Central Bedfordshire · England
Bath Re-enamelling for Hatley St George homes
Full bath re-enamelling and resurfacing for homes and businesses in Hatley St George and across Central Bedfordshire. Send photos for a free, fixed quote.
- Resurfacing from £350
- Worn patches where water runs and sits
- An original cast iron bath that needs restoring
About our bath re-enamelling in Hatley St George
We do not move the bath, so the taps, tiles and plumbing aren’t touched. Most baths are done in one visit, with the bath ready to use the following day. Typical jobs include a roll-top that’s seen better days and an old resurfacing that’s failing, on acrylic baths, pressed steel baths and basins & shower trays.
You are covered for a year from the day of the repair. If anything is not right, ring us and we will sort it.
- Area
- Hatley St George (SG19)
- Region
- Central Bedfordshire
- Guarantee
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Why repair rather than replace?
Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing typically wins. Our bath re-enamelling starts from £350. The price reflects the work involved, not where you live. You will see the full price before booking.
Why us?
- Usually one visit, start to finish
- No need to remove anything
- Colours mixed by hand to suit your surface
- We leave the room as we found it
See our pricing or guide to resurfacing and replacement costs.
Different materials, different repairs
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Looking after it afterwards
It’s all simple stuff:
- Wash away dyes and oils after use
- Stick to gentle, non-abrasive cleaners
- Keep suction mats out of the bath
- Don’t leave a chip unrepaired
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
On a worn bath, rust spots keep spreading. It’s simpler to resurface before they spread.
Places near Hatley St George
More services for Hatley St George
Prices and what affects them
Prices start from £350. There are no hourly rates or hidden extras. The price depends on:
- The size and number of damaged areas
- Unusual colours or finishes
- The material
- Whether old repairs or coatings need taking off
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Send photos for a quote
Almost every job we do is priced from pictures. This is what we need:
- Natural light rather than flash
- Your postcode, so we can check dates
- Any earlier repairs or coatings
- A wider photo showing the entire bath
To get a price, send two or three pictures through our quote form or call us. We’ll tell you honestly whether it can be repaired.
When to call us in Hatley St George
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. That’s the point where re-enamelling makes sense.
Look out for these signs:
- An old resurfacing that’s failing
- Lots of chips and rust spots
- A period or roll-top bath worth keeping
- Staining under the taps and around the waste
Before you book anyone
- Is the price fixed, and does it include VAT?
- What prep work is covered
- Whether they match the colour on site
- Whether a trained technician does the job
What we do, step by step
From the moment we arrive, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes the best part of a day, depending on what we find, and we finish by cleaning up and talking you through the result.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s typically ready the next day.
Before we arrive
- Let us know which floor the room is on
- Let the surface dry out before the visit
- Point us to the nearest place to park
Ask for a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
Related advice
About Hatley St George
Hatley St George is about 6 miles north-east of Biggleswade, in Central Bedfordshire. We agree a date that works for you, and you’ll know when to expect us, so you’re not left waiting in all day. Hatley St George is one of 121 places in Central Bedfordshire where we work. Our jobs stretch from Hatley St George to London (about 44 miles away).
All of SG19 is within our area, from the main roads to the quietest streets. Neighbouring places we cover include East Hatley (1 mile south-east), Tadlow (2 miles south), Little Gransden (3 miles north), Wrestlingworth (3 miles south-west) and Gamlingay (3 miles west). We also work in nearby towns such as Biggleswade (6 miles south-west), Sandy (7 miles west), Shefford (11 miles south-west), Lower Stondon (12 miles south-west), Potton (4 miles west) and Arlesey (11 miles south-west).
Landmarks near Hatley St George
We visit homes around Church of St Denis and Church of St George and the streets around them. Other landmarks nearby include Biggleswade Hospital (6 miles south-west). Not far away are Buff Wood.
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Hatley St George: your questions answered
Does someone need to be in?
We need someone to let us in. You don’t need to watch us work.
When can you do it?
Your quote comes with available dates. Tell us if you need it done quickly.
Do you resurface freestanding baths?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Is it OK to have pets in the house?
Keep pets and children away from the work area on the day, so the repair is not disturbed while it cures.
What does bath re-enamelling cost?
Resurfacing from £350. We give a fixed quote from your pictures. Send a close-up and a picture of the whole item with your SG19 postcode.
Can you change the colour of my bath?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
Is the work guaranteed?
All our work carries a one-year guarantee. We’ll explain what it covers when we quote.
Is a repair better than a new one?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we will tell you.
Landlord and trade work in Hatley St George
We work for landlords, letting agents and housing providers in Hatley St George as well as householders. Repairing between tenancies keeps void periods short, and it normally costs far less than a refit.
For anyone letting property in or around Hatley St George, we can repair and quote for several addresses together. Just send photos for each address and we will price them together.
About our accreditations · Every repair comes with a one-year guarantee.
