Pembrokeshire · Wales
Bath re-enamelling & resurfacing in Tyddewi, Pembrokeshire
We travel to Tyddewi for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- Brown or grey marks that don’t clean off
- Enamel that is lost its shine and feels rough
Aftercare tips
How the surface is treated afterwards matters. Here’s what we suggest:
- Clean with a soft cloth and mild detergent
- Fix dripping taps quickly
- Have chips seen to early
- Keep toiletries on a shelf rather than in the bath
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Rust spots on a worn bath get worse with time and make the job bigger. It’s simpler to resurface before they spread.
Bath re-enamelling at your home in Tyddewi
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. If you’re dealing with staining under the taps and around the waste and a bath in a colour that no longer suits, we can help, whatever the material.
All our work comes with a one-year guarantee, wherever you are in Pembrokeshire.
- Location
- Tyddewi (SA62)
- Area hub
- Pembrokeshire
- Guarantee
- 12 months on all our work
- Quote
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Why repair rather than replace?
Replacing a bath can take several days across several trades. Resurfacing takes one technician and normally a day. Our bath re-enamelling starts from £350. We do not add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
What you get with us
- CHAS and Constructionline accredited
- Honest advice, even when it means no job
- A fixed quote before you book
- One-year guarantee on every repair
Read our full price list or bath cost comparison.
What we are called out for in Tyddewi
Previous coatings can fail too, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
Clients typically contact us about:
- A bath that stays dull however much you clean it
- Worn patches where water runs and sits
- Lots of chips and rust spots
- Brown or grey marks that do not clean off
What to look for in a quote
- Aftercare advice
- When it can be used again
- What happens if they find more damage
- Whether the price is fixed and includes VAT
Places near Tyddewi
What else we do in Tyddewi
Materials and what they mean for the repair
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we check it carefully.
What bath re-enamelling costs
Resurfacing from £350. You won’t pay by the hour. The price is based on:
- Where the damage is and how we get to it
- Whether old repairs or coatings need taking off
- How many areas need work
- The material and finish
The price reflects the work involved, not your postcode. You will see the full price before booking, with nothing added on the day.
How to get a fixed price
A couple of clear pictures is all it takes. It helps if you send:
- A coin beside the damage so we can judge size
- A picture taken from further back
- The postcode, so we can plan the visit
- Any earlier repairs or coatings
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them over. What comes back is a fixed quote, not a guess.
FAQs for Tyddewi
Can a failed resurfacing be redone?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Is it safe with children and pets around?
Yes, as long as they stay out of the room we’re working in. We’ll tell you when the room can be used again.
Do you need to take the bath out?
No. We resurface it in place, so the tiles and taps stay put.
Can tenants book a repair?
Yes, though it’s best to check with your landlord first. Landlords are frequently glad to have it sorted before the end of a tenancy.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Do you do work for letting agents?
We do, regularly. We can quote for several properties together and work between tenancies.
Does re-enamelling smell?
Yes, while we are applying the finish. We set up ventilation and the smell fades as it cures.
Is there a call-out fee?
There’s no separate call-out charge. Your fixed price includes everything.
Tyddewi and nearby
Tyddewi (Welsh: St Davids) is about 14 miles north-west of Haverfordwest, in Pembrokeshire. Wherever you are in the SA62 postcode area, we come to you. Our technicians cover 223 places in Pembrokeshire.
Postcode districts we cover here: SA62. That includes homes on High Street, Bryn Road and Sgwar y Groes. Main roads around Tyddewi include the A487, which makes travel easy. Nearby, we also work in Pembrokeshire (1 mile north-west), Trelerw (1 mile east), Whitchurch (3 miles east), Solfach (3 miles east) and Middle Mill (3 miles east). Within a short drive, we also cover Haverfordwest (14 miles south-east), Milford Haven (15 miles south-east), The Marsh (14 miles south-east), Fishguard (14 miles north-east), Goodwick (14 miles north-east) and Pill (15 miles south-east).
Around Tyddewi
In Tyddewi, that means homes near St Davids Cathedral Close: The Free School, St Non's Chapel and St. Davids Cross Hotel, among other places. Further afield, we also cover the area around Whitewell (under half a mile south-west) and Parc y Castell (0.6 miles west). Open spaces near Tyddewi include Carn Trefeiddan.
When a repair isn’t the answer
Not everything can be repaired, and we would rather say so up front. Repairs won’t solve:
- Anything hidden under an old coating, until we remove it
- A metal bath with a through crack
- An acrylic bath that flexes badly underfoot
Send us photos and we’ll tell you honestly.
What we work on
- Basins & shower trays
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
The process
You do not need to empty the room beforehand. We bring everything we need with us, put protection down and get going once we have agreed what we are doing. Most jobs take the best part of a day, and you are welcome to carry on with your day while we work.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the next day.
How to prepare
- Clear toiletries, mats and anything else from around the area
- Mention any earlier repairs or resurfacing
- Mention any parking restrictions or tricky access
Getting a price
Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and we will reply with a fixed quote. There is no charge for the quote and you are under no obligation.
Advice
Can I fix it myself?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
About our accreditations · Every repair comes with a one-year guarantee.
