Kirklees · England
Bath re-enamelling & resurfacing in Victoria, Kirklees
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Victoria. Send pictures for a free, fixed quote.
- Resurfacing from £350
- Brown or grey marks that do not clean off
- Thin, worn enamel in places
Should you replace it?
A refit takes several trades and several days. Re-enamelling takes one technician and typically one day, with the bath ready the day after. Prices start from £350. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Why Victoria clients choose us
- One-year guarantee on every repair
- No need to remove anything
- No extra charge for your area
- We’ll tell you if it’s not worth repairing
See our prices page and bath cost comparison.
How we handle bath re-enamelling in Victoria
Re-enamelling is a one-day job for most baths. Nothing is disconnected or removed. If you’re dealing with a coating lifting around the plughole and worn patches where water runs and sits, we can help, on acrylic baths, basins & shower trays and cast iron baths alike.
Peace of mind is built in: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.
- Location
- Victoria (HD9)
- Region
- Kirklees
- Warranty
- One year on every repair
- Quote
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Nearby places to Victoria
What else we do in Victoria
Common problems we fix in Victoria
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
Look out for these signs:
- An outdated colour you’d like to change
- Brown or grey marks that do not clean off
- Lots of chips and rust spots
- Thin, worn enamel in places
What to look for in a quote
- Whether they match the colour on site
- Whether the price is fixed and includes VAT
- When it can be used again
- How your room will be protected
DIY repairs versus a professional job
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Honest limits
We won’t take on work that won’t last, so here’s what a repair cannot put right:
- Holes rusted through the metal
- Leaking taps or wastes (a plumber’s job)
- An acrylic bath that flexes badly underfoot
If in doubt, send photos and we will say what we think before you book.
Materials we work on in Victoria
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
What we do, step by step
Arrival times are agreed in advance, so you’re not left guessing. On site, it takes the best part of a day for most jobs. The room is left tidy and ready to use once it has cured.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Mention if the room is upstairs or in a flat
- Point us to the nearest place to park
- Let the surface dry out before the visit
How to get a price
To get a price, send two or three pictures through our quote form or ring us. We’ll say right away whether it can be repaired.
Advice
Victoria questions
Will there be a smell?
A little, depending on the job. Open windows and an extractor fan help, and it soon fades.
Can you quote from photos?
In nearly every case. If photos don’t show enough, we’ll ask for another angle.
Do you charge for travel?
We don’t add a call-out fee. Your fixed price includes everything.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Is repairing better than replacing?
Generally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.
Is it safe with children and pets around?
We ask you to keep children and pets out of the room while we work and until it has cured. Everywhere else in the home is fine.
Do you need to take the bath out?
No, it stays where it is. Everything is done in your bathroom, with the room protected and ventilated.
Can you redo someone else’s repair?
Yes, we often do. It can add a little time, which we include in the quote.
Where we work around Victoria
Victoria is about 7 miles south of Huddersfield, in Kirklees. We travel to homes and businesses in Victoria and the surrounding area, so nothing has to leave your home. Victoria is one of 189 towns and villages in Kirklees we cover. We work right across the region, from Victoria to Leeds (about 20 miles away).
We cover every part of HD9. We regularly work on streets such as Sheffield Road and Wood Royd Hill Lane. Close by, we cover Barnside (1 mile north-west), Crow Edge (1 mile south-east), Hepworth (1 mile north-west), Carlecotes (1 mile south) and Jackson Bridge (1 mile north-west). Further out, we also cover Huddersfield (7 miles north), Dewsbury (11 miles north-east), Batley (12 miles north), Mirfield (10 miles north), Liversedge (11 miles north) and Cleckheaton (12 miles north).
Around Victoria
We visit homes around Hepworth Junior and Infant School. The nearest railway station is Shepley station, about 3.2 miles north of the centre. A little further out are Storthes Hall Hospital (4.5 miles north) and Last Of The Summer Wine Exhibition (2.8 miles north-west).
Aftercare tips
Nothing complicated is needed:
- Do not leave bottles, razors or sponges standing on the surface
- Wipe the bath dry after use in hard water areas
- Do not let dyes or oils sit on the finish
- Clean with a soft cloth and mild detergent
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
Different materials, different repairs
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
What bath re-enamelling costs
Resurfacing from £350. We price every job individually, from your photos. What matters most is:
- Previous DIY repairs that have to come out
- How many areas need work
- Whether we combine several jobs
- Unusual colours or finishes
Compared with replacing, a repair is typically a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.
Quotes from your pictures
Two or three clear photos are usually enough. Try to include:
- The postcode, so we can plan the visit
- Good light, ideally daylight, without flash glare
- The material, if you know it
- A coin or ruler next to the damage for scale
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them over. You’ll get a fixed quote, not an estimate.
About our accreditations · Every repair comes with a one-year guarantee.
