East Riding of Yorkshire · England
Bath re-enamelling & resurfacing in High Eggborough, East Riding of Yorkshire
Full bath re-enamelling and resurfacing at your home in High Eggborough, with a one-year guarantee on every repair.
- Resurfacing from £350
- Thin, worn enamel in places
- An original cast iron bath that needs restoring
How we handle bath re-enamelling in High Eggborough
The bath stays where it is, so the taps, tiles and plumbing aren’t touched. It generally takes one visit, and can be used again the following day. Whether it’s a coating lifting around the plughole and a roll-top that’s seen better days, we can normally put it right, on pressed steel baths, cast iron baths and basins & shower trays alike.
Your repair is guaranteed for a year, as with every job we do.
- Area
- High Eggborough (DN14)
- County
- East Riding of Yorkshire
- Warranty
- One year on every repair
- Quote
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Common questions in High Eggborough
I’m a tenant. Can you help?
Of course. Check with your landlord; we can send the quote to them too.
Do you come to High Eggborough?
Yes, we do. We send a technician to High Eggborough for every job, with no extra charge for travel.
Can you make a coloured bath white?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
What happens next?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
Do I need to be at home?
We need someone to let us in. After that, you can carry on with your day.
Which areas do you work in?
All of East Riding of Yorkshire, and the rest of the UK. Travel is included in the price.
Can I get a quote without a visit?
Normally, yes. A close-up and a wider photo are enough to give a fixed quote.
Can you do the outside of a roll-top?
Yes, often. We resurface the inside, and the outside can be refinished too.
How the visit works
The work is clean and fairly quiet. Protection goes down first, then the job itself takes most of the day. At the end we talk you through the curing time and the aftercare.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Plan for the room to be out of bounds to pets and children
- Tell us about any previous repairs or coatings
- Tell us if there are stairs or a lift
Get a quote
We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Related advice
Aftercare tips
Once the work has cured, treat it gently:
- Avoid suction-cup mats
- Stick to gentle, non-abrasive cleaners
- Rinse off hair dye, oils and bath bombs immediately
- Repair dripping taps early
Treat the new finish gently at first: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.
When a repair is not the answer
We won’t take on work that will not last, so these are the limits:
- Acrylic that moves when you stand in it
- A metal bath with a through crack
- Steel that has corroded right through
Send us pictures and we’ll tell you honestly.
Surfaces we repair
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
For landlords and businesses
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which is easier on the people living there.
For anyone letting property in or around High Eggborough, we’ll quote for several properties at once. Just send pictures for each address and we will price them together.
About High Eggborough
High Eggborough is about 7 miles south of Selby, in East Riding of Yorkshire. Across the DN14 area, a technician comes to you. High Eggborough is one of 299 places in East Riding of Yorkshire we cover. You can also see our page for Leeds, about 19 miles away.
All of DN14 is covered. Nearby, we also work in Whitley (1 mile south-west), Great Heck (1 mile south-east), Balne (2 miles south-east), Womersley (3 miles south-west) and Fenwick (4 miles south). Further out, we also cover Goole (11 miles east), Howden (11 miles east), Snaith (4 miles east), Carlton (5 miles east), Rawcliffe (7 miles east) and Hook (12 miles east).
Landmarks near High Eggborough
Around High Eggborough, we work in homes near Railway Tavern, Hensall Community Primary School and Church of St Paul. High Eggborough’s nearest station is Hensall station, about 0.9 miles north-east of the centre.
Also near High Eggborough
Also in High Eggborough
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.
Different materials, different repairs
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
What we’re called out for in High Eggborough
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
The things customers generally mention when they call include:
- An outdated colour you’d like to change
- Lots of chips and rust spots
- An original cast iron bath that needs restoring
- Staining under the taps and around the waste
What to look for in a quote
- A fixed quote, and whether VAT is included
- How changes to the job are handled
- Whether cleaning and preparation are in the price
- Whether there are any call-out or travel charges
What affects the price in High Eggborough
Resurfacing from £350. We price every job individually, from your photos. What matters most is:
- The material and finish
- How easy the damage is to reach
- Whether it’s a chip, crack, burn or wear
- Unusual colours or finishes
A repair generally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
How to get a fixed quote
We price nearly every job from photos. This is what to send:
- One picture of the entire bath
- Any earlier repairs or coatings
- One sharp close-up of the damage
- Any details about the material
A quote takes minutes to ask for: photograph the damage, then the entire bath, add your postcode and send them to us. You’ll get a fixed quote, not an estimate.
About our accreditations · Every repair comes with a one-year guarantee.
