North Lanarkshire · Scotland
Bath re-enamelling & resurfacing in Hareshaw, North Lanarkshire
Fixed-price bath re-enamelling in Hareshaw and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- A coloured bath you want in white
- Chips and rust in more than one place
About our bath re-enamelling in Hareshaw
After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, and we take our time over it. We work on cast iron baths, basins & shower trays and acrylic baths, and common reasons people contact us are an original cast iron bath that needs restoring and a dull, rough surface that won’t come clean.
The work is covered for a year after we finish. If anything isn’t right, ring us and we’ll come back.
- Area
- Hareshaw (ML1)
- County
- North Lanarkshire
- Warranty
- 12 months on all our work
- Price
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Aftercare tips
Most damage we see is avoidable. These habits help:
- Store bottles off the bath
- Repair dripping taps early
- Clean with a soft cloth and mild detergent
- Do not use the bath until it has fully cured
Use mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
If a previous coating is starting to peel, do not pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
For landlords and businesses
Landlords, letting agents and housing providers in Hareshaw use us as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
We’re used to working with agents and managing companies. Just send photos, the address and how to get access and we will handle the rest.
Should you replace it?
Replacing a bath can take several days across several trades. Re-enamelling is one technician, usually one day, and the bath is usable the day after. Resurfacing from £350, with every job priced individually. Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
Why Hareshaw clients choose us
- Colour mixed on the day to match
- A fixed quote before you book
- Most jobs done in one visit
- Same prices wherever you are
Read our prices page and guide to resurfacing and replacement costs.
Covering Hareshaw
Hareshaw is about 4 miles north of Wishaw, in North Lanarkshire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Hareshaw is one of 89 places in North Lanarkshire where we work. Our jobs stretch from Hareshaw to Glasgow (about 15 miles away).
Here we cover the ML1 postcode area. We regularly work on streets such as Wilsons Road and Hareshaw Road. Other places close to Hareshaw include Biggar Road (1 mile south-west), Newarthill (1 mile south-west), Cleland (2 miles south), Chapelhall (2 miles north-west) and Gartness (3 miles north-west). Within a short drive, we also cover Motherwell (4 miles south-west), Cumbernauld (9 miles north-west), Coatbridge (5 miles west), Airdrie (4 miles north-west), Wishaw (4 miles south) and Bellshill (5 miles west).
Local landmarks in Hareshaw
Typical jobs here are in homes near Brannock High School, among other places. The nearest railway station is Cleland station, roughly 1.6 miles south. Further afield, we also cover the area around Murdostoun Castle (2.4 miles south-east) and Cleland Hospital (1.7 miles south). Green spaces nearby include Baron's Haugh RSPB Reserve and Allanton House lake.
Nearby places to Hareshaw
More services for Hareshaw
Do you need bath re-enamelling in Hareshaw?
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
You may need us if you’ve spotted any of these:
- An old resurfacing that is failing
- Enamel that’s lost its shine and feels rough
- Brown or grey marks that do not clean off
- Lots of chips and rust spots
Comparing quotes
- What preparation is included
- Whether they match the colour on site
- How the room is protected while they work
- How to care for the finish
FAQs for Hareshaw
What does bath re-enamelling cost?
Resurfacing from £350. The exact price depends on the damage, so we quote from pictures. You’ll get a fixed figure before booking.
Do you work in Hareshaw?
We do. Technicians travel to Hareshaw from across the region, and the price is the same as everywhere else.
Can you redo someone else’s repair?
In most cases. The old repair comes out first.
Is there any odour?
Expect a mild smell while we are working that clears as it cures.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Will it make a mess?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Can you fix a peeling bath coating?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Can pets and children be at home?
Yes, as long as they stay out of the room we’re working in. We’ll let you know when it’s safe to use again.
Repairs by material
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
DIY repairs versus a professional job
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
How the visit works
On the day itself, there’s little for you to do. Show us the job, point us to the room, and we will get on with it. The job generally runs to most of the day, including clearing up.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the next day, the bath is ready.
Getting ready for the visit
- Avoid using the area for a few hours before we arrive
- Have a window or extractor fan available
- Have somewhere for us to park nearby if possible
How to get a price
To get a price, send two or three photos through our quote form or ring us. We’ll tell you honestly whether it can be repaired.
Advice
When a repair is not the answer
Before you book, it’s worth knowing the limits:
- A poorly supported acrylic bath, until it’s firmed up
- A bath that’s rusted through
- A bath split right through the body
Not sure? Send pictures and we will give you a straight answer.
What we work on
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
About our accreditations · Every repair comes with a one-year guarantee.
