Kent · England
Bath Re-enamelling for Harvel homes
Damaged bath in Harvel? We repair it in place, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- Chips and rust in more than one place
Common questions in Harvel
How long does re-enamelling last?
Care for it and it lasts. Gentle cleaning, no suction mats.
Do you do work for letting agents?
Yes, often. We can quote for several properties together and work between tenancies.
Can you redo someone else’s repair?
In most cases. We remove the old repair before doing a new one.
What areas do you cover?
We work UK-wide, so Harvel is covered. Our prices are the same everywhere.
I rent my home. Can I book you?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit generally costs less than separate visits. Include pictures of each item.
Do you cover Harvel?
We do. Technicians travel to Harvel from across the region, and the price is the same as everywhere else.
When can you do it?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
How we handle bath re-enamelling in Harvel
A re-enamelled bath looks and feels like a new one, but without the cost and upheaval of a refit. It’s ideal if you like your bathroom but not the state of the bath. Typical jobs include an original cast iron bath that needs restoring and an outdated colour you’d like to change, in pressed steel baths, acrylic baths and Victorian roll-tops.
Big or small, you get the same one-year guarantee.
- Location
- Harvel (DA13)
- Area hub
- Kent
- Guarantee
- 12 months on all our work
- Quote
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
How to care for the repair
Nothing complicated is needed, just a few sensible habits:
- Get any chip repaired quickly
- A dripping tap should be fixed promptly
- Don’t leave bottles, razors or sponges standing on the surface
- Dry the bath after use to stop limescale
A quick rinse and wipe after use helps, especially in hard water areas, so limescale cannot build up.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
When to call us in Harvel
Enamel wears gradually. Years of cleaning, hard water and hot baths dull the surface, starting where water runs and sits.
If you can see any of these, send us a photo:
- Thin, worn enamel in places
- Several chips and rust patches
- Brown or grey marks that don’t clean off
- A coating lifting around the plughole
Before you book anyone
- What preparation is included
- Who turns up on the day
- What happens if the damage is worse than the photos show
- A fixed quote, and whether VAT is included
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
What your bath is made of matters
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we check it carefully.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
The process
A typical visit goes like this: we arrive on time, protect everything around the work area, carry out the work and tidy away. Allow the best part of a day from start to finish. Before we go, we will explain when it can be used and how to look after it.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the next day.
Before we arrive
- Point us to the nearest place to park
- Keep children and pets away from the room on the day
- Tell us about any previous repairs or coatings
Ask for a price
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Related advice
Harvel and the surrounding area
Harvel is about 6 miles south of Gravesend, in Kent. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Harvel is one of 922 towns and villages in Kent we cover. You can also see our page for London, about 23 miles away.
We work across DA13. That includes homes on St Francis Road, Hart Lane and Harvel Street and the roads around them. Close by, we cover Priestwood Green (1 mile north), Culverstone Green (1 mile south-west), Priestwood (1 mile north), South Street (1 mile north-west) and Vigo Village (1 mile south). Further out, we also cover Maidstone (9 miles south-east), Dartford (9 miles north-west), Sevenoaks (9 miles south-west), Royal Tunbridge Wells (15 miles south), Gravesend (6 miles north) and Tonbridge (11 miles south).
Near you in Harvel
Locally, our jobs take us to homes close to Culverstone Green Primary School, Church of Our Lady of the Meadow and Meopham School, among other places. For rail, the closest station is Sole Street station, about 2.7 miles north. Well-known places in the area include Leybourne Castle (3.6 miles south-east) and Coldrum Long Barrow (1.6 miles south). The countryside around Harvel includes Ranscombe Farm.
What affects the price in Harvel
Prices start from £350. Each job gets its own fixed price. These are the things that affect it:
- How many areas need work
- Whether it’s a chip, crack, burn or wear
- The colour and finish to match
- The material
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.
How to get a fixed price
We price nearly every job from photos. This is what we need:
- One picture of the entire bath
- A close-up of the damage, in focus
- Details of any past repairs
- Any details about the material
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them to us. What comes back is a fixed quote, not a guess.
Repairing versus replacing in Harvel
Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Resurfacing from £350, with every job priced individually. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it.
Why choose Surface Doctor in Harvel
- Accredited with CHAS, Constructionline and SafeContractor
- Every repair guaranteed for a year
- Dust sheets down, tidy finish
- Colour mixed on the day to match
Read our prices page or resurfacing vs replacement cost guide.
Landlord and trade work in Harvel
We work for landlords, letting agents and housing providers in Harvel as well as householders. Repairing between tenancies keeps void periods short, and it generally costs far less than a refit.
For anyone letting property in or around Harvel, we can repair and quote for several addresses together. Just send photos for each address and we’ll price them together.
Also near Harvel
Other services in Harvel
About our accreditations · Every repair comes with a one-year guarantee.
