Pembrokeshire · Wales

Bath Re-enamelling in Harbour Village

Full bath re-enamelling and resurfacing for homes and businesses in Harbour Village and across Pembrokeshire. Free, fixed quotes from your pictures.

  • Resurfacing from £350
  • Lots of chips and rust spots
  • Enamel that’s lost its shine and feels rough
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling near Harbour Village

DIY repairs versus a professional job

A DIY attempt isn’t a disaster. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

Bath re-enamelling at your home in Harbour Village

Many of the baths we re-enamel are period roll-tops, which are heavy, hard to move and costly to replace. Doing them in place keeps an original feature. Our repair technicians work on pressed steel baths, cast iron baths and acrylic baths, and people most frequently call us about a period or roll-top bath worth keeping and a peeling or bubbling previous coating.

You are covered for a year from the day of the repair. Just call us if there is a problem and we will sort it.

Before and after: an old basin refinished to bright white
Where
Harbour Village (SA64)
County
Pembrokeshire
Guarantee
12 months on all our work
Quotes
From £350. Fixed and free, based on pictures
Telephone
0345 017 0787
Updated
23 October 2026

What bath re-enamelling costs

Prices start from £350. There’s no charge for travel to Harbour Village. The price comes down to:

  • Where the damage is and how we get to it
  • The material
  • The colour and finish to match
  • Whether it’s a chip, crack, burn or wear

Compared with replacing, repairing normally costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.

Send pictures for a quote

Phone photos are fine. Ensure they show:

  • A coin or ruler next to the damage for scale
  • The material, if you know it
  • A wider photo showing the whole bath
  • One sharp close-up of the damage

Send us a photo of the damage and one of the entire item, with your SA64 postcode, and we will reply with a fixed quote.

Harbour Village and nearby

Harbour Village is about 14 miles north of Haverfordwest, in Pembrokeshire. Clients in Harbour Village get the same service as everywhere else we cover: a fixed quote from your photos, and a technician at your door on the day. We work in 223 places across Pembrokeshire.

We cover every part of SA64. Streets in the area include Quay Road, New Hill and Harbour Village, and we cover them all. Neighbouring places we cover include Goodwick (1 mile south), Wdig (1 mile south-west), Dyffryn (1 mile south), Penyraber (1 mile south) and Llanwnda (1 mile west). Further out, we also cover Haverfordwest (14 miles south), The Marsh (15 miles south), Tyddewi (15 miles south-west), Haroldston St. Issell's (15 miles south), Albert Town (15 miles south) and Newport (7 miles east).

Around Harbour Village

We visit homes around Holy Name V.R.C. School, Rose & Crown Hotel and Berachah Presbyterian Church and the streets around them. Harbour Village has its own railway station: Fishguard Harbour station. Further afield, we also cover the area around Last Invasion Gallery (1.4 miles south-east) and Parc Castell (1.4 miles south). Not far away are Carn Wnda.

Map of Harbour Village © OpenStreetMap contributors

Harbour Village: your questions answered

It’s been repaired before. Can you still fix it?

In most cases. We remove the old repair before doing a new one, so let us know about it.

Will the price change on the day?

The price is fixed for what the pictures show. Anything extra is discussed before we begin.

Will there be a smell?

There may be a mild smell during the work.

Are you a vetted contractor?

We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Can I get a quote without a visit?

Nearly always. We only ask to see it in person if the photos cannot show what we need.

Do you charge for travel?

Travel is included in the price, and we charge the same wherever you are.

Is my repair covered?

All our work carries our one-year guarantee. Ask us what it covers when you get your quote.

Does re-enamelling smell?

There is some smell while the coating is applied, which is why we ventilate the bathroom. It fades as the coating cures.

Do you need bath re-enamelling in Harbour Village?

Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.

If you can see any of these, send us a photo:

  • Lots of chips and rust spots
  • A bath that stays dull however much you clean it
  • Thin, worn enamel in places
  • A coating lifting around the plughole

Before you book anyone

  • Who turns up on the day
  • When it can be used again
  • How changes to the job are handled
  • Is the price fixed, and does it include VAT?

Our hiring checklist

What happens on the day

The work is clean and fairly quiet. We protect the area first, then the job itself takes most of the day. At the end we talk you through the curing time and the aftercare.

  1. First we look the bath over and confirm the finish.
  2. Taps, tiles and the floor are masked off.
  3. The bath is degreased, repaired and keyed.
  4. We apply the primer and then the finish coats.
  5. We remove the masking, tidy up and give you the curing time.

Before we arrive

  • Mention if the room is upstairs or in a flat
  • Keep pets and children out of the room while we work
  • Move bottles, mats and clutter away from the area

Get a quote

For a price in Harbour Village, photos are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

Get a free quote

Related advice

Repair or replace in Harbour Village?

Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing generally wins. Our bath re-enamelling starts from £350. We do not add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.

What you get with us

  • Most jobs done in one visit
  • One price list for the entire UK
  • Work done at your home or business
  • Accredited with CHAS, Constructionline and SafeContractor

Take a look at our pricing or bath cost comparison.

Work for landlords and builders

Landlords, letting agents and housing providers in Harbour Village use us as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.

We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

Keeping it looking good

After the repair has cured, a few habits help it last:

  • Fix dripping taps quickly
  • Store bottles off the bath
  • Leave the bath for the full curing time before using it
  • Rinse off hair dye, oils and bath bombs right away

Stick to mild, non-abrasive cleaners, do not use suction bath mats, and do not leave bottles or razors standing on the surface.

Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.

Repairs by material

Roll-top and period baths

We can resurface a roll-top inside and out, with the outside refinished as well.

Acrylic

Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.