Stirling · Scotland
Bath re-enamelling & resurfacing in Borestone, Stirling
Full bath re-enamelling and resurfacing for homes and businesses in Borestone and across Stirling. Free, fixed quotes from your photos.
- Resurfacing from £350
- Worn patches where water runs and sits
- An original cast iron bath that needs restoring
Looking after it afterwards
So the finish stays in good condition for years:
- A quick wipe after use keeps limescale away
- Do not leave a chip unrepaired
- Wash away dyes and oils after use
- Repair dripping taps early
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
Rust spots on a worn bath get worse with time and make the job bigger. It’s simpler to resurface before they spread.
About our bath re-enamelling in Borestone
Re-enamelling gives a worn bath a new glossy surface without a refit. It suits baths that are dull, stained, rough or chipped all over. We work on cast iron baths, acrylic baths and basins & shower trays, and the jobs we see most are a bath in a colour that no longer suits and lots of chips and rust spots.
Whatever the size of the job, you get the same one-year guarantee.
- Location
- Borestone (FK7)
- Area hub
- Stirling
- Warranty
- One year on every repair
- Quote
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Places near Borestone
More services for Borestone
Where we work around Borestone
Borestone is about 2 miles south of St. Ninians, in Stirling. From the centre of Borestone to the outlying streets, the service is the same: a fixed quote, a tidy visit and a guarantee. We cover 55 places across Stirling, from the larger towns to small villages. We work right across the region, from Borestone to Glasgow (20 miles away).
Here we cover the FK7 postcode area. From New Line Road and Chartershall Road or anywhere nearby, a technician can come to you. If you are just outside Borestone, we cover Chartershall (1 mile north), Broomridge (1 mile north-east), Bannockburn (1 mile north-east), Dunipace (4 miles south) and Fankerton (4 miles south). Within a short drive, we also cover Stirling (3 miles north), Dunblane (8 miles north), Raploch (3 miles north), Cornton (4 miles north), Bridge of Allan (5 miles north) and Riverside (3 miles north).
Near you in Borestone
The closest station to Borestone is Stirling station, about 2.7 miles north of the centre. A little further out are Thistles Centre (2.6 miles north) and Stirling Castle (3 miles north). Not far away are Gillies Hill and Airthrey Loch.
What affects the price in Borestone
Resurfacing from £350. You will not pay by the hour. The price depends on:
- Any earlier repairs that need removing first
- Unusual colours or finishes
- Doing more than one item at once
- What kind of damage it is
Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
How to get a fixed price
You can take the pictures on your phone, there is no need for anything special. Just ensure we can see:
- Natural light rather than flash
- Details of any past repairs
- Any details about the material
- The postcode, so we can plan the visit
We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
When we’d advise against a repair
In fairness, some problems need a different fix:
- Problems we can’t see until an old finish comes off
- Holes rusted through the metal
- A metal bath with a through crack
Not sure? Send photos and we will give you a straight answer before you book.
Materials we work on in Borestone
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
What happens on the day
Nothing needs to be moved out of the room. Everything we use comes in the van with us, lay protective sheets and get going once we’ve agreed what we’re doing. It usually takes the best part of a day, and you can get on with other things while we’re there.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s normally ready the next day.
Getting ready for the visit
- Have a window or extractor fan available
- Clear toiletries, mats and anything else from around the area
- Make sure the area is dry
Ask for a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.
Read more
Your questions about bath re-enamelling in Borestone
How durable is a resurfaced bath?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
Is it safe with children and pets around?
Keep pets and children away from the work area on the day.
Can you do the outside of a roll-top?
Yes. Inside and out if you’d like.
Is there a guarantee?
All our work carries our one-year guarantee. We’ll explain what it covers when we quote.
It’s been repaired before. Can you still fix it?
Yes, regularly. It can add a little time, which we include in the quote.
Do you charge for travel?
Travel is included in the price, with the same prices everywhere we work.
Is there a smell?
Some odour is normal while we spray, so we ventilate the room. It clears as the finish cures.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
Landlord and trade work in Borestone
For anyone letting property in or around Borestone, we can repair and quote for several addresses together. Just send pictures for each address and we’ll price them together.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Materials and what they mean for the repair
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is what we repair.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
DIY kit or professional repair?
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Repair or replace in Borestone?
A new bath means a plumber, removing a heavy bath, re-tiling or making good the walls and days without a bathroom. Re-enamelling renews the entire surface without moving it. Resurfacing from £350, with every job priced individually. The price depends on the type and amount of damage, the material and how many items we do on one visit. You get a fixed quote from your pictures, so you know the cost before you book.
Why Borestone clients choose us
- A fixed quote before you book
- Honest advice, even when it means no job
- Work done at your home or business
- Every repair guaranteed for a year
See our full price list or guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
