North Lincolnshire · England
Bath Re-enamelling in Winterton
Fixed-price bath re-enamelling in Winterton and the surrounding area, usually in one visit and guaranteed for a year.
- Resurfacing from £350
- Stains that will not shift
- Several chips and rust patches
How we handle bath re-enamelling in Winterton
Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. Common call-outs are for an original cast iron bath that needs restoring and thin, worn enamel in places, across pressed steel baths, basins & shower trays and acrylic baths.
The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.
- Where
- Winterton (DN15)
- Area hub
- North Lincolnshire
- Cover
- A year, on every repair
- Price
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Signs you need bath re-enamelling in Winterton
Many baths we resurface have simply been well used. The body of the bath is usually perfectly sound.
Look out for these signs:
- A roll-top that’s seen better days
- Wear marks under the taps
- Staining under the taps and around the waste
- A dull, rough surface that won’t come clean
What to look for in a quote
- How to look after the finish
- The length of the guarantee and what it covers
- How long it needs to cure
- Whether they match the colour on site
Nearby places to Winterton
Also in Winterton
Repairs by material
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
What we can’t put right
We’d rather lose a job than do one that will not last, so these are the limits:
- A bath that’s rusted through
- A cast iron or steel bath that’s cracked right through
- A poorly supported acrylic bath, until it’s firmed up
Send us photos and we’ll tell you honestly before you book.
What we work on
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
The process
We begin by going over the job with you, so there are no surprises. Next, we cover and mask everything nearby and we start. Allow the best part of a day, and we’ll tell you if anything changes.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Keep pets and children out of the room while we work
- Point us to the nearest place to park
- Tell us about parking, stairs or access
Ask for a price
Email us pictures of the damage and a wider shot of the entire item, and tell us you are in Winterton, and we’ll come back with a fixed quote.
Read more
Can I fix it myself?
If you do try a kit, read the instructions carefully, and don’t use it until it has fully cured. If it fails, we can still put it right.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Questions from Winterton
How do I get a price for bath re-enamelling in Winterton?
Resurfacing from £350. Every job gets a fixed price based on pictures of the damage. Send a close-up of the damage and a wider photo with your DN15 postcode.
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
Is there a guarantee?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
Do you work for landlords and businesses?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
Can you re-enamel a roll-top bath?
Yes, frequently. We resurface the inside, and the outside can be refinished too.
Can you redo someone else’s repair?
Yes, regularly. Removing the old work can add time, and that is in the quote.
What happens next?
We check the damage, the material and your postcode, then reply with a quote.
Is it messy?
Dust sheets and masking go down before we start, and tidy up before we leave.
How to care for the repair
Looking after the surface is easy, and it makes a real difference:
- Use washing-up liquid and a soft cloth
- Dry the bath after use to stop limescale
- Wash away dyes and oils after use
- Do not leave a chip unrepaired
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Repair dripping taps promptly.
Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Our work in Winterton
Winterton is about 6 miles north of Scunthorpe, in North Lincolnshire. We work in every kind of home, old or new, large or small, plus businesses and rented homes. We work in 90 places across North Lincolnshire. You can also see our page for Leeds, about 40 miles away.
Postcode districts we cover here: DN15. Whether you live on High Street, D'Arcy Close and Low Street or anywhere nearby, we can come to you. With the A1077 and B1207 close by, Winterton is easy for our repair technicians to reach. Other places close to Winterton include Roxby (1 mile south), Thealby (2 miles west), West Halton (2 miles north-west), High Risby (2 miles south) and Normanby (3 miles west). Within a short drive, we also cover Scunthorpe (6 miles south), Barton-upon-Humber (7 miles east), Bottesford (8 miles south), Brigg (8 miles south-east), Frodingham (5 miles south-west) and Crosby (4 miles south-west).
Landmarks near Winterton
Around Winterton, we work in homes near Church of All Saints, Winterton Community Academy and Winterton Church of England Infants' School and the streets around them. Other local landmarks include Winterton Community Academy (within half a mile north-east) and Butchers Arms (under half a mile east). Nearby you will also find Scunthorpe General Hospital (5.4 miles south-west).
Landlords, agents and businesses in Winterton
Housing associations and facilities teams use us for planned and reactive repairs in North Lincolnshire and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Repair or replace in Winterton?
Getting a cast iron bath out is hard work: they’re heavy, frequently need breaking up, and a new one isn’t cheap. Resurfacing in place avoids that entirely. Prices start from £350. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.
Why book with us
- A year’s guarantee on all work
- No need to remove anything
- We will tell you if it’s not worth repairing
- Colours mixed by hand to suit your surface
Read our pricing and bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
