Norfolk · England
Bath re-enamelling & resurfacing in Rollesby, Norfolk
Fixed-price bath re-enamelling in Rollesby and the surrounding area, generally in one visit.
- Resurfacing from £350
- A dull, rough surface that will not come clean
- An original cast iron bath that needs restoring
What bath re-enamelling costs
Resurfacing from £350. A fixed quote means you know the cost before booking. We look at:
- How many items we do on one visit
- Access to the area
- What the surface is made of
- The type of damage
Set against the cost of replacement, a repair is normally a fraction of the price, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Getting a price from photos
Phone photos are fine. Ensure they show:
- What it’s made of, if you know
- One picture of the whole bath
- Where you are, by postcode
- A close-up of the damage, in focus
There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Bath re-enamelling in Rollesby, done in place
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, and we take our time over it. Common call-outs are for an outdated colour you’d like to change and several chips and rust patches, in Victorian roll-tops, pressed steel baths and acrylic baths.
Peace of mind is built in: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.
- Location
- Rollesby (NR29)
- County
- Norfolk
- Warranty
- A year, on every repair
- Quote
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
When to call us in Rollesby
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
It’s worth getting a quote if you see:
- A bath in a colour that no longer suits
- An original cast iron bath that needs restoring
- Worn patches where water runs and sits
- An old resurfacing that’s failing
What to look for in a quote
- How your room will be protected
- Who will actually do the work
- How to care for the finish
- The length of the guarantee and what it covers
What a repair cannot fix
A repair isn’t right for every job, for example:
- A cast iron or steel bath that’s cracked right through
- Acrylic that moves when you stand in it
- Anything hidden under an old coating, until we remove it
If in doubt, send photos and we’ll say what we think before you book.
Materials we repair
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Acrylic baths
Repairs by material
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
What happens on the day
Here’s how a visit generally runs: we arrive on time, protect everything around the work area, carry out the work and clear up. Plan for a full day. Before leaving, we tell you when it can be used and how to look after it.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s usually ready the next day.
Getting ready for the visit
- Have somewhere for us to park nearby if possible
- Mention any parking restrictions or tricky access
- Clear the area around the damage
Ask for a price
We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Advice
FAQs for Rollesby
How long does re-enamelling last?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
Is it OK to have pets in the house?
On the day, the room should be kept clear of pets and children.
How long is the bath unusable?
Typically one day, with the bath ready the following day. A badly pitted bath can need a second day.
Can a failed resurfacing be redone?
In most cases. The old coating comes off before we resurface it. Mention it when you send photos.
Can you quote from pictures?
Nearly always. If photos do not show enough, we will ask for another angle.
Do you work in Rollesby?
Yes. We cover the whole UK and come to Rollesby. Send us photos for a fixed quote, or call 0345 017 0787.
What if the damage is worse than the photos show?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
What happens once I’ve sent pictures?
We look at the pictures and reply with a fixed quote and some dates. If anything’s unclear, we’ll ask for another photo.
Can I fix it myself?
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Looking after it afterwards
After the repair has cured, a few habits help it last:
- Leave the bath for the full curing time before using it
- Keep toiletries on a shelf rather than in the bath
- Fix dripping taps quickly
- Keep suction mats out of the bath
Use mild, non-abrasive cleaners, don’t use suction bath mats, and don’t leave bottles or razors standing on the surface.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
Places near Rollesby
Other services in Rollesby
Repair or replace in Rollesby?
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing generally wins. Resurfacing from £350, with every job priced individually. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
What you get with us
- One visit for most repairs
- Same prices wherever you are
- We come to you, anywhere in the UK
- Every repair guaranteed for a year
Read our full price list and bath cost comparison.
Where we work around Rollesby
Rollesby is about 7 miles north-west of Great Yarmouth, in Norfolk. Our technicians come to homes and businesses in Rollesby, so you do not need to take anything anywhere. Our repair technicians cover 797 places in Norfolk, from the larger towns to small villages.
Jobs in NR29 are booked in the same way as anywhere else. You’ll find streets such as Main Road, King George Close and Meadow Way. Other places close to Rollesby include Ormesby St Michael (1 mile south-east), Burgh St Margaret (1 mile south-west), Filby (2 miles south-east), Thrigby (2 miles south) and Ormesby St Margaret (2 miles east). We also work in nearby towns such as Norwich (15 miles west), Great Yarmouth (7 miles south-east), Gorleston-on-Sea (9 miles south-east), Sprowston (13 miles west), Thorpe St Andrew (13 miles west) and North Walsham (14 miles north-west).
Landmarks near Rollesby
We visit homes around Church of St George, Flegg High School and Rollesby Primary School and the streets around them. A little further out are Martham Countryside Collection (1.5 miles north) and Caister Castle (3.8 miles south-east). Not far away are Winterton Dunes and Filby Broad.
About our accreditations · Every repair comes with a one-year guarantee.
