Central Bedfordshire · England
Bath re-enamelling & resurfacing in Sandy, Central Bedfordshire
Our repair technicians come to Sandy for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- An outdated colour you’d like to change
- A roll-top that is seen better days
Bath re-enamelling in Sandy, done in place
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. Typical jobs include a dull, rough surface that won’t come clean and a coloured bath you want in white, in Victorian roll-tops, acrylic baths and pressed steel baths.
All of our repairs are guaranteed for twelve months. We return to put right any problem with the work.
- Location
- Sandy (SG19)
- Region
- Central Bedfordshire
- Warranty
- One year on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
How the visit works
Expect a friendly, tidy visit. We confirm the time with you beforehand, protect the area, then carry out the work, which normally takes most of the day. If we find something your pictures didn’t show, we’ll explain it before carrying on.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s normally ready the next day.
Preparing for the visit
- Have somewhere for us to park nearby if possible
- Clear the area around the damage
- Avoid using the area for a few hours before we arrive
Getting a price
Most customers in Sandy get their price from photos. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Related advice
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
Landlord and trade work in Sandy
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Questions from Sandy
Do I have to be there?
Yes. We need access to the room while we work, at a time that suits you.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Is a repair better than a new one?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we will tell you.
What information do you need?
Some pictures, your postcode and how to reach you. On the day, we only need access to the room.
Is there a guarantee?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Can tenants book a repair?
We’re happy to deal with the tenant, landlord or agent. Just ensure the landlord agrees.
Is there a smell?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
Should you replace it?
Replacing the bath means a plumber, removing a heavy bath, making good the walls and tiles and several days without a working bathroom. Re-enamelling gives the bath a new finish without moving it. Our bath re-enamelling starts from £350. A repair normally costs much less than people expect, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.
Why book with us
- Colours mixed by hand to suit your surface
- Most jobs done in one visit
- Straight answers about what a repair can do
- Dust sheets down, tidy finish
Take a look at our pricing and resurfacing vs replacement cost guide.
Nearby places to Sandy
Other services in Sandy
When a repair is not the answer
We would rather lose a job than do one that will not last, so here’s what a repair can’t put right:
- An acrylic bath that flexes badly underfoot
- A bath split right through the body
- A bath that’s rusted through
Send us pictures and we’ll tell you honestly before you book.
Materials we work on in Sandy
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
What your bath is made of matters
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel often rusts by the plughole, so we check it carefully.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Covering Sandy
Sandy is about 4 miles north-west of Biggleswade, in Central Bedfordshire. From the centre of Sandy to the outlying streets, the service is the same: a fixed price, a tidy visit and a guarantee. We work in all 121 towns and villages in Central Bedfordshire. Our jobs stretch from Sandy to London (45 miles away).
Our technicians cover all of the SG19 postcode area and the streets around it. Whether you live on London Road, High Street and Longfield Road or a nearby road, a technician can come to you. With the A1 and A603 close by, Sandy is simple for us to get to. We also travel to Beeston (1 mile south), Seddington (1 mile south), Stratford (2 miles south-east), Lower Caldecote (2 miles south) and Everton (2 miles east). We also work in nearby towns such as Biggleswade (4 miles south-east), Flitwick (13 miles south-west), Shefford (7 miles south), Ampthill (11 miles south-west), Lower Stondon (9 miles south) and Potton (3 miles east). Being one of Central Bedfordshire’s larger places, Sandy is somewhere we visit often.
Near you in Sandy
We visit homes around Church of St Swithun, Kings Arms Public House and Sandy Secondary School. For rail, the closest station is Sandy station, about 0.8 miles south-east of the centre. Well-known places in the area include Biggleswade Hospital (3.1 miles south-east) and Gannocks Castle (2.1 miles north). For a walk, there is The Riddy.
How we price bath re-enamelling
Prices start from £350. We charge the same across the UK, including Sandy. What changes the price is:
- How much damage there is
- Doing more than one item at once
- How hard the colour is to match
- Previous DIY repairs that have to come out
Set against the cost of replacement, repairing typically costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Getting a price from photos
Almost every job we do is priced from pictures. This is what to send:
- Daylight if possible, and no flash reflection
- Your postcode, so we can check dates
- Something in shot to show the size
- A wider photo showing the entire bath
Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you’ll get a fixed price back. There is no charge for the quote and no obligation.
Signs you need bath re-enamelling in Sandy
Previous coatings can fail too, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
Send us a photo if you notice any of these:
- Enamel that is lost its shine and feels rough
- A period or roll-top bath worth keeping
- A coloured bath you want in white
- A peeling or bubbling previous coating
What to look for in a quote
- Whether a trained technician does the job
- Whether the price covers travel
- Whether cleaning and preparation are in the price
- What aftercare is recommended
About our accreditations · Every repair comes with a one-year guarantee.
