Surrey · England
Bath Re-enamelling for Heathrow homes
Bath re-enamelling in and around Heathrow: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Brown or grey marks that do not clean off
- An outdated colour you’d like to change
Repair or replace in Heathrow?
When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Tiles, panels and taps stay put. Resurfacing from £350, with every job priced individually. What it costs depends on the type and amount of damage, the material and how many jobs we combine into one visit. You get a fixed price from your photos, so you know the cost before booking.
Why us?
- Normally one visit, start to finish
- Colour mixed on the day to match
- CHAS and Constructionline accredited
- Work done at your home or business
See our prices page or resurfacing vs replacement cost guide.
Bath re-enamelling in Heathrow, done in place
Most baths are re-enamelled in a day, with the bath ready to use the following day. Taps, tiles, panels and plumbing all stay in place. We’re often asked to fix a roll-top that’s seen better days and chips and rust in more than one place, across cast iron baths, basins & shower trays and Victorian roll-tops.
Peace of mind is built in: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.
- Area
- Heathrow (TW6)
- Region
- Surrey
- Guarantee
- A year, on every repair
- Price
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
When to call us in Heathrow
Hard water speeds up the wear, and abrasive cleaners do the most damage.
Most people get in touch when they notice something like this:
- Thin, worn enamel in places
- A coating lifting around the plughole
- Enamel that’s lost its shine and feels rough
- Stains that will not shift
Before you book anyone
- Whether a trained technician does the job
- How soon you can use it again
- How the colour is matched
- How the room is protected while they work
How we price bath re-enamelling
Resurfacing from £350. You won’t pay by the hour. The price is based on:
- How hard the colour is to match
- What kind of damage it is
- How much damage there is
- Access to the area
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
Getting a price from pictures
Good photos mean an accurate price. Here’s what helps:
- A picture taken from further back
- A close-up of the damage, in focus
- Something in shot to show the size
- What it’s made of, if you know
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them to us. What comes back is a fixed price, not a guess.
Different materials, different repairs
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
For landlords and businesses
Letting agents often send us pictures straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
We carry out planned and one-off repairs for housing associations and facilities teams in Surrey and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
The process
Once we’re through the door, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes a full day, and we finish with a tidy-up and a look at the finished work together.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- The bath is left to cure and can generally be used the following day.
How to prepare
- Tell us about parking, stairs or access
- Make sure the area is dry
- Keep a parking space free if you can
Get a quote
You do not need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Advice
Heathrow and the surrounding area
Heathrow is about 2 miles north-west of Feltham, in Surrey. Customers in Heathrow get the same service as everywhere else we cover: a fixed price from your photos, then a visit to do the work. Our repair technicians cover all 395 towns and villages across Surrey. Our nearest city page is London, about 16 miles away.
Our visits in TW6 are booked in the same way as anywhere else. Nearby, we also work in West Bedfont (1 mile south-west), Hatton (1 mile east), Bedfont (1 mile south-east), Stanwell (1 mile south-west) and Harlington (1 mile north-east). Larger places within reach include Woking (12 miles south-west), Camberley (15 miles south-west), Epsom (12 miles south-east), Ewell (12 miles south-east), Egham (5 miles south-west) and Walton-on-Thames (6 miles south).
What’s near Heathrow
In Heathrow, that means homes near The Queen's Arms, Space Studio West London and Bedfont Primary School. There’s a railway station in Heathrow itself: Heathrow Terminals 2 & 3 Rail station. Other landmarks nearby include Spelthorne Museum (3.5 miles south-west) and Harlington (1.6 miles north). Green spaces nearby include Staines Reservoirs and Crane Meadows.
Looking after it afterwards
After the repair has cured, a few habits help it last:
- Have chips seen to early
- Avoid suction-cup mats
- A quick wipe after use keeps limescale away
- Keep toiletries on a shelf rather than in the bath
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
On a worn bath, rust spots keep spreading. It’s simpler to resurface before they spread.
DIY kit or professional repair?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Common questions in Heathrow
Is repairing better than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we will tell you.
Can you repair something that is been repaired before?
In most cases. We remove the old repair before doing a new one, so let us know about it.
Can you change the colour of my bath?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time that suits you.
How much does bath re-enamelling cost in Heathrow?
Resurfacing from £350. Every job gets a fixed price based on pictures of the damage. Send a close-up of the damage and a wider photo and your postcode.
Can you re-enamel a roll-top bath?
Yes. Inside and out.
How long does re-enamelling take?
Usually a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
What areas do you cover?
We work UK-wide, and that includes Heathrow. Our prices are the same everywhere.
Also near Heathrow
More services for Heathrow
About our accreditations · Every repair comes with a one-year guarantee.
