North Lincolnshire · England
Bath re-enamelling & resurfacing in High Risby, North Lincolnshire
Bath re-enamelling across High Risby and nearby, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- An outdated colour you’d like to change
- Stains that will not shift
Bath re-enamelling in High Risby, done in place
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. We work on cast iron baths, pressed steel baths and Victorian roll-tops, and people most frequently call us about a coloured bath you want in white and stains that won’t shift.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Location
- High Risby (DN15)
- Region
- North Lincolnshire
- Cover
- A year, on every repair
- Price
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Questions from High Risby
Do you cover High Risby?
Yes. We work across the UK and come to High Risby. Send us photos for a fixed quote, or call 0345 017 0787.
What information do you need?
Some photos, your postcode and how to reach you. On the day, access to the room.
Will it make a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Do I have to be there?
Someone needs to let us in and show us the job. You don’t need to watch us work.
What happens once I’ve sent photos?
We come back with a fixed price, plus dates. There is no obligation to book.
Will there be a smell?
There may be a mild smell during the work, which fades afterwards.
What does bath re-enamelling cost?
Prices start from £350. Every job gets a fixed quote based on pictures of the damage. Send a close-up and a picture of the entire item and your postcode.
What areas do you cover?
Everywhere in the UK, High Risby included. Travel is included in the price.
What happens on the day
We turn up at the time we agreed with you and checks the damage against your pictures first. The floor and nearby surfaces are covered before any work starts. The work itself takes the best part of a day, and we leave the room as we found it.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Have somewhere for us to park nearby if possible
- Let us know about parking or access
- Tell us if there are stairs or a lift
Get a quote
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed quote.
Related advice
Our work in High Risby
High Risby is about 4 miles north-east of Scunthorpe, in North Lincolnshire. We visit clients in High Risby and the surrounding area, so nothing has to leave your home. High Risby is one of 90 towns and villages in North Lincolnshire we cover. We work right across the region, from High Risby to Leeds (41 miles away).
Our visits in DN15 work the same way as everywhere else we cover. If you are just outside High Risby, we cover Dragonby (1 mile west), Roxby (1 mile north), Winterton (2 miles north), Normanby (3 miles north-west) and Thealby (3 miles north-west). Within a short drive, we also cover Scunthorpe (4 miles south-west), Barton-upon-Humber (8 miles north-east), Bottesford (5 miles south-west), Brigg (7 miles south-east), Frodingham (3 miles south-west) and Broughton (4 miles south-east).
Near you in High Risby
Our clients here include homes close to AALPS College and Engineering UTC Northern Lincolnshire and the streets around them. High Risby’s nearest station is Scunthorpe station, about 2.9 miles south-west. Other landmarks nearby include Scunthorpe General Hospital (3.3 miles south-west).
When to call us in High Risby
Frequently the bath has just had decades of use, with nothing wrong except the surface. The body of the bath is typically perfectly sound.
These are the problems we’re asked about most:
- An outdated colour you’d like to change
- A bath that stays dull however much you clean it
- Brown or grey marks that don’t clean off
- A roll-top that is seen better days
What to look for in a quote
- Whether they match the colour on site
- How soon you can use it again
- Whether a trained technician does the job
- How your room will be protected
Nearby places to High Risby
More services for High Risby
Why repair rather than replace?
If the bath is sound, re-enamelling is typically much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Resurfacing from £350, with every job priced individually. We do not add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why us?
- Fixed prices from your pictures
- Colour mixed on the day to match
- Everything repaired in place
- One price list for the entire UK
Take a look at our pricing and guide to resurfacing and replacement costs.
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
What your bath is made of matters
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
For landlords and businesses
Letting agents often send us pictures straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Landlords, letting agents and housing providers in High Risby use us as well as homeowners. Repairing between tenancies keeps void periods short, and it usually costs far less than a refit.
What affects the price in High Risby
Resurfacing from £350. A fixed quote means you know the cost before booking. We take into account:
- The colour and finish to match
- Whether old repairs or coatings need taking off
- How many items we do on one visit
- The size and number of damaged areas
The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed quote from your photos, so you know the cost before you book.
Quotes from your photos
A couple of clear pictures is all it takes. Try to include:
- Natural light rather than flash
- Something in shot to show the size
- One sharp close-up of the damage
- Where you are, by postcode
The quickest way to a price is to send two or three pictures through our quote form or call us. We will tell you honestly if a repair is the right fix.
Keeping it looking good
Most damage we see is avoidable. These habits help:
- Wash away dyes and oils after use
- Respect the curing time we give you
- Don’t leave a chip unrepaired
- Dry the bath after use to stop limescale
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
About our accreditations · Every repair comes with a one-year guarantee.
