Aberdeen · Scotland
Bath Re-enamelling for Hatton of Fintray homes
Full bath re-enamelling and resurfacing for homes and businesses in Hatton of Fintray and across Aberdeen. Free, fixed quotes from your photos.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- Chips and rust in more than one place
Bath re-enamelling at your home in Hatton of Fintray
If your bath is sound but looks tired, resurfacing is normally the best value. There’s no removal, plumbing or tiling involved. Whether it’s an outdated colour you’d like to change and worn patches where water runs and sits, we can usually put it right.
Every repair is covered by our one-year guarantee, wherever you are in Aberdeen.
- Location
- Hatton of Fintray (AB21)
- Area hub
- Aberdeen
- Warranty
- 12 months on all our work
- Price
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Honest limits
Honesty matters more than a booking, so here’s what a repair won’t do:
- Anything hidden under an old coating, until we remove it
- Steel that has corroded right through
- A bath split right through the body
Not sure? Send pictures and we will give you a straight answer.
Materials we work on in Hatton of Fintray
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
Questions from Hatton of Fintray
Can you re-enamel a roll-top bath?
Yes, frequently. We resurface the inside, and the outside can be refinished too.
Do you need to take the bath out?
No. We resurface it in place, so the tiles and taps stay put.
What happens once I’ve sent photos?
We check the damage, the material and your postcode, then reply with a quote.
How long does re-enamelling last?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
Do I need to be at home?
We need someone to let us in. After that, you can carry on with your day.
Can tenants book a repair?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged.
Can you resurface a pink bath in white?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Should you replace it?
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Our bath re-enamelling starts from £350. A repair usually costs much less than people expect, particularly next to the cost of replacement. Send photos and we will give you the exact figure.
Why book with us
- CHAS and Constructionline accredited
- We come to you, anywhere in the UK
- Colour-matched on site
- Same prices wherever you are
See our full price list and bath cost comparison.
When to call us in Hatton of Fintray
Previous coatings can fail too, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
Common reasons people in Hatton of Fintray contact us are:
- An outdated colour you’d like to change
- A dull, rough surface that won’t come clean
- Thin, worn enamel in places
- A coating lifting around the plughole
What your quote should include
- What happens if the damage is worse than the photos show
- Whether the price covers travel
- Whether the price is fixed and includes VAT
- How long it needs to cure
How to care for the repair
Looking after the surface is easy, and it makes a real difference:
- Dry the bath after use to stop limescale
- Store bottles off the bath
- Have chips seen to early
- Fix dripping taps quickly
The first few days matter most: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. It’s simpler to resurface before they spread.
How the visit works
Arrival times are agreed in advance, so you are not left guessing. Once we’re there, the work takes most of the day. We leave the room clean and ready to use once it has cured.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Tell us if there are stairs or a lift
- Mention any parking restrictions or tricky access
- Mention any earlier repairs or resurfacing
Get a quote
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed quote without visiting.
Related advice
What else we do in Hatton of Fintray
Landlord and trade work in Hatton of Fintray
We work for landlords, letting agents and housing providers in Hatton of Fintray as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which is easier on the people living there.
What your bath is made of matters
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Where we work around Hatton of Fintray
Hatton of Fintray is about 6 miles south-east of Inverurie, in Aberdeen. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Our technicians cover 63 places in Aberdeen, from the larger towns to small villages.
Every address in AB21 is covered. Streets in the area include Station Road, Hatton Court and Lairds Park. Other places close to Hatton of Fintray include Mill of Fintray (1 mile west), Blackburn (2 miles south), Kinmuck (3 miles north-west), Kinellar (3 miles south-west) and Kinmundy (3 miles east). Within a short drive, we also cover Aberdeen (8 miles south-east), Rosemount (8 miles south-east), Berryden (8 miles south-east), Ferryhill (9 miles south-east), New Aberdeen (9 miles south-east) and Dyce (4 miles south-east).
Landmarks near Hatton of Fintray
Typical jobs here are in homes near Old Parish Church. For rail, the closest station is Kintore station, about 3.2 miles west of the centre. Further afield, we also cover the area around Kingseat Hospital (4.4 miles north-east) and Hallforest Castle (3.9 miles west). Green spaces nearby include Temple Hill.
About our accreditations · Every repair comes with a one-year guarantee.
