Warwickshire · England
Bath Re-enamelling in Henley-in-Arden
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Henley-in-Arden. Send photos for a free, fixed quote.
- Resurfacing from £350
- Brown or grey marks that do not clean off
- A period or roll-top bath worth keeping
Bath re-enamelling at your home in Henley-in-Arden
The bath stays where it is, so the taps, tiles and plumbing are not touched. It generally takes one visit, and can be used again the day after. We regularly repair pressed steel baths, basins & shower trays and cast iron baths, and common reasons people contact us are a bath that stays dull however much you clean it and a peeling or bubbling previous coating.
A one-year guarantee comes as standard, so you are not left on your own once we’ve gone.
- Area
- Henley-in-Arden (B95)
- Region
- Warwickshire
- Cover
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
What we are called out for in Henley-in-Arden
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
Customers normally contact us about:
- A roll-top that is seen better days
- A dull, rough surface that will not come clean
- Thin, worn enamel in places
- Stains that will not shift
What your quote should include
- Whether the price covers travel
- Whether cleaning and preparation are in the price
- Whether they match the colour on site
- What protection goes down before work starts
Places near Henley-in-Arden
Also in Henley-in-Arden
About Henley-in-Arden
Henley-in-Arden is about 7 miles east of Redditch, in Warwickshire. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We work in 324 places across Warwickshire. We work right across the region, from Henley-in-Arden to Birmingham (about 13 miles away).
Postcode districts we cover here: B95. Jobs here include addresses on High Street, Station Road and Market Close. Main roads around Henley-in-Arden include the A3400 and A4189, so getting to you is simple. We also cover the places around Henley-in-Arden: Kite Green (1 mile east), Preston Green (1 mile east), Wootton Wawen (2 miles south), Barnmoor Green (2 miles east) and Kington (2 miles south-east). Larger places within reach include Warwick (9 miles east), Royal Leamington Spa (11 miles east), Stratford-upon-Avon (7 miles south-east), Leamington Spa (10 miles east), Kenilworth (10 miles north-east) and Fordbridge (13 miles north).
Landmarks near Henley-in-Arden
We visit homes around St Mary's Catholic Primary School, Church of St John The Baptist Including Wall To Guildhall and Nags Head Public House (South Part). Also close by are Henley-in-Arden School (under half a mile south) and Henley-in-Arden School (less than half a mile south). There is a railway station in Henley-in-Arden itself: Henley-In-Arden station. Nearby you will also find Alexandra Hospital (5.6 miles west) and Morton Bagot Castle (2.5 miles west). Not far away are Henley Sidings.
Should you replace it?
If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Nothing else is disturbed. Prices start from £350. Rather than charging by the hour, we price the whole job up front. Damage, material and access decide it, and combining items on one visit brings it down.
Why book with us
- Honest advice, even when it means no job
- One visit for most repairs
- We come to you, anywhere in the UK
- Fixed prices from your photos
Read our pricing or resurfacing vs replacement cost guide.
What happens on the day
Arrival times are agreed in advance. Once we’re there, the work takes the best part of a day. We leave the room clean and ready to use once it has cured.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Before we arrive
- Tell us if there are stairs or a lift
- Keep a parking space free if you can
- Open a window if you can
Ask for a price
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Advice
Repairs by material
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Henley-in-Arden questions
Do you cover Henley-in-Arden?
Yes, we do. We send a technician to Henley-in-Arden for every job, and the price is the same as everywhere else.
What happens next?
You’ll get a fixed quote back, typically with dates to choose from. There’s no obligation to book.
Are you a vetted contractor?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can you do the outside of a roll-top?
Yes, frequently. We resurface the inside, and the outside can be refinished too.
Will there be a smell?
There may be a mild smell during the work, which fades afterwards.
Is it safe with children and pets around?
Yes, as long as they stay out of the room we are working in. We will let you know when it’s safe to use again.
Is there a guarantee?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
How soon can you come?
That depends on our diary for your area. We will offer you dates when we send your quote.
Can I fix it myself?
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Aftercare tips
How the surface is treated afterwards matters. Here’s what we suggest:
- Keep suction mats out of the bath
- Leave the bath for the full curing time before using it
- Clean with a soft cloth and mild detergent
- Dry the bath after use to stop limescale
Rinse the bath and wipe it over after use, especially in hard water areas, so limescale cannot build up.
Don’t try to scrub a worn bath back to shine. It just wears the enamel further.
For landlords and businesses
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
We’re used to working with agents and managing companies. Just send pictures, the address and how to get access and we will handle the rest.
When a repair is not the answer
Not everything can be repaired, and we’ll tell you before we start. Repairs won’t solve:
- Anything hidden under an old coating, until we remove it
- A cast iron or steel bath that is cracked right through
- Leaks from fittings rather than the bath
Not sure? Send photos and we will give you a straight answer before you book.
What we work on
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
About our accreditations · Every repair comes with a one-year guarantee.
