street Mill Textile Museum (under half a mile south-west). Green spaces nearby include Rowley Lake and Towneley Castle Hill.
DIY repairs versus a professional job
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Haggate questions
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
What does bath re-enamelling cost?
Resurfacing from £350. We give a fixed price based on pictures of the damage. Send a close-up of the damage and a wider photo with your BB10 postcode.
Can you quote from photos?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
Will there be fumes?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
I’m a tenant. Can you help?
Yes. Check with your landlord; we can send the quote to them too.
Is it worth repairing rather than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Do you need to take the bath out?
No, it stays where it is. We work on the bath in place, with the room protected and ventilated.
How to care for the repair
Nothing complicated is needed, just a few sensible habits:
- Avoid suction-cup mats
- Stick to gentle, non-abrasive cleaners
- Have chips seen to early
- A dripping tap should be fixed promptly
The first few days matter most: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
What affects the price in Haggate
Prices start from £350. A fixed quote means you know the cost before booking. We look at:
- Doing more than one item at once
- Whether it’s a chip, crack, burn or wear
- What the surface is made of
- Whether old repairs or coatings need taking off
The price reflects the work involved, not your postcode. The full price is agreed before booking, with no extras added later.
Getting a price from pictures
You can usually get a fixed quote without us visiting. To make it quick:
- A close-up of the damage, in focus
- Details of any past repairs
- Where you are, by postcode
- What it’s made of, if you know
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them over. What comes back is a fixed quote, not a guess.
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is what we repair.
Common problems we fix in Haggate
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
Get in touch if you’ve noticed:
- A coloured bath you want in white
- Brown or grey marks that do not clean off
- Worn patches where water runs and sits
- Chips and rust in more than one place
Before you book anyone
- Who will actually do the work
- What aftercare is recommended
- What the guarantee covers, and for how long
- How the colour is matched
Towns and villages near Haggate
What else we do in Haggate
About our accreditations · Every repair comes with a one-year guarantee.
