Norfolk · England
Bath re-enamelling & resurfacing in Hemsby, Norfolk
Damaged bath in Hemsby? We repair it in place, match it on site and guarantee the work for a year.
- Resurfacing from £350
- A roll-top that’s seen better days
- Staining under the taps and around the waste
Can I fix it myself?
If you do try a kit, read the instructions carefully, and do not use it until it has fully cured. If it fails, we can still put it right.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Bath re-enamelling in Hemsby, done in place
We do not move the bath, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, and can be used again the following day. If you’re dealing with a roll-top that’s seen better days and staining under the taps and around the waste, we can normally put it right.
All our work is covered by a one-year guarantee.
- Location
- Hemsby (NR29)
- County
- Norfolk
- Cover
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Nearby places to Hemsby
Other services in Hemsby
Hemsby and nearby
Hemsby is about 6 miles north of Great Yarmouth, in Norfolk. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Hemsby is one of 797 places in Norfolk we cover.
We cover every part of NR29. That includes homes on The Street, Hall Close and Homestead Gardens. Nearby, we also work in Ormesby St Margaret (2 miles south), Ormesby St Michael (2 miles south-west), Rollesby (3 miles west), Filby (3 miles south-west) and Mautby (3 miles south). Further out, we also cover Great Yarmouth (6 miles south), Gorleston-on-Sea (9 miles south), Thorpe St Andrew (15 miles west), North Walsham (15 miles north-west), Southtown (7 miles south) and Caister-on-Sea (3 miles south).
Local landmarks in Hemsby
Our customers here include homes close to Church of St Mary the Virgin, Flegg High School and Hemsby Primary School. Further afield, we also cover the area around Blitz and Pieces (1.3 miles south-east) and Caister Castle (3.2 miles south). Open spaces near Hemsby include Winterton Dunes and Martham Broad.
How it works
Nothing needs to be moved out of the room beforehand. Everything we use comes in the van with us, lay protective sheets and get going once we’ve agreed what we are doing. Most jobs take the best part of a day, and you are welcome to carry on with your day while we work.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
How to prepare
- Keep children and pets away from the room on the day
- Clear toiletries, mats and anything else from around the area
- Make sure the area is dry
How to get a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
Advice
For landlords and businesses
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip.
Housing associations and facilities teams use us for planned and reactive repairs in Norfolk and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
What a repair cannot fix
We’d rather lose a job than do one that will not last, so these are the limits:
- Plumbing leaks, which need a plumber
- Holes rusted through the metal
- Problems we can’t see until an old finish comes off
If in doubt, send pictures and we will say what we think.
What we work on
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
What we are called out for in Hemsby
Enamel wears gradually. Abrasive cleaners, limescale and years of use wear the gloss away, starting where water runs and sits.
Typical reasons for a call-out include:
- A peeling or bubbling previous coating
- Staining under the taps and around the waste
- An outdated colour you’d like to change
- Enamel that is lost its shine and feels rough
Comparing quotes
- When it can be used again
- What aftercare is recommended
- Whether the price is fixed and includes VAT
- What the guarantee covers, and for how long
What your bath is made of matters
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot.
Common questions in Hemsby
What happens next?
We come back with a fixed quote, normally with dates to choose from. You are under no obligation.
Do you cover the entire of Norfolk?
All of Norfolk, and the rest of the UK. Travel is included in the price.
Are there extra charges for Hemsby?
There’s no separate call-out charge. Your fixed quote includes everything.
Will you leave a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Is a repair better than a new one?
Usually, if the item is otherwise sound. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.
Is there any odour?
Expect a mild smell while we’re working that clears as it cures.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
Do I have to be there?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Looking after it afterwards
How the surface is treated afterwards matters. Here’s what we suggest:
- Rinse off hair dye, oils and bath bombs immediately
- A quick wipe after use keeps limescale away
- Never use suction bath mats
- Don’t leave bottles, razors or sponges standing on the surface
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Fix dripping taps quickly.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Should you replace it?
If the bath is sound, re-enamelling is usually much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Our bath re-enamelling starts from £350. Set against the cost of replacement, repairing normally costs far less, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Why book with us
- CHAS, Constructionline and SafeContractor accredited
- No extra charge for your area
- Dust sheets down, tidy finish
- One-year guarantee on every repair
See our prices page or bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
