Falkirk · Scotland
Bath re-enamelling & resurfacing in Head of Muir, Falkirk
Bath re-enamelling across Head of Muir and nearby, typically in one visit.
- Resurfacing from £350
- An outdated colour you’d like to change
- Staining under the taps and around the waste
Bath re-enamelling at your home in Head of Muir
If your bath is sound but looks tired, resurfacing is normally the best value. There is no removal, plumbing or tiling involved. We work on Victorian roll-tops, acrylic baths and cast iron baths, and the jobs we see most are a period or roll-top bath worth keeping and staining under the taps and around the waste.
All our work is covered by a one-year guarantee.
- Where
- Head of Muir (FK6, FK4)
- Area hub
- Falkirk
- Guarantee
- One year on every repair
- Price
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Head of Muir questions
Do you cover the entire of Falkirk?
Everywhere in the UK, Head of Muir included. Travel is included in the price.
Can you price it without visiting?
Generally, yes. A close-up and a wider photo are enough to give a fixed quote.
Will there be fumes?
There is some smell while the coating is applied, so we ventilate the room. It fades as the coating cures.
I rent my home. Can I book you?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Can you make a coloured bath white?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
How quickly can you book me in?
We will give you dates with your quote. Tell us if you need it done quickly.
How long will the bath be out of use?
Usually a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
What bath re-enamelling costs
Prices start from £350. There are no hourly rates or hidden extras. The price is based on:
- The colour and finish to match
- Whether we combine several jobs
- The material
- Whether it’s a chip, crack, burn or wear
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
How to get a fixed quote
We price nearly every job from photos. This is what we need:
- Whether it’s been repaired or coated before
- Something in shot to show the size
- A clear, close picture of the problem area
- The material, if you know it
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.
Landlord and trade work in Head of Muir
For anyone letting property in or around Head of Muir, we can repair and quote for several addresses together. Just send photos for each address and we will price them together.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
Keeping it looking good
Simple care helps the repair last. Our advice:
- Avoid suction-cup mats
- Rinse off hair dye, oils and bath bombs immediately
- Keep toiletries on a shelf rather than in the bath
- A quick wipe after use keeps limescale away
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Repair dripping taps promptly.
Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Places near Head of Muir
Also in Head of Muir
Should you replace it?
There are times replacing is better: if the bath is cracked through, if you want a different size or shape, or if you’re refitting the entire room anyway. In most other cases, resurfacing is the better choice. Resurfacing from £350, with every job priced individually. No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
What you get with us
- Everything repaired in place
- CHAS and Constructionline accredited
- A fixed quote before booking
- One-year guarantee on every repair
See our pricing and resurfacing vs replacement cost guide.
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
What your bath is made of matters
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Covering Head of Muir
Head of Muir is about 1 mile south of Denny, in Falkirk. Anywhere in FK6, a technician comes to you. Our repair technicians cover all 50 towns and villages across Falkirk. Our jobs stretch from Head of Muir to Glasgow (about 18 miles away).
Postcode districts we cover here: FK6 and FK4. We regularly work on streets such as Annet Road, Denny Road and Drove Road and the roads around them. We also travel to Dennyloanhead (1 mile south), Denny (1 mile north), Stoneywood (1 mile north-west), Dunipace (1 mile north) and Fankerton (2 miles north-west). Larger places within reach include Falkirk (5 miles east), Grangemouth (7 miles east), Bo'ness (12 miles east), Larbert (3 miles north-east), Stenhousemuir (4 miles east) and Bantaskin (4 miles east).
Landmarks near Head of Muir
In Head of Muir, that means homes near Denny High School and Bonnybridge Parish Church, among other places. Head of Muir’s nearest station is Larbert station, about 3.1 miles east. Nearby you will also find Herbertshire Castle (1.3 miles north) and Forth Valley Royal Hospital (2.6 miles north-east). The countryside around Head of Muir includes Myot Hill.
What we’re called out for in Head of Muir
Many baths we resurface have simply been well used, with nothing wrong except the surface. Underneath, a cast iron or steel bath is usually as strong as ever.
Common reasons people in Head of Muir contact us include:
- Several chips and rust patches
- An outdated colour you’d like to change
- A roll-top that’s seen better days
- A bath that stays dull however much you clean it
What your quote should include
- Whether the colour is mixed to match
- What prep work is covered
- What aftercare is recommended
- How your room will be protected
What we do, step by step
We work cleanly and quietly, so you can carry on at home. We protect the area first, then the work takes a full day. At the end we talk you through how soon it can be used and how to care for it.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the following day, the bath is ready.
Getting ready for the visit
- Let us know about parking or access
- Point us to the nearest place to park
- Tell us if there are stairs or a lift
Get a quote
You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
