Dorset · England
Bath Re-enamelling for Hampreston homes
Full bath re-enamelling and resurfacing for homes and businesses in Hampreston and across Dorset. Free, fixed quotes from your photos.
- Resurfacing from £350
- Enamel that’s lost its shine and feels rough
- Stains that will not shift
How we handle bath re-enamelling in Hampreston
A re-enamelled bath looks and feels like a new one, but without the cost and upheaval of a refit. It’s ideal if you like your bathroom but not the state of the bath. Typical jobs include a peeling or bubbling previous coating and stains that won’t shift, in pressed steel baths, basins & shower trays and Victorian roll-tops.
You’re covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Where
- Hampreston (BH21)
- Region
- Dorset
- Warranty
- A year, on every repair
- Quote
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Landlord and trade work in Hampreston
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Covering Hampreston
Hampreston is about 2 miles east of Wimborne Minster, in Dorset. We agree a date that works for you, and you’ll know when to expect us, so you’re not left waiting in all day. Hampreston is one of 462 places in Dorset where we work.
We work across the BH21 postcode area and the streets around it. From Ham Lane and Stapehill Road or anywhere nearby, we can come to you. We also cover the places around Hampreston: Little Canford (1 mile north-west), Longham (1 mile south-east), Knighton (1 mile south), Canford Magna (2 miles west) and Bearwood (2 miles south). Larger places within reach include Christchurch (8 miles south-east), Blandford Forum (11 miles north-west), Verwood (6 miles north), Broadstone (4 miles south-west), Corfe Mullen (4 miles west) and Swanage (13 miles south).
What’s near Hampreston
Our clients here include homes close to Ferndown Common, White Hart Inn and All Saints Church and the streets around them. Also close by are Hampreston Church of England Voluntary Aided First School (less than half a mile south) and Ferndown Upper School (1.3 miles north-east). Hampreston’s nearest station is Branksome station, roughly 4.5 miles south. Well-known places in the area include Alderney Hospital (3 miles south) and Stapehill Abbey (0.7 miles north).
Materials and what they mean for the repair
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
Should you replace it?
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Resurfacing from £350, with every job priced individually. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why choose Surface Doctor in Hampreston
- CHAS and Constructionline accredited
- Colour mixed on the day to match
- Same prices wherever you are
- Straight answers about what a repair can do
Read our full price list or resurfacing vs replacement cost guide.
Towns and villages near Hampreston
Also in Hampreston
Prices and what affects them
Resurfacing from £350. A fixed quote means you know the cost before booking. We take into account:
- How much damage there is
- Unusual colours or finishes
- Whether old repairs or coatings need taking off
- Whether we combine several jobs
The price reflects the work involved, not where you live. You will see the full price before booking.
Getting a price from pictures
When you take your pictures, a few simple things make all the difference:
- Any details about the material
- A picture taken from further back
- Where you are, by postcode
- Whether it’s been repaired or coated before
A quote takes minutes to ask for: photograph the damage, then the entire bath, include your postcode and send them to us. You will get a fixed quote, not an estimate.
What a repair cannot fix
Not everything can be repaired, and we would rather say so up front. Repairs won’t solve:
- Problems we can’t see until an old finish comes off
- Leaks from fittings rather than the bath
- Steel that has corroded right through
Not sure? Send photos and we will give you a straight answer.
What we work on
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
FAQs for Hampreston
Can you do the outside of a roll-top?
Yes. We can do the inside and outside.
Do the materials smell?
Some materials have a smell while they’re applied, so we ventilate the room. It fades as everything cures.
Can you repair something that is been repaired before?
In most cases. The old repair comes out first.
Is my repair covered?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Can a failed resurfacing be redone?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
What happens once I’ve sent photos?
We come back with a fixed quote. There’s no obligation to book.
How long is the bath unusable?
Most baths are done in a day and can be used the day after. We give you timings with the quote.
Signs you need bath re-enamelling in Hampreston
Enamel wears gradually. Years of cleaning, hard water and hot baths wear the gloss away, usually first under the taps and around the waste.
Look out for any of the following:
- An old resurfacing that’s failing
- An original cast iron bath that needs restoring
- Wear marks under the taps
- Brown or grey marks that do not clean off
Questions to ask before you book
- How the colour is matched
- Whether there are any call-out or travel charges
- Whether a trained technician does the job
- What happens if they find more damage
What we do, step by step
Your technician turns up at the time we agreed with you and checks the damage against your photos first. The floor and nearby surfaces are covered before any work starts. Most visits take most of the day, and the room is left clean and tidy.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the following day, the bath is ready.
Getting ready for the visit
- Avoid using the area for a few hours before we arrive
- Let us know about parking or access
- Clear toiletries, mats and anything else from around the area
Get a quote
There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
