Greater London · England
Bath Re-enamelling for Herne Hill homes
Bath re-enamelling in Herne Hill without the cost of replacing. Send us pictures for a fixed price, then book a visit.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- An old resurfacing that’s failing
Common problems we fix in Herne Hill
A dull surface stains and holds dirt, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
Clients generally contact us about:
- Brown or grey marks that do not clean off
- Lots of chips and rust spots
- A bath that stays dull however much you clean it
- A bath in a colour that no longer suits
Before booking anyone
- How long it needs to cure
- What happens if they find more damage
- What prep work is covered
- Aftercare advice
About our bath re-enamelling in Herne Hill
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. We work on cast iron baths, Victorian roll-tops and basins & shower trays, and common reasons people contact us are an old resurfacing that’s failing and enamel that’s lost its shine and feels rough.
Every job is backed for twelve months in Herne Hill and everywhere else. We return to put right any problem with the work.
- Where
- Herne Hill (SE22, SW2, SE24)
- Area hub
- Greater London
- Cover
- A year, on every repair
- Price
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
How it works
There’s not much you need to do on the day. Let us in and show us the room, and we’ll get on with it. The job generally runs to the best part of a day, including clearing up.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the day after.
Before we arrive
- Mention any earlier repairs or resurfacing
- Mention if the room is upstairs or in a flat
- Avoid using the area for a few hours before we arrive
Get a quote
There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.
Related advice
What affects the price in Herne Hill
Prices start from £350. Prices are worked out job by job. The main factors are:
- How easy the damage is to reach
- Any earlier repairs that need removing first
- Whether it’s a chip, crack, burn or wear
- How many items we do on one visit
Compared with replacing, a repair is normally a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Send pictures for a quote
We price nearly every job from pictures. This is what to send:
- Details of any past repairs
- Good light, ideally daylight, without flash glare
- A coin or ruler next to the damage for scale
- One picture of the entire bath
Most clients in Herne Hill get their price from pictures. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
How to look after the repair
So the finish stays in good condition for years:
- Don’t use the bath until it has fully cured
- Stick to gentle, non-abrasive cleaners
- Have chips seen to early
- Never use suction bath mats
Dry the bath after use if possible, particularly with hard water, and rinse away any product left on the surface.
Do not try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
Your questions about bath re-enamelling in Herne Hill
Is there any odour?
A little, depending on the job. Ventilation keeps it to a minimum.
How durable is a resurfaced bath?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
Someone resurfaced my bath and it’s peeling. Can you help?
Usually, yes. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
How quickly can you book me in?
We’ll give you dates with your quote. Tell us if you need it done quickly.
How much does bath re-enamelling cost in Herne Hill?
Prices start from £350. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
Do you charge for travel?
Travel is included in the price, with the same prices everywhere we work.
Will the price change on the day?
We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.
Which areas do you work in?
All of Greater London, and the rest of the UK. Travel is included in the price.
Materials and what they mean for the repair
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Towns and villages near Herne Hill
What else we do in Herne Hill
Repair or replace in Herne Hill?
Replacing a bath typically involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and typically one day, and the bath can be used the day after. Resurfacing from £350, with every job priced individually. What it costs depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. We give a fixed quote from your pictures, so you know the cost before you book.
Why choose Surface Doctor in Herne Hill
- Generally one visit, start to finish
- Fixed prices from your photos
- Colours mixed by hand to suit your surface
- Work done at your home or business
Take a look at our pricing and bath cost comparison.
Landlord and trade work in Herne Hill
Landlords, letting agents and housing providers in Herne Hill use us as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
We’re used to working with agents and managing companies. Just send pictures, the address and how to get access.
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
Covering Herne Hill
Herne Hill is about 3 miles south of London, in Greater London. Our repair technicians come to homes and businesses in Herne Hill and the surrounding area, so nothing has to leave your home. Our repair technicians cover all 764 towns and villages in Greater London.
We work across the SE22, SW2 and SE24 postcode area and the streets around it. Streets in the area include Jelf Road, Dewey Lane and Talma Road, and we cover them all. Herne Hill is on the A204 and A2214, so it’s easy for us to reach. Other places close to Herne Hill include Dulwich Village (1 mile south-east), East Dulwich (1 mile north-east), Dulwich (1 mile south-east), Denmark Hill (1 mile north) and Camberwell (1 mile north). Further out, we also cover London (3 miles north), City of Westminster (5 miles north-west), Marylebone (5 miles north-west), Kensington (6 miles north-west), St Pancras (5 miles north) and Shoreditch (5 miles north).
Near you in Herne Hill
Around Herne Hill, we work in homes near The Charter School, Belair Park and The Charter School. Also close by are Saint Faith's (within half a mile north-east), Half Moon pub (within half a mile west) and Judith Kerr Primary School (within half a mile south). There’s a railway station in Herne Hill itself: North Dulwich station. A little further out are Streatham Hill (1.6 miles south-west) and Dulwich Community Hospital (0.6 miles north-east). For a walk, there is Battersea Park Lake and Knight's Hill.
About our accreditations · Every repair comes with a one-year guarantee.
