Swansea · Wales
Bath Re-enamelling in Hendy
Bath re-enamelling in and around Hendy: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- A coating lifting around the plughole
- A bath that stays dull however much you clean it
Where we work around Hendy
Hendy is about 3 miles north of Gorseinon, in Swansea. We travel to clients in Hendy and the surrounding area, so nothing has to leave your home. Hendy is one of 153 places in Swansea we cover.
Jobs in SA4 are booked in the same way as anywhere else. Jobs here include addresses on Maesderi, Heol y Parc and Heol Llwyn Bedw. Other places close to Hendy include Fforest (1 mile north-east), Talyclun (1 mile south-west), Pontarddulais (1 mile east), Waungron (1 mile south-east) and Sardis (1 mile north). We also work in nearby towns such as Swansea (7 miles south-east), Castle (8 miles south-east), Morriston (6 miles south-east), Mount Pleasant (8 miles south-east), Gorseinon (3 miles south) and Dyfaty (8 miles south-east).
What’s near Hendy
In Hendy, that means homes near St Michael's Church, Pontarddulais Comprehensive School and Ysgol Gynradd Gymraeg Bryniago. Hendy’s nearest station is Pontarddulais station, about 0.6 miles east. Well-known places in the area include Gorseinon Hospital (3 miles south) and Bwlch Farm Museum (3.4 miles south-west). Green spaces nearby include WWT Llanelli Wetland Centre and Pen Tyreglwys.
Bath re-enamelling in Hendy without replacing anything
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. Our repair technicians work on acrylic baths, basins & shower trays and cast iron baths, and common reasons people contact us are stains that won’t shift and an old resurfacing that’s failing.
A one-year guarantee comes as standard, so you’re not left on your own once we’ve gone.
- Location
- Hendy (SA4)
- Region
- Swansea
- Cover
- One year on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What a repair can’t fix
It helps to know what we can’t do too:
- Plumbing leaks, which need a plumber
- A cast iron or steel bath that’s cracked right through
- Anything hidden under an old coating, until we remove it
If in doubt, send pictures and we will say what we think before you book.
Materials we repair
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
Should you replace it?
Replacement only makes sense in a few cases: if the bath is cracked through, if you want a different size or shape, or if you’re refitting the entire room anyway. In most other cases, resurfacing is the better choice. Resurfacing from £350, with every job priced individually. Our prices are the same across the UK, with no extra for Hendy. The job itself decides the price: how much damage, what it’s made of and how many items.
Why book with us
- Nothing taken out or refitted
- Straight answers about what a repair can do
- Free fixed quotes from pictures
- Colours mixed by hand to suit your surface
Take a look at our prices page or bath cost comparison.
What we do, step by step
We turn up when we said we would and checks the damage against your photos first. Dust sheets and masking tape go down before we open a single tin. The work itself takes a full day, and we leave the room as we found it.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Ensure the room can be ventilated
- Let the surface dry out before the visit
- Have somewhere for us to park nearby if possible
Getting a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them over. You will get a fixed price, not an estimate.
Advice
Hendy questions
What information do you need?
Use the quote form or ring 0345 017 0787, and we’ll do the rest.
Do you need to take the bath out?
No. We resurface it in place, so the tiles and taps stay put.
Do you cover the whole of Swansea?
We work UK-wide. Our prices are the same everywhere.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Can you redo someone else’s repair?
Typically, yes. The old repair comes out first.
Is it messy?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Is there any odour?
There may be a mild smell during the work.
Do you work in Hendy?
We do. Repair technicians travel to Hendy from across the region, with no extra charge for travel.
Common problems we fix in Hendy
Often the bath has just had decades of use. Underneath, a cast iron or steel bath is usually as strong as ever.
The most common problems we are called about are:
- A bath in a colour that no longer suits
- A period or roll-top bath worth keeping
- Staining under the taps and around the waste
- Chips and rust in more than one place
What to look for in a quote
- How the room is protected while they work
- What preparation is included
- Whether the price covers travel
- What happens if the damage is worse than the photos show
Different materials, different repairs
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel often rusts by the plughole, so we check it carefully.
For landlords and businesses
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which matters when someone is living in the home.
Letting agents often send us pictures straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Looking after it afterwards
Looking after the surface is easy:
- Wash away dyes and oils after use
- Respect the curing time we give you
- A dripping tap should be fixed promptly
- Use washing-up liquid and a soft cloth
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Repair dripping taps promptly.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
Other services in Hendy
About our accreditations · Every repair comes with a one-year guarantee.
