Warwickshire · England
Bath re-enamelling & resurfacing in Hatton, Warwickshire
Damaged bath in Hatton? We repair it in place, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- Staining under the taps and around the waste
- Lots of chips and rust spots
Signs you need bath re-enamelling in Hatton
Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. After years of use, the surface becomes porous and stains easily.
Clients normally contact us about:
- Brown or grey marks that don’t clean off
- An original cast iron bath that needs restoring
- Thin, worn enamel in places
- Enamel that’s lost its shine and feels rough
Before booking anyone
- What protection goes down before work starts
- The length of the guarantee and what it covers
- What happens if they find more damage
- Whether a trained technician does the job
How we handle bath re-enamelling in Hatton
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, so we don’t cut corners on it. We work on basins & shower trays, pressed steel baths and cast iron baths, and the jobs we see most are a bath in a colour that no longer suits and an old resurfacing that’s failing.
A one-year guarantee comes as standard, so you are covered after the visit.
- Area
- Hatton (CV35)
- Area hub
- Warwickshire
- Guarantee
- 12 months on all our work
- Price
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is what we repair.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
The process
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, and get on with the job, which typically takes a full day. If we find something your photos didn’t show, we’ll explain it before carrying on.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the day after.
Getting ready for the visit
- Move bottles, mats and clutter away from the area
- Mention any parking restrictions or tricky access
- Tell us if there are stairs or a lift
Ask for a price
The quickest way to a price is to send two or three pictures through our quote form or call us. We’ll tell you honestly whether it can be repaired.
Read more
Hatton questions
What do you need from me?
Send photos through the quote form or call 0345 017 0787, and we’ll take it from there.
Is there any odour?
It depends on the job, but frequently a little. Open windows and an extractor fan help, and it soon fades.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Do I need to be at home?
We need someone to let us in. You don’t need to watch us work.
Can I add another job to the visit?
Yes, and it’s often cheaper. Just add the extra items to your pictures and you will get one combined price.
Is it OK to have pets in the house?
Keep pets and children away from the work area on the day, so the repair is not disturbed while it cures.
Can you change the colour of my bath?
Yes, most people go for white. Mention the colour you want when you send photos.
Will the bath be moved?
No, it stays where it is. Everything is done in your bathroom, with the room masked and ventilated.
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Work for landlords and builders
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip.
What bath re-enamelling costs
Prices start from £350. You will not pay by the hour. The price depends on:
- The colour and finish to match
- What the surface is made of
- How many areas need work
- Where the damage is and how we get to it
No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Getting a price from pictures
Good photos mean an accurate price. Here’s what we find most useful:
- A photo taken from further back
- What it’s made of, if you know
- Good light, ideally daylight, without flash glare
- Something in shot to show the size
Send us pictures of the damage and one of the entire item, and tell us you are in Hatton, and we will reply with a fixed price.
Should you replace it?
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Resurfacing from £350, with every job priced individually. A repair generally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why us?
- Same prices wherever you are
- Accredited with CHAS, Constructionline and SafeContractor
- Free fixed quotes from pictures
- Normally one visit, start to finish
Take a look at our full price list and bath cost comparison.
About Hatton
Hatton is about 3 miles north-west of Warwick, in Warwickshire. From the centre of Hatton to the outlying streets, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Hatton is one of 324 places in Warwickshire we cover. Our nearest city page is Birmingham, about 16 miles away.
Our technicians cover all of the CV35 postcode area and the streets around it. You will find streets such as Crimscote Square, Station Road and Hornton Grove, all of which we cover. Neighbouring places we cover include Hampton Magna (1 mile south), Hampton on the Hill (2 miles south), Lower Norton (2 miles south-west), Pinley Green (3 miles west) and Longbridge (3 miles south-east). Within a short drive, we also cover Warwick (3 miles south-east), Royal Leamington Spa (4 miles east), Stratford-upon-Avon (8 miles south-west), Bedworth (14 miles north-east), Leamington Spa (4 miles east) and Kenilworth (4 miles north-east).
Around Hatton
Our customers here include homes close to Church of St Michael, The Ferncumbe CofE Primary School and Aylesford School and the streets around them. The closest station to Hatton is Warwick Parkway station, roughly 1.3 miles south-east of the centre. Other landmarks nearby include Warwick Castle (2.4 miles south-east) and Market Hall Museum (2.2 miles south-east). The countryside around Hatton includes Oxpen Meadow Lake.
How to look after the repair
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Wash away dyes and oils after use
- Leave the bath for the full curing time before using it
- A quick wipe after use keeps limescale away
- Don’t leave bottles, razors or sponges standing on the surface
A quick rinse and wipe after use helps, especially in hard water areas, to stop limescale building up.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Nearby places to Hatton
More services for Hatton
About our accreditations · Every repair comes with a one-year guarantee.
