Kirklees · England

Bath re-enamelling & resurfacing in Hartshead Moor Top, Kirklees

Problem with your bath in Hartshead Moor Top? We put it right where it is, mix the colour on the day and guarantee the work for a year.

  • Resurfacing from £350
  • A period or roll-top bath worth keeping
  • A coating lifting around the plughole
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Hartshead Moor Top?

Bath re-enamelling in Hartshead Moor Top without replacing anything

Many of the baths we re-enamel are period roll-tops, which are heavy, hard to move and costly to replace. Resurfacing them in place keeps the original bath. Common call-outs are for a roll-top that’s seen better days and a peeling or bubbling previous coating, on Victorian roll-tops, cast iron baths and basins & shower trays.

Your repair is guaranteed for a year, as with every job we do.

Location
Hartshead Moor Top (BD19, WF15, HD6)
County
Kirklees
Guarantee
A year, on every repair
Quote
From £350. Free and fixed, from your photos
Phone
0345 017 0787
Page updated
23 October 2026
Before and after: an old basin refinished to bright white

For landlords and businesses

We work for landlords, letting agents and housing providers in Hartshead Moor Top as well as householders. Repairing between tenancies keeps void periods short, and it normally costs far less than a refit.

Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.

When to call us in Hartshead Moor Top

In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.

Send us a photo if you notice any of these:

  • A coloured bath you want in white
  • Worn patches where water runs and sits
  • Chips and rust in more than one place
  • A roll-top that’s seen better days

What to look for in a quote

  • What happens if the damage is worse than the pictures show
  • How the room is protected while they work
  • What preparation is included
  • The length of the guarantee and what it covers

How to compare quotes

Common questions in Hartshead Moor Top

Is it safe with children and pets around?

Keep pets and children away from the work area on the day.

Can you change the colour of my bath?

Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.

Do you come to Hartshead Moor Top?

We do. Repair technicians travel to Hartshead Moor Top from across the region, with no extra charge for travel.

What does bath re-enamelling cost?

Prices start from £350. We give a fixed price from your photos. Send a close-up of the damage and a wider photo and your postcode.

Are you a vetted contractor?

We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Do you do work for letting agents?

Yes, frequently. We can quote for several properties together and work between tenancies.

What happens after I send photos?

We come back with a fixed price, normally with dates to choose from. There is no obligation to book.

Can you price it without visiting?

Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.

What bath re-enamelling costs

Prices start from £350. We give every job a fixed price from pictures. These are the things that affect it:

  • The material
  • How much damage there is
  • Unusual colours or finishes
  • How easy the damage is to reach

What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed price from your photos, so there are no surprises on the day.

Getting a price from photos

Photographing the damage takes a minute. Try to send:

  • A clear, close picture of the problem area
  • Daylight if possible, and no flash reflection
  • Whether it’s been repaired or coated before
  • A coin beside the damage so we can judge size

The quickest way to a price is to send a couple of photos through our quote form or call us. We’ll tell you honestly if a repair is the right fix.

Hartshead Moor Top and nearby

Hartshead Moor Top is about 1 mile west of Cleckheaton, in Kirklees. Whether you’re in the middle of Hartshead Moor Top or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Hartshead Moor Top is one of 189 towns and villages in Kirklees we cover. Our jobs stretch from Hartshead Moor Top to Leeds (10 miles away).

We work across the BD19, WF15 and HD6 postcode area and the streets around it. Jobs here include addresses on Walton Lane, Halifax Road and Scholes Lane. Being close to the A649, Hartshead Moor Top is simple for us to get to. Nearby, we also work in Hartshead Moor Side (1 mile east), Scholes (1 mile north), Hightown Heights (1 mile east), Thornhills (1 mile south-west) and Lower Wyke (1 mile north-west). Larger places within reach include Huddersfield (5 miles south), Dewsbury (5 miles south-east), Batley (4 miles east), Mirfield (3 miles south-east), Heckmondwike (3 miles east) and Meltham (10 miles south-west).

Landmarks near Hartshead Moor Top

In Hartshead Moor Top, that means homes near Scholes Village Primary School, The Priory at Whitechapel pub and St. James and St. Phillip Church, among other places. The closest station to Hartshead Moor Top is Brighouse station, about 2 miles south-west. Well-known places in the area include Transperience (2.2 miles north) and Halifax Rural District (2.8 miles west).

Map of Hartshead Moor Top © OpenStreetMap contributors

The process

On the day itself, there is little for you to do. Let us in and show us the room, and we will get on with it. The job generally runs to the best part of a day, including clearing up.

  1. The room is masked, protected and ventilated.
  2. We clean and degrease the bath and repair any chips or rust.
  3. We prepare the surface and apply a bonding primer.
  4. Several coats of new finish are sprayed on.
  5. Once cured, normally by the following day, the bath is ready.

Getting ready for the visit

  • Clear the area around the damage
  • Tell us about parking, stairs or access
  • Tell us about any previous repairs or coatings

Getting a price

If you are in Hartshead Moor Top and want a price, photos are the quickest way: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.

Get a free quote

Read more

Honest limits

Before booking, it’s worth knowing the limits too:

  • Acrylic that moves when you stand in it
  • Plumbing leaks, which need a plumber
  • A bath split right through the body

If in doubt, send photos and we’ll say what we think.

Materials we repair

  • Cast iron baths
  • Pressed steel baths
  • Victorian roll-tops
  • Basins & shower trays
  • Acrylic baths

DIY kit or professional repair?

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.

Why repair rather than replace?

If the bath is sound, re-enamelling is generally much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Resurfacing from £350, with every job priced individually. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

Why us?

  • Colour-matched on site
  • Same prices wherever you are
  • Straight answers about what a repair can do
  • Free fixed quotes from pictures

See our full price list and bath cost comparison.

How to look after the repair

Much of the damage we repair could have been avoided. A few tips:

  • A quick wipe after use keeps limescale away
  • Don’t leave bottles, razors or sponges standing on the surface
  • Do not use the bath until it has fully cured
  • Don’t let dyes or oils sit on the finish

Treat the new finish gently at first: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.

The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.