Northamptonshire · England
Bath re-enamelling & resurfacing in Hardwick, Northamptonshire
Bath re-enamelling for Hardwick, without a refit. Get a fixed price from your pictures, then book a visit.
- Resurfacing from £350
- A dull, rough surface that won’t come clean
- A period or roll-top bath worth keeping
Bath re-enamelling in Hardwick, done in place
The bath stays where it is, so the taps, tiles and plumbing aren’t touched. Most baths are done in one visit, and can be used again the following day. Common call-outs are for a roll-top that’s seen better days and an outdated colour you’d like to change, in Victorian roll-tops, pressed steel baths and cast iron baths.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Area
- Hardwick (NN9)
- County
- Northamptonshire
- Cover
- One year on every repair
- Price
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
How we price bath re-enamelling
Prices start from £350. There is no area surcharge for Hardwick. What changes the price is:
- Unusual colours or finishes
- How many items we do on one visit
- The type of damage
- Previous DIY repairs that have to come out
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.
How to get a fixed quote
A couple of clear pictures is all it takes. Try to include:
- Something in shot to show the size
- Natural light rather than flash
- The postcode, so we can plan the visit
- Details of any past repairs
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
How to care for the repair
Aftercare is simple, and it makes a real difference:
- Fix dripping taps quickly
- Stick to gentle, non-abrasive cleaners
- Have chips seen to early
- Keep suction mats out of the bath
Rinse the bath and wipe it over after use, especially in hard water areas, to stop limescale building up.
On a worn bath, rust spots keep spreading and make the job bigger. It’s simpler to resurface before they spread.
What happens on the day
We work cleanly and quietly, so you can stay at home while we are there. We protect the area first, then the work takes the best part of a day. Before we leave, we explain how soon it can be used and how to care for it.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Clear the area around the damage
- Point us to the nearest place to park
- Mention any parking restrictions or tricky access
Getting a price
If you’re in Hardwick and want a price, photos are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Related advice
Repairing versus replacing in Hardwick
Replacing the bath means a plumber, removing a heavy bath, making good the walls and tiles and days without a bathroom. Re-enamelling renews the whole surface with the bath left where it is. Prices start from £350. No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Why Hardwick customers choose us
- Technicians who travel to you, UK-wide
- Colour mixed on the day to match
- A fixed quote before you book
- CHAS and Constructionline accredited
Read our pricing or resurfacing vs replacement cost guide.
Hardwick and the surrounding area
Hardwick is about 2 miles north-west of Wellingborough, in Northamptonshire. Wherever you are in the NN9 postcode area, a technician comes to you. Our repair technicians cover all 364 towns and villages in Northamptonshire, from the larger towns to small villages. You can also see our page for Birmingham, about 49 miles away.
Our visits in NN9 are booked in the same way as anywhere else. If you’re just outside Hardwick, we cover Little Harrowden (2 miles north-east), Orlingbury (2 miles north-east), Great Harrowden (2 miles east), Hatton Park (2 miles east) and Redhill Grange (2 miles east). Further out, we also cover Northampton (8 miles south-west), Corby (12 miles north), Kettering (6 miles north), Rushden (7 miles east), Market Harborough (13 miles north-west) and Desborough (9 miles north).
Landmarks near Hardwick
Locally, our jobs take us to homes close to Church of St Leonard and Weavers Academy. The closest station to Hardwick is Wellingborough station, about 3.4 miles east of the centre. Other landmarks nearby include Barton Seagrave Castle (5 miles north-east) and St Mary's Hospital (5.3 miles north). For a walk, there’s Finedon Cally Banks and Swanspool Lake.
When a repair is not the answer
We will always be straight with you, so here’s what a repair cannot fix:
- A metal bath with a through crack
- Holes rusted through the metal
- A poorly supported acrylic bath, until it’s firmed up
Send us pictures and we’ll tell you honestly before booking.
Surfaces we repair
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
Materials and what they mean for the repair
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
For landlords and businesses
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
If you manage property in Hardwick, we can repair and quote for several addresses together. Just send photos for each address and we’ll price them together.
FAQs for Hardwick
Do you cover the entire of Northamptonshire?
Everywhere in the UK, Hardwick included. There is no extra charge for travel.
Do you cover Hardwick?
We do. We send a technician to Hardwick for every job, with no extra charge for travel.
What does bath re-enamelling cost?
Prices start from £350. Because every job differs, we price from pictures. You know the full cost before anything is booked.
Will there be fumes?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
Do the materials smell?
There may be a mild smell during the work that clears as it cures.
I rent my home. Can I book you?
Yes. Check with your landlord; we can send the quote to them too.
Can you fix a peeling bath coating?
Typically, yes. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
What if the damage is worse than the photos show?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Places near Hardwick
Also in Hardwick
About our accreditations · Every repair comes with a one-year guarantee.
