Norfolk · England
Bath re-enamelling & resurfacing in Ormesby St Michael, Norfolk
Local bath re-enamelling for Ormesby St Michael: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Worn patches where water runs and sits
- An original cast iron bath that needs restoring
Bath re-enamelling in Ormesby St Michael, done in place
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. If you’re dealing with a roll-top that’s seen better days and a peeling or bubbling previous coating, we can help, whatever the material.
All of our repairs are guaranteed for twelve months. If something goes wrong with the work, we come back.
- Where
- Ormesby St Michael (NR29)
- Region
- Norfolk
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
FAQs for Ormesby St Michael
How soon can you come?
That depends on our diary for your area. Send pictures with your postcode and we will reply with the earliest dates.
Is there any odour?
It depends on the job, but frequently a little. Ventilation keeps it to a minimum, and it soon fades.
Can you make a coloured bath white?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
Do I need to be at home?
Someone needs to let us in and show us the job. You do not need to watch us work.
Can a failed resurfacing be redone?
Generally, yes. We strip the failing coating and resurface it properly. Mention it when you send photos.
Is it safe with children and pets around?
Just keep them out of the work area. We’ll let you know when it’s safe to use again.
How long is the bath unusable?
One day for most baths and can be used the day after. We give you timings with the quote.
Can you repair something that’s been repaired before?
Generally, yes. Tell us what was done before and we will plan for it.
Covering Ormesby St Michael
Ormesby St Michael is about 6 miles north-west of Great Yarmouth, in Norfolk. Across the NR29 area, we come to you. Ormesby St Michael is one of 797 places in Norfolk where we work.
Our visits in NR29 work the same way as everywhere else we cover. Whether you live on Clere Drive, Main Road and Burgh Wood Road or a nearby road, a technician can come to you. We also cover the places around Ormesby St Michael: Filby (1 mile south), Rollesby (1 mile north-west), Ormesby St Margaret (1 mile east), Burgh St Margaret (2 miles west) and Mautby (2 miles south). Further out, we also cover Norwich (15 miles west), Great Yarmouth (6 miles south-east), Gorleston-on-Sea (8 miles south), Sprowston (14 miles west), Thorpe St Andrew (13 miles west) and North Walsham (15 miles north-west).
Near you in Ormesby St Michael
In Ormesby St Michael, that means homes near Church of St Michael and Rollesby Primary School and the streets around them. Other landmarks nearby include Caister Castle (2.7 miles south-east) and Fishermens Hospital Including Gate Piers And Railings (5.5 miles south-east). The countryside around Ormesby St Michael includes Filby Broad and Winterton Dunes.
Also near Ormesby St Michael
What else we do in Ormesby St Michael
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Do you need bath re-enamelling in Ormesby St Michael?
Enamel wears gradually. Years of cleaning, hard water and hot baths dull the surface, starting where water runs and sits.
People typically call us when they notice something like this:
- A peeling or bubbling previous coating
- A bath in a colour that no longer suits
- A bath that stays dull however much you clean it
- Wear marks under the taps
Comparing quotes
- How soon you can use it again
- What happens if the damage is worse than the pictures show
- Is the price fixed, and does it include VAT?
- How the colour is matched
Repairs by material
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
Looking after it afterwards
A little care keeps the finish looking good. Our advice:
- Repair dripping taps early
- A quick wipe after use keeps limescale away
- Get any chip repaired quickly
- Don’t leave bottles, razors or sponges standing on the surface
Stick to mild, non-abrasive cleaners, don’t use suction bath mats, and keep bottles and razors off the surface.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
What a repair can’t fix
It helps to know what we can’t do:
- Holes rusted through the metal
- A bath split right through the body
- Problems we cannot see until an old finish comes off
Send us pictures and we’ll tell you honestly.
Surfaces we repair
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
Landlords, agents and businesses in Ormesby St Michael
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
What we do, step by step
The work is clean and fairly quiet. Protection goes down first, then the job itself takes the best part of a day. At the end we talk you through the curing time and the aftercare.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Let the surface dry out before the visit
- Tell us about any previous repairs or coatings
- Clear toiletries, mats and anything else from around the area
Get a quote
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Related advice
How we price bath re-enamelling
Prices start from £350. We don’t charge extra for travel to Ormesby St Michael. The price depends on:
- What the surface is made of
- Unusual colours or finishes
- How many items we do on one visit
- How easy the damage is to reach
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.
Getting a price from photos
The better the photos, the more accurate the price. Here’s what we find most useful:
- Where you are, by postcode
- Whether it’s been repaired or coated before
- A photo taken from further back
- One sharp close-up of the damage
You don’t need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
About our accreditations · Every repair comes with a one-year guarantee.
