Greater London · England
Bath Re-enamelling in Bedfont
Local bath re-enamelling for Bedfont: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Enamel that’s lost its shine and feels rough
- Lots of chips and rust spots
When we’d advise against a repair
To be straight with you, some problems need a different fix:
- A poorly supported acrylic bath, until it’s firmed up
- Damage hidden under a previous coating, until it’s stripped back
- A metal bath with a through crack
If in doubt, send photos and we’ll say what we think.
Surfaces we repair
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
How we handle bath re-enamelling in Bedfont
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. We regularly repair basins & shower trays, pressed steel baths and Victorian roll-tops, and people most frequently call us about a coating lifting around the plughole and a coloured bath you want in white.
Every job is backed for twelve months in Bedfont and everywhere else. We return to put right any problem with the work.
- Where
- Bedfont (TW14, TW6, TW13)
- Area hub
- Greater London
- Warranty
- One year on every repair
- Quote
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What bath re-enamelling costs
Resurfacing from £350. There are no hourly rates or hidden extras. The price depends on:
- How hard the colour is to match
- Whether we combine several jobs
- What kind of damage it is
- The size and number of damaged areas
Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it, and doing several items at once reduces it.
Quotes from your pictures
Good photos mean an accurate price. Here’s what we find most useful:
- What it’s made of, if you know
- Where you are, by postcode
- One sharp close-up of the damage
- A coin or ruler next to the damage for scale
There is no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
More services for Bedfont
FAQs for Bedfont
How long does re-enamelling take?
One day for most baths and can be used the day after. We’ll confirm timings when we quote.
Do you charge for travel?
We do not add a call-out fee. Your fixed price includes everything.
How do I book?
Send pictures through the quote form or call 0345 017 0787, and we’ll take it from there.
Can I add another job to the visit?
Yes, and it’s frequently cheaper. Just add the extra items to your pictures and we’ll quote them together.
Can I get a quote without a visit?
In nearly every case. We only ask to see it in person if the photos cannot show what we need.
Do I need to be at home?
We need someone to let us in. After that, you can carry on with your day.
Do you cover Bedfont?
Yes, we do. Technicians travel to Bedfont from across the region, with no extra charge for travel.
Will there be fumes?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
Should you replace it?
Replacing the bath means a plumber, lifting out the old bath, making good the walls and tiles and days without a bathroom. Resurfacing renews the whole surface with the bath left where it is. Prices start from £350. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
What you get with us
- Technicians who travel to you, UK-wide
- Most jobs done in one visit
- CHAS, Constructionline and SafeContractor accredited
- Same prices wherever you are
Read our prices page or bath cost comparison.
Can I fix it myself?
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
Materials and what they mean for the repair
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Common problems we fix in Bedfont
Hard water speeds up the wear, and abrasive cleaners do the most damage.
Common reasons people in Bedfont contact us include:
- A peeling or bubbling previous coating
- An original cast iron bath that needs restoring
- A bath in a colour that no longer suits
- Brown or grey marks that don’t clean off
Comparing quotes
- How long it needs to cure
- What happens if the damage is worse than the photos show
- Aftercare advice
- What protection goes down before work starts
What we do, step by step
Arrival times are agreed in advance. Once we are there, the work takes a full day. The room is left tidy.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the following day.
Getting ready for the visit
- Let us know if it has been repaired before
- Keep a parking space free if you can
- Keep children and pets away from the room on the day
How to get a price
We price from pictures so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
Read more
For landlords and businesses
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Landlords, letting agents and housing providers in Bedfont use us as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Where we work around Bedfont
Bedfont is about 1 mile west of Feltham, in Greater London. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We work in 764 places in Greater London, from the larger towns to small villages. Our jobs stretch from Bedfont to London (about 15 miles away).
Every address in TW14, TW6 and TW13 is within our area, from the main roads to the quietest streets. You’ll find streets such as Elm Road, New Road and East Road, and we cover them all. Neighbouring places we cover include West Bedfont (1 mile west), Feltham (1 mile east), Heathrow (1 mile north-west), Hatton (1 mile north-east) and Hounslow (1 mile south). We also work in nearby towns such as London (15 miles east), City of Westminster (13 miles east), Marylebone (13 miles east), Kensington (11 miles east), St Pancras (15 miles east) and Hampstead (13 miles north-east).
Local landmarks in Bedfont
In Bedfont, that means homes near Fairholme Primary School, Space Studio West London and Church of St Mary, among other places. The closest station to Bedfont is Heathrow Terminal 4 Rail station, roughly 0.7 miles north-west of the centre. Nearby you’ll also find Kempton Steam Museum (2.3 miles south-east) and Treaty Centre (3.5 miles east). Green spaces nearby include Staines Reservoirs and Crane Meadows.
About our accreditations · Every repair comes with a one-year guarantee.
