Kent · England
Bath Re-enamelling for Priestwood Green homes
Bath re-enamelling in Priestwood Green without the cost of replacing. Get a fixed price from your pictures, then book a visit.
- Resurfacing from £350
- Brown or grey marks that don’t clean off
- A roll-top that’s seen better days
When a repair is not the answer
We won’t take on work that won’t last, so here’s what a repair cannot put right:
- Anything hidden under an old coating, until we remove it
- Leaks from fittings rather than the bath
- A poorly supported acrylic bath, until it’s firmed up
Not sure? Send pictures and we’ll give you a straight answer.
Materials we work on in Priestwood Green
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
How we handle bath re-enamelling in Priestwood Green
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. Common call-outs are for enamel that’s lost its shine and feels rough and stains that won’t shift, in Victorian roll-tops, cast iron baths and basins & shower trays.
The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.
- Location
- Priestwood Green (DA13)
- County
- Kent
- Cover
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Looking after it afterwards
After the repair has cured, a few habits help it last:
- Use washing-up liquid and a soft cloth
- Keep toiletries on a shelf rather than in the bath
- Do not leave a chip unrepaired
- Wipe the bath dry after use in hard water areas
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Also near Priestwood Green
More services for Priestwood Green
Can I fix it myself?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
Work for landlords and builders
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Signs you need bath re-enamelling in Priestwood Green
Previous coatings can fail too, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
Get in touch if you’ve noticed:
- A dull, rough surface that will not come clean
- Several chips and rust patches
- Staining under the taps and around the waste
- A peeling or bubbling previous coating
What to look for in a quote
- Whether the price is fixed and includes VAT
- How long it needs to cure
- How to care for the finish
- Whether they match the colour on site
About Priestwood Green
Priestwood Green is about 5 miles south of Gravesend, in Kent. Anywhere in DA13, we carry out the work at your property. Our technicians cover 922 places in Kent. You can also see our page for London, about 22 miles away.
Here we cover the DA13 postcode area. We also cover the places around Priestwood Green: Priestwood (1 mile north-east), Harvel (1 mile south), South Street (1 mile west), Culverstone Green (1 mile south-west) and Foxendown (1 mile north). Further out, we also cover Maidstone (9 miles south-east), Dartford (9 miles north-west), Sevenoaks (9 miles south-west), Gravesend (5 miles north), Tonbridge (11 miles south) and Northfleet (6 miles north).
Local landmarks in Priestwood Green
We visit homes around Church of Our Lady of the Meadow, Camer Park Country Park and Meopham School. Priestwood Green’s nearest station is Sole Street station, roughly 2.2 miles north. A little further out are Coldrum Long Barrow (2.1 miles south) and Leybourne Castle (4 miles south-east). Not far away are Ranscombe Farm.
Your questions about bath re-enamelling in Priestwood Green
Is there a call-out fee?
No. Our quotes include travel, with the same prices everywhere we work.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
Do you hold any accreditations?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
How do I book?
Use the quote form or ring 0345 017 0787, and we’ll take it from there.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners.
Do the materials smell?
There can be some smell while we work. It fades as everything cures.
What happens once I’ve sent photos?
You will get a fixed quote back, usually with dates to choose from. You are under no obligation.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
What bath re-enamelling costs
Resurfacing from £350. Prices are worked out job by job, from your photos. What matters most is:
- How much damage there is
- How hard the colour is to match
- Whether it’s a chip, crack, burn or wear
- Where the damage is and how we get to it
The price reflects the work involved, not where you live. The full price is agreed before you book, with no extras added later.
Quotes from your photos
When you take your photos, these tips help us give you a firm price:
- Daylight if possible, and no flash reflection
- A coin beside the damage so we can judge size
- Any details about the material
- A clear, close picture of the problem area
Email us a picture of the damage and a wider shot of the entire item, with your DA13 postcode, and we’ll reply with a fixed price.
How the visit works
There’s not much you need to do on the day. Show us the job, point us to the room, and we’ll get on with it. Most visits take the best part of a day.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can normally be used the day after.
Getting ready for the visit
- Tell us about parking, stairs or access
- Avoid using the area for a few hours before we arrive
- Make sure the room can be ventilated
Ask for a price
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Advice
What your bath is made of matters
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
About our accreditations · Every repair comes with a one-year guarantee.
