Kent · England

Bath Re-enamelling for Herne Pound homes

Bath re-enamelling across Herne Pound and nearby, normally in one visit and guaranteed for a year.

  • Resurfacing from £350
  • Wear marks under the taps
  • Several chips and rust patches
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling for Herne Pound homes

How we handle bath re-enamelling in Herne Pound

We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, so we do not cut corners on it. Whether it’s a roll-top that’s seen better days and several chips and rust patches, we can generally put it right, whatever the material.

You are covered for a year from the day of the repair. If anything isn’t right, ring us and we’ll come back.

Where
Herne Pound (ME18)
Area hub
Kent
Cover
12 months on all our work
Quote
From £350. Free and fixed, from your photos
Call
0345 017 0787
Updated
23 October 2026
Surface Doctor technician refinishing the outside of a roll-top bath

How it works

We agree an arrival time beforehand, so you’re not left guessing. On site, it takes most of the day for most jobs. The room is left tidy and you will know when it can be used.

  1. We sheet, mask and ventilate the room.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. We repair chips, rust spots and pitting.
  4. We key the bath and apply a bonding primer.
  5. The new finish is sprayed on in several coats and left to cure.

Getting ready for the visit

  • Tell us about any previous repairs or coatings
  • Plan for the room to be out of bounds to pets and children
  • Keep a parking space free if you can

Getting a price

Pricing is simple: take a close-up of the damage and a photo from further back, send them over with your postcode, and we will reply with a fixed quote. There’s no charge for the quote and you are under no obligation.

Get a free quote

Read more

Why repair rather than replace?

A replacement often means several trades over several days. Re-enamelling is one technician, typically one day, and the bath is usable the day after. Our bath re-enamelling starts from £350. Set against the cost of replacement, a repair is normally a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.

Why us?

  • A year’s guarantee on all work
  • Colour mixed on the day to match
  • Generally one visit, start to finish
  • We come to you, anywhere in the UK

Read our pricing or guide to resurfacing and replacement costs.

Common problems we fix in Herne Pound

In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.

Look out for these signs:

  • Wear marks under the taps
  • Stains that will not shift
  • Several chips and rust patches
  • An old resurfacing that’s failing

Comparing quotes

  • The length of the guarantee and what it covers
  • What happens if the damage is worse than the photos show
  • How soon you can use it again
  • Whether there are any call-out or travel charges

Our hiring checklist

FAQs for Herne Pound

Will there be fumes?

A little, during the work. Ventilation keeps it down, and it fades as the finish cures.

How durable is a resurfaced bath?

A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.

What if the damage is worse than the pictures show?

The price is fixed for what the photos show. If there’s more, we will tell you before starting.

Can pets and children be at home?

On the day, the room should be kept clear of pets and children, so the repair is not disturbed while it cures.

Someone resurfaced my bath and it’s peeling. Can you help?

In most cases. The old coating comes off before we resurface it. Mention it when you send photos.

Do I have to be there?

Yes. We need access to the room while we work, at a time we agree with you.

Can tenants book a repair?

Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged.

Can I add another job to the visit?

Yes, and it’s often cheaper. Just add the extra items to your photos and you’ll get one combined price.

Different materials, different repairs

Acrylic

We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.

Pressed steel

Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.

DIY kit or professional repair?

A DIY attempt is not a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.

We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.

How to care for the repair

Once the work has cured, treat it gently:

  • Wipe the bath dry after use in hard water areas
  • Use washing-up liquid and a soft cloth
  • Never use suction bath mats
  • Wash away dyes and oils after use

Stick to mild, non-abrasive cleaners, don’t use suction bath mats, and don’t leave bottles or razors standing on the surface.

Do not try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.

Landlords, agents and businesses in Herne Pound

Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.

Landlords, letting agents and housing providers in Herne Pound use us as well as householders. Repairing between tenancies keeps void periods short, and it generally costs far less than a refit.

When we would advise against a repair

A repair is not right for every job, for example:

  • Acrylic that moves when you stand in it
  • A metal bath with a through crack
  • Holes rusted through the metal

If in doubt, send pictures and we will say what we think.

Materials we repair

  • Pressed steel baths
  • Acrylic baths
  • Basins & shower trays
  • Victorian roll-tops
  • Cast iron baths

Herne Pound and the surrounding area

Herne Pound is about 6 miles north-east of Tonbridge, in Kent. Anywhere in ME18, a technician comes to you. Herne Pound is one of 922 places in Kent where we work. Our nearest city page is London, about 26 miles away.

Every address in ME18 is within our area, from the main roads to the quietest streets. We regularly work on streets such as Butcher's Lane and Beech Road. Close by, we cover Kent Street (1 mile north-east), Mereworth (1 mile south), New Pound (1 mile west), Swanton (1 mile south-west) and Pizien Well (1 mile south-east). Within a short drive, we also cover Maidstone (6 miles east), Dartford (14 miles north-west), Sevenoaks (8 miles west), Royal Tunbridge Wells (10 miles south-west), Gravesend (11 miles north) and Tonbridge (6 miles south-west).

Local landmarks in Herne Pound

In Herne Pound, that means homes near Mereworth Community Primary School, The Queens Head Public House and St Lawrence's Church and the streets around them. Herne Pound’s nearest station is Wateringbury station, about 2.2 miles south-east of the centre. A little further out are Beechin Wood Archery Museum (2.4 miles north-west) and Leybourne Castle (3.3 miles north-east).

Map of Herne Pound © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.