Kirklees · England
Bath re-enamelling & resurfacing in Hepworth, Kirklees
Bath re-enamelling for Hepworth, without a refit. Get a fixed quote from your photos, then we come to you.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- Wear marks under the taps
Aftercare tips
To keep it looking its best for years:
- Rinse off hair dye, oils and bath bombs immediately
- Use washing-up liquid and a soft cloth
- Don’t leave bottles, razors or sponges standing on the surface
- Dry the bath after use to stop limescale
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
About our bath re-enamelling in Hepworth
Re-enamelling is a one-day job for most baths. Nothing is disconnected or removed. Whether it’s a roll-top that’s seen better days and a coating lifting around the plughole, we can typically put it right, on acrylic baths, Victorian roll-tops and pressed steel baths alike.
A one-year guarantee comes as standard.
- Where
- Hepworth (HD9)
- Area hub
- Kirklees
- Guarantee
- One year on every repair
- Price
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What happens on the day
The work is clean and fairly quiet. We protect the area first, then the work takes a full day. At the end we talk you through how soon it can be used and how to care for it.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can typically be used the day after.
How to prepare
- Move bottles, mats and clutter away from the area
- Tell us if there are stairs or a lift
- Point us to the nearest place to park
Get a quote
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed quote.
Read more
What bath re-enamelling costs
Prices start from £350. We give every job a fixed quote from pictures. These are the things that affect it:
- Doing more than one item at once
- How many areas need work
- The material
- Whether it’s a chip, crack, burn or wear
What it costs depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed quote from your photos, so there are no surprises on the day.
Quotes from your pictures
You can take the photos on your phone. Just ensure we can see:
- A wider photo showing the entire bath
- Whether it’s been repaired or coated before
- A coin beside the damage so we can judge size
- The material, if you know it
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them over. You’ll get a fixed quote, not an estimate.
For landlords and businesses
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we’ll handle the rest.
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
Questions from Hepworth
Do you need to take the bath out?
No. We resurface it in place, so nothing else is disturbed.
How long does re-enamelling last?
Look after it and it lasts. Avoid abrasive cleaners and suction mats.
Is there a guarantee?
Every repair comes with our one-year guarantee. We’ll explain what it covers when we quote.
How long does re-enamelling take?
Normally one day, with the bath ready the following day. A badly pitted bath can need a second day.
Is it worth repairing rather than replacing?
Typically, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.
Will there be a smell?
Some materials have a smell while they’re applied, so we ventilate the room. It clears as the materials cure.
When can you do it?
Your quote comes with available dates. Tell us if you need it done quickly.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
What we cannot put right
We will not take on work that won’t last, so here’s what a repair cannot put right:
- A cast iron or steel bath that’s cracked right through
- Damage hidden under a previous coating, until it’s stripped back
- A bath that is rusted through
Send us photos and we will tell you honestly.
Materials we repair
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
Towns and villages near Hepworth
Also in Hepworth
Signs you need bath re-enamelling in Hepworth
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
If you can see any of these, send us a photo:
- A bath in a colour that no longer suits
- Stains that won’t shift
- Several chips and rust patches
- A bath that stays dull however much you clean it
Questions to ask before you book
- Aftercare advice
- Whether a trained technician does the job
- Whether the price covers travel
- How long the guarantee is and what it covers
Different materials, different repairs
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Covering Hepworth
Hepworth is about 6 miles south of Huddersfield, in Kirklees. We visit clients in Hepworth and the surrounding area, so you don’t need to take anything anywhere. We work in all 189 towns and villages in Kirklees. Our jobs stretch from Hepworth to Leeds (19 miles away).
Our technicians cover all of the HD9 postcode area and the streets around it. We regularly work on streets such as Town Gate, Barracks Fold and Mount View Road. We also travel to Jackson Bridge (1 mile north), Scholes (1 mile north-west), Barnside (1 mile south-east), Hole Bottom (1 mile north) and Totties (1 mile north-west). Within a short drive, we also cover Huddersfield (6 miles north), Dewsbury (10 miles north-east), Batley (12 miles north), Mirfield (9 miles north), Liversedge (11 miles north) and Cleckheaton (12 miles north).
Near you in Hepworth
Our customers here include homes close to Butchers Arms, Hepworth Junior and Infant School and Holmfirth High School and the streets around them. The closest station to Hepworth is Brockholes station, roughly 2.8 miles north of the centre. Other landmarks nearby include Last Of The Summer Wine Exhibition (1.7 miles north-west) and Storthes Hall Hospital (3.9 miles north). The countryside around Hepworth includes Castle Hill.
About our accreditations · Every repair comes with a one-year guarantee.
