Kent · England
Bath re-enamelling & resurfacing in Culverstone Green, Kent
Full bath re-enamelling and resurfacing at your home in Culverstone Green, with a one-year guarantee on every repair.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- A bath in a colour that no longer suits
Bath re-enamelling in Culverstone Green without replacing anything
Re-enamelling is a one-day job for most baths, with the bath ready to use the following day. Taps, tiles, panels and plumbing all stay in place. Our repair technicians work on basins & shower trays, acrylic baths and Victorian roll-tops, and common reasons people contact us are a period or roll-top bath worth keeping and chips and rust in more than one place.
Every job is backed for twelve months. If something goes wrong with the work, we come back.
- Location
- Culverstone Green (DA13, TN15)
- County
- Kent
- Guarantee
- One year on every repair
- Price
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What we do, step by step
Expect a friendly, tidy visit. We confirm the time with you beforehand, protect the area, and get on with the job, which normally takes most of the day. If anything looks different from your photos, we will talk to you before going ahead.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- Once cured, normally by the next day, the bath is ready.
Preparing for the visit
- Open a window if you can
- Tell us if there are stairs or a lift
- Have somewhere for us to park nearby if possible
Getting a price
Send us a photo of the damage and one of the whole item, with your DA13 postcode, and we will reply with a fixed quote.
Advice
Common questions in Culverstone Green
Do you charge for travel?
Travel is included in the price, with the same prices everywhere we work.
Can landlords book you?
We do, regularly. We can quote for several properties together and work between tenancies.
Can you redo someone else’s repair?
Yes, we often do. It can add a little time, which we include in the quote.
Does the bath have to be removed?
No. We resurface it in place, so nothing else is disturbed.
Can you repair several things at once?
Of course, and it normally saves money. Just add the extra items to your photos and you’ll get one combined price.
What happens next?
You’ll get a fixed quote back. There’s no obligation to book.
Someone resurfaced my bath and it’s peeling. Can you help?
Typically, yes. We strip the failing coating and resurface it properly. Mention it when you send photos.
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
Landlord and trade work in Culverstone Green
Housing associations and facilities teams use us for planned and reactive repairs in Kent and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip.
Aftercare tips
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Leave the bath for the full curing time before using it
- Never use suction bath mats
- Dry the bath after use to stop limescale
- Wash away dyes and oils after use
Wipe the bath dry after use where you can, especially in hard water areas, and rinse off any bath products.
On a worn bath, rust spots keep spreading and make the job bigger. It’s simpler to resurface before they spread.
What we cannot put right
A few problems are outside what a surface repair can do:
- Damage hidden under a previous coating, until it’s stripped back
- An acrylic bath that flexes badly underfoot
- Leaks from fittings rather than the bath
Send us photos and we’ll tell you honestly before booking.
What we work on
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
Repairing versus replacing in Culverstone Green
A refit takes several trades and several days. Re-enamelling takes one technician and usually one day, with the bath ready the following day. Prices start from £350. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Why us?
- Work done at your home or business
- One price list for the whole UK
- No need to remove anything
- Colours mixed by hand to suit your surface
Read our prices page or resurfacing vs replacement cost guide.
Signs you need bath re-enamelling in Culverstone Green
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
People normally call us when they notice one of these:
- A dull, rough surface that will not come clean
- Lots of chips and rust spots
- Stains that will not shift
- An original cast iron bath that needs restoring
What your quote should include
- What preparation is included
- What happens if they find more damage
- How the colour is matched
- How long the guarantee is and what it covers
Our work in Culverstone Green
Culverstone Green is about 6 miles south of Gravesend, in Kent. We agree a date that works for you, and you’ll know when to expect us, so there is no waiting around. We work in all 922 towns and villages in Kent. You can also see our page for London, about 22 miles away.
Our visits in DA13 and TN15 are booked in the same way as anywhere else. Local streets include Conifer Drive, Carters Hill Lane and Rhododendron Avenue, all of which we cover. We also travel to Vigo Village (1 mile south-east), Harvel (1 mile north-east), South Street (1 mile north), Hodsoll Street (1 mile west) and Priestwood Green (1 mile north-east). Further out, we also cover Maidstone (9 miles south-east), Dartford (9 miles north-west), Sevenoaks (8 miles south-west), Royal Tunbridge Wells (15 miles south), Gravesend (6 miles north) and Tonbridge (10 miles south).
Local landmarks in Culverstone Green
Around Culverstone Green, we work in homes near Culverstone Green Primary School, Meopham School and Trosley Country Park and the streets around them. The nearest railway station is Sole Street station, about 3.2 miles north of the centre. Further afield, we also cover the area around Leybourne Castle (3.8 miles south-east) and Coldrum Long Barrow (1.5 miles south-east).
What your bath is made of matters
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s the part we put right.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
Also near Culverstone Green
What else we do in Culverstone Green
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
A DIY attempt is not a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.
About our accreditations · Every repair comes with a one-year guarantee.
