Hampshire · England
Bath Re-enamelling in Heckfield Heath
Problem with your bath in Heckfield Heath? We repair it in place, match it on site and guarantee the work for a year.
- Resurfacing from £350
- A dull, rough surface that will not come clean
- Brown or grey marks that do not clean off
Repairs by material
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Bath re-enamelling in Heckfield Heath without replacing anything
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. We are often asked to fix lots of chips and rust spots and a dull, rough surface that won’t come clean, in Victorian roll-tops, cast iron baths and pressed steel baths.
All of our repairs are guaranteed for twelve months. We return to put right any problem with the work.
- Where
- Heckfield Heath (RG27, RG7)
- Area hub
- Hampshire
- Guarantee
- One year on every repair
- Price
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Heckfield Heath and the surrounding area
Heckfield Heath is about 4 miles north of Hook, in Hampshire. We agree a date that works for you, and you will know when to expect us, so you’re not left waiting in all day. We cover 683 places across Hampshire. Our nearest city page is London, about 39 miles away.
Our visits in RG27 and RG7 work the same way as everywhere else we cover. That includes homes on Church Lane and The Causeway. If you’re just outside Heckfield Heath, we cover Heckfield (1 mile south), Riseley (1 mile north), Bramshill (1 mile east), Hound Green (1 mile south) and Hazeley (2 miles south-east). Further out, we also cover Basingstoke (8 miles south-west), Farnborough (9 miles south-east), Fleet (7 miles south-east), Aldershot (11 miles south-east), Alton (14 miles south) and Yateley (5 miles east).
What’s near Heckfield Heath
In Heckfield Heath, that means homes near Wellington Country Park, New Inn and Church of St Michael and the streets around them. For rail, the closest station is Mortimer station, roughly 3.8 miles north-west. A little further out are Beaumys Castle (2.3 miles north-west) and West Green House Agricultural Museum (3.3 miles south). Open spaces near Heckfield Heath include The Marshes Local Nature Reserve.
Work for landlords and builders
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Do you need bath re-enamelling in Heckfield Heath?
A dull surface stains and holds dirt, and cleaning harder only makes it worse. That is the point where re-enamelling makes sense.
The things clients typically mention when they call include:
- A coloured bath you want in white
- Stains that will not shift
- Worn patches where water runs and sits
- A coating lifting around the plughole
What to look for in a quote
- Whether there are any call-out or travel charges
- How long it needs to cure
- What prep work is covered
- Whether the colour is mixed to match
How we price bath re-enamelling
Prices start from £350. Prices are worked out job by job, from your pictures. The main factors are:
- Whether it’s a chip, crack, burn or wear
- What the surface is made of
- How much damage there is
- How many items we do on one visit
A repair is priced on what needs doing, not your postcode. The full price is agreed before booking, with no extras added later.
Getting a price from pictures
Photographing the damage takes a minute. Try to send:
- The material, if you know it
- One picture of the entire bath
- A clear, close picture of the problem area
- A coin or ruler next to the damage for scale
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price the same day in most cases.
DIY repairs versus a professional job
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it does not work out, we can still repair it properly.
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Keeping it looking good
After the repair has cured, a few habits help it last:
- Keep suction mats out of the bath
- Repair dripping taps early
- Keep toiletries on a shelf rather than in the bath
- Don’t use the bath until it has fully cured
Rinse the bath and wipe it over after use, especially in hard water areas, so limescale can’t build up.
On a worn bath, rust spots keep spreading and make the job bigger. Resurfacing before they spread keeps it simpler.
The process
We agree an arrival time beforehand, so you know when to expect us. On site, it takes the best part of a day for most jobs. We leave the room clean and you will know when it can be used.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the day after.
Getting ready for the visit
- Tell us about any previous repairs or coatings
- Point us to the nearest place to park
- Have a window or extractor fan available
Getting a price
The quickest way to a price is to send two or three photos through our quote form or ring us. We will tell you honestly whether it can be repaired.
Read more
Honest limits
We would rather lose a job than do one that won’t last, so these are the limits:
- A bath that’s rusted through
- Leaks from fittings rather than the bath
- A poorly supported acrylic bath, until it’s firmed up
Not sure? Send photos and we’ll give you a straight answer before booking.
Materials we repair
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Cast iron baths
Nearby places to Heckfield Heath
Also in Heckfield Heath
Heckfield Heath questions
Is there a smell?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
When can you do it?
That depends on our diary for your area. Send pictures with your postcode and we’ll reply with the earliest dates.
Can I add another job to the visit?
Yes, and it’s frequently cheaper. Send pictures of everything together and we will quote them together.
Can you change the colour of my bath?
Yes, most people go for white. Mention the colour you want when you send pictures.
Can tenants book a repair?
We are happy to deal with the tenant, landlord or agent. Just make sure the landlord agrees.
How much does bath re-enamelling cost in Heckfield Heath?
Prices start from £350. The exact price depends on the damage, so we quote from pictures. You will get a fixed figure before booking.
Which areas do you work in?
We work UK-wide, and that includes Heckfield Heath. Prices don’t change with location.
Is it worth repairing rather than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we will tell you.
About our accreditations · Every repair comes with a one-year guarantee.
