Gloucestershire · England
Bath Re-enamelling for Halmore homes
Local bath re-enamelling for Halmore: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Enamel that’s lost its shine and feels rough
- Brown or grey marks that do not clean off
About our bath re-enamelling in Halmore
Most baths are re-enamelled in a day. Nothing is disconnected or removed. Typical jobs include thin, worn enamel in places and stains that won’t shift, in cast iron baths, Victorian roll-tops and basins & shower trays.
Every job is backed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.
- Location
- Halmore (GL13)
- Region
- Gloucestershire
- Guarantee
- One year on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
When to call us in Halmore
Previous coatings can fail too, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
These are the problems we’re asked about most:
- A period or roll-top bath worth keeping
- A bath that stays dull however much you clean it
- Stains that won’t shift
- A peeling or bubbling previous coating
What your quote should include
- What happens if the damage is worse than the photos show
- How soon you can use it again
- The length of the guarantee and what it covers
- Whether the colour is mixed to match
Nearby places to Halmore
What else we do in Halmore
Repairing versus replacing in Halmore
A new bath means a plumber, lifting out the old bath, making good the walls and tiles and days without a bathroom. Re-enamelling renews the whole surface without moving it. Prices start from £350. No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Why us?
- CHAS, Constructionline and SafeContractor accredited
- Everything repaired in place
- Typically one visit, start to finish
- We come to you, anywhere in the UK
Take a look at our pricing or resurfacing vs replacement cost guide.
When a repair isn’t the answer
We’d rather lose a job than do one that will not last, so these are the limits:
- A poorly supported acrylic bath, until it’s firmed up
- Problems we cannot see until an old finish comes off
- Plumbing leaks, which need a plumber
Send us photos and we will tell you honestly before booking.
Materials we work on in Halmore
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
If you are set on a kit, follow its instructions closely, and give it the full curing time. If it fails, we can still put it right.
Landlords, agents and businesses in Halmore
For anyone letting property in or around Halmore, we can repair and quote for several addresses together. Just send photos for each address and we will come back with a combined price.
Landlords, letting agents and housing providers in Halmore use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
What affects the price in Halmore
Prices start from £350. There are no hourly rates or hidden extras. The price depends on:
- How easy the damage is to reach
- The material
- Previous DIY repairs that have to come out
- Whether it’s a chip, crack, burn or wear
Set against the cost of replacement, repairing typically costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.
Quotes from your pictures
Almost every job we do is priced from pictures. This is what we need:
- Good light, ideally daylight, without flash glare
- What it’s made of, if you know
- One picture of the whole bath
- A coin beside the damage so we can judge size
For a price in Halmore, the easiest route is photos: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
The process
We agree an arrival time beforehand. On site, it takes a full day. The room is left tidy.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
Getting ready for the visit
- Let us know which floor the room is on
- Tell us about parking, stairs or access
- Have somewhere for us to park nearby if possible
Ask for a price
Most customers in Halmore get their price from pictures. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Related advice
Repairs by material
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Questions from Halmore
What areas do you cover?
All of Gloucestershire, and the rest of the UK. There’s no extra charge for travel.
What happens after I send pictures?
We review the pictures and send a fixed quote with dates.
Can you redo someone else’s repair?
Normally, yes. We remove the old repair before doing a new one, so mention it when you send pictures.
Can a failed resurfacing be redone?
Yes. Removing the old finish takes extra time, which we include in the price.
Can you change the colour of my bath?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
Is the work guaranteed?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Will there be a smell?
A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.
Will there be fumes?
Yes, while we are applying the finish. We set up ventilation and the smell fades as it cures.
About Halmore
Halmore is about 8 miles north-east of Thornbury, in Gloucestershire. Our technicians come to customers in Halmore and the surrounding area, so nothing has to leave your home. Halmore is one of 470 places in Gloucestershire we cover. You can also see our page for Birmingham, about 57 miles away.
We cover every part of the GL13 postcode area. Local streets include Riddle Street and Slimbridge Lane. We also travel to Wanswell (1 mile south-west), Sharpness (1 mile west), Blakeney (3 miles north-west), Brain's Green (4 miles north-west) and Viney Hill (4 miles north-west). Larger places within reach include Gloucester (13 miles north-east), Stroud (9 miles east), Brockworth (15 miles north-east), Quedgeley (10 miles north-east), Lydney (4 miles west) and Tredworth (12 miles north-east).
What’s near Halmore
Locally, our jobs take us to homes close to St John the Evangelist's Church, among other places. Halmore’s nearest station is Cam & Dursley station, roughly 3.4 miles east of the centre. Further afield, we also cover the area around Vale Community Hospital (4.2 miles south-east) and Berkeley Castle (2.4 miles south). For a walk, there is WWT Slimbridge.
About our accreditations · Every repair comes with a one-year guarantee.
