Lancashire · England
Bath Re-enamelling for Trawden homes
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Trawden. Free, fixed quotes from your photos.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- Stains that will not shift
Landlord and trade work in Trawden
Housing associations and facilities teams use us for planned and reactive repairs in Lancashire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip.
Bath re-enamelling at your home in Trawden
Re-enamelling gives a worn bath a new glossy surface without a refit. It’s the answer when the entire bath is tired rather than one spot. If you are dealing with thin, worn enamel in places and a bath in a colour that no longer suits, we can help, whatever the material.
Peace of mind is built in: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.
- Where
- Trawden (BB8)
- Region
- Lancashire
- Warranty
- 12 months on all our work
- Price
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Nearby places to Trawden
What else we do in Trawden
What we do, step by step
On the day itself, there is little for you to do. Show us the job, point us to the room, and we’ll get on with it. The job generally runs to the best part of a day, tidy-up included.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Mention any parking restrictions or tricky access
- Have somewhere for us to park nearby if possible
- Let us know which floor the room is on
Get a quote
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can price the job without visiting.
Advice
FAQs for Trawden
Do you come to Trawden?
We do. We send a technician to Trawden for every job, and the price is the same as everywhere else.
Do the materials smell?
Some materials have a smell while they’re applied, which is why we ventilate. It clears as the materials cure.
What if the damage is worse than the pictures show?
The price is fixed for what the photos show. Anything extra is discussed before we begin.
Can you do the outside of a roll-top?
Yes, often. The inside is resurfaced, and we can refinish the outside as well.
Is it messy?
Dust sheets and masking go down before we start, and we clean up when we have finished.
Is a repair better than a new one?
Normally, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we will say so.
How long does re-enamelling last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
It’s been repaired before. Can you still fix it?
Generally, yes. The old repair comes out first, so let us know about it.
How we price bath re-enamelling
Resurfacing from £350. Prices are worked out job by job, from your pictures. The main factors are:
- Whether old repairs or coatings need taking off
- The type of damage
- Access to the area
- The material and finish
The price reflects the work involved, not your postcode. The full price is agreed before booking.
How to get a fixed quote
A couple of clear pictures is all it takes. It helps if you send:
- Whether it’s been repaired or coated before
- Where you are, by postcode
- Any details about the material
- A coin or ruler next to the damage for scale
For a price in Trawden, the easiest route is photos: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
What a repair can’t fix
Some problems need a builder, plumber or fitter rather than us:
- Acrylic that moves when you stand in it
- Anything hidden under an old coating, until we remove it
- Plumbing leaks, which need a plumber
Not sure? Send photos and we will give you a straight answer.
Surfaces we repair
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
Covering Trawden
Trawden is about 2 miles south-east of Colne, in Lancashire. We travel to customers in Trawden and nearby villages, so you don’t need to take anything anywhere. Trawden is one of 482 towns and villages in Lancashire we cover. Our jobs stretch from Trawden to Leeds (about 24 miles away).
Here we cover the BB8 postcode area. We regularly work on streets such as Back Lane, Back Colne Road and Trawden Hill and the roads around them. You will find Trawden on the B6250, which makes it straightforward to reach. Other places close to Trawden include Winewall (1 mile north), Laneshaw Bridge (1 mile north-east), Colne (2 miles north-west), Southfield (2 miles south-west) and Monkroyd (2 miles north-east). Further out, we also cover Burnley (6 miles south-west), Accrington (11 miles south-west), Nelson (3 miles west), Rawtenstall (12 miles south-west), Clitheroe (11 miles west) and Haslingden (13 miles south-west).
Around Trawden
In Trawden, that means homes near St Mary's Church, Colne Park High School and Sun Inn. For rail, the closest station is Colne station, about 1.9 miles west. Other landmarks nearby include Colne Public Library And Museum (1.8 miles north-west) and Pendle Community Hospital (3 miles west). Green spaces nearby include Rowley Lake and Noyna Hill.
Materials and what they mean for the repair
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.
Common problems we fix in Trawden
Enamel doesn’t fail overnight. Years of cleaning, hard water and hot baths wear the gloss away, starting where water runs and sits.
Keep an eye out for these signs:
- A coloured bath you want in white
- A period or roll-top bath worth keeping
- A coating lifting around the plughole
- Enamel that’s lost its shine and feels rough
Before booking anyone
- Whether the price covers travel
- What the guarantee covers, and for how long
- How your room will be protected
- How long it needs to cure
How to care for the repair
So the finish stays in good condition:
- Leave the bath for the full curing time before using it
- Use washing-up liquid and a soft cloth
- Never use suction bath mats
- Store bottles off the bath
A quick rinse and wipe after use helps, especially in hard water areas, to stop limescale building up.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.
About our accreditations · Every repair comes with a one-year guarantee.
