Norfolk · England
Bath Re-enamelling in Hevingham
Full bath re-enamelling and resurfacing in Hevingham, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- An old resurfacing that’s failing
- Worn patches where water runs and sits
Our work in Hevingham
Hevingham is about 7 miles north of Norwich, in Norfolk. We travel to homes and businesses in Hevingham and the surrounding area, so you do not need to take anything anywhere. Hevingham is one of 797 towns and villages in Norfolk we cover.
Jobs in NR10 work the same way as everywhere else we cover. From The Street, Leonard Medler Way and Pound Road or a nearby road, a technician can come to you. Close by, we cover The Heath (1 mile west), Stratton Strawless (1 mile east), Waterloo (2 miles south-east), Marsham (2 miles north) and New Hainford (2 miles south-east). Within a short drive, we also cover Norwich (7 miles south), Dereham (14 miles west), Wymondham (13 miles south-west), Sprowston (7 miles south-east), Thorpe St Andrew (8 miles south-east) and North Walsham (8 miles north-east).
Around Hevingham
Our clients here include homes close to Parish Church of St Mary the Virgin and St Botolph and Hevingham Primary School. Well-known places in the area include Burgh next Aylsham (3.2 miles north) and New Farm Aviation Heritage Museum (3.6 miles south-east).
Bath re-enamelling in Hevingham without replacing anything
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It’s the answer when the whole bath is tired rather than one spot. Our repair technicians work on basins & shower trays, acrylic baths and cast iron baths, and common reasons people contact us are lots of chips and rust spots and a bath in a colour that no longer suits.
You are covered for a year from the day of the repair. Just call us if there is a problem and we’ll sort it.
- Location
- Hevingham (NR10)
- Area hub
- Norfolk
- Guarantee
- A year, on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What happens on the day
Arrival times are agreed in advance, so you’re not left guessing. On site, it takes a full day. The room is left tidy.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
Preparing for the visit
- Make sure the area is dry
- Have a window or extractor fan available
- Mention if the room is upstairs or in a flat
Getting a price
The quickest way to a price is to send two or three photos through our quote form or ring us. We’ll tell you honestly if a repair is the right fix.
Related advice
DIY repairs versus a professional job
A DIY attempt is not a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
What a repair can’t fix
In fairness, there are a few things a repair won’t fix:
- A bath that is rusted through
- Plumbing leaks, which need a plumber
- An acrylic bath that flexes badly underfoot
Send us pictures and we’ll tell you honestly.
Materials we repair
- Acrylic baths
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
Repair or replace: which is better?
Getting a cast iron bath out is hard work: they’re heavy, frequently need breaking up, and a new one is not cheap. Resurfacing in place avoids that entirely. Our bath re-enamelling starts from £350. We don’t add extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why book with us
- CHAS, Constructionline and SafeContractor accredited
- Generally one visit, start to finish
- Same prices wherever you are
- A fixed quote before booking
Take a look at our prices page and bath cost comparison.
Also near Hevingham
Other services in Hevingham
What affects the price in Hevingham
Resurfacing from £350. You will know the full cost before you book. We look at:
- What the surface is made of
- Where the damage is and how we get to it
- How many items we do on one visit
- The size and number of damaged areas
Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
Getting a price from photos
You can typically get a fixed quote without us visiting. To help us price it:
- A coin beside the damage so we can judge size
- Any earlier repairs or coatings
- What it’s made of, if you know
- One sharp close-up of the damage
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
What we’re called out for in Hevingham
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
Keep an eye out for these signs:
- Brown or grey marks that do not clean off
- A coloured bath you want in white
- A peeling or bubbling previous coating
- An original cast iron bath that needs restoring
Before you book anyone
- How changes to the job are handled
- Is the price fixed, and does it include VAT?
- What preparation is included
- When it can be used again
Common questions in Hevingham
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
When can you do it?
Your quote comes with available dates. Tell us if you need it done quickly.
Will there be a smell?
There can be some smell while we work. It fades as everything cures.
How long does re-enamelling take?
Typically a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
Is it messy?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes. Removing the old finish takes extra time, which we include in the price.
Can you do more than one item on the same visit?
Yes, and it’s frequently cheaper. Just add the extra items to your pictures and we’ll quote them together.
Is the work guaranteed?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
Materials and what they mean for the repair
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Keeping it looking good
Much of the damage we repair could have been avoided. A few tips:
- Get any chip repaired quickly
- A dripping tap should be fixed promptly
- Never use suction bath mats
- Don’t let dyes or oils sit on the finish
Use mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.
About our accreditations · Every repair comes with a one-year guarantee.
