Kirklees · England
Bath Re-enamelling for Highburton homes
Bath re-enamelling for Highburton, without a refit. Get a fixed price from your photos, then book a visit.
- Resurfacing from £350
- Lots of chips and rust spots
- Brown or grey marks that don’t clean off
Prices and what affects them
Prices start from £350. There is no charge for travel to Highburton. The price depends on:
- How easy the damage is to reach
- How hard the colour is to match
- The material
- The size and number of damaged areas
We don’t add extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Quotes from your pictures
Most quotes are done from pictures alone. To make it quick:
- A coin beside the damage so we can judge size
- A photo taken from further back
- Details of any past repairs
- Where you are, by postcode
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can price the job.
Bath re-enamelling in Highburton, done in place
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. If you are dealing with enamel that’s lost its shine and feels rough and stains that won’t shift, we can typically put it right, whatever the material.
A one-year guarantee comes as standard, so you’re not left on your own once we’ve gone.
- Where
- Highburton (HD8)
- Area hub
- Kirklees
- Cover
- One year on every repair
- Quote
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Places near Highburton
More services for Highburton
What your bath is made of matters
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Work for landlords and builders
If you manage property in Highburton, we’ll quote for several properties at once. Just send photos for each address and we will price them together.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We’re CHAS, Constructionline and SafeContractor accredited.
What a repair can’t fix
Honesty matters more than a booking, so here’s what a repair won’t do:
- Problems we cannot see until an old finish comes off
- A metal bath with a through crack
- Leaks from fittings rather than the bath
If in doubt, send photos and we will say what we think before booking.
Materials we work on in Highburton
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
Where we work around Highburton
Highburton is about 4 miles east of Lockwood, in Kirklees. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Highburton is one of 189 places in Kirklees where we work. Our nearest city page is Leeds, about 15 miles away.
All of HD8 is covered. Whether you live on Moor Lane, Hall Lane and North Road or a nearby road, a technician can come to you. Neighbouring places we cover include Kirkburton (1 mile south-east), Storthes Hall (1 mile south-west), Lepton (1 mile north), Moor Side (1 mile south-west) and Fenay Bridge (1 mile north). We also work in nearby towns such as Huddersfield (4 miles north-west), Dewsbury (6 miles north-east), Batley (7 miles north), Mirfield (4 miles north), Liversedge (6 miles north) and Cleckheaton (7 miles north).
Local landmarks in Highburton
Locally, our jobs take us to homes close to King James's School, Church of All Hallows and Kirkburton Church of England Voluntary Aided First School. The nearest railway station is Stocksmoor station, about 1.7 miles south. Other landmarks nearby include Storthes Hall Hospital (0.8 miles south-west) and Cumberworth Half (2.8 miles south-east). Not far away are Castle Hill.
What happens on the day
Your technician turns up at the time we agreed with you, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. The work itself takes most of the day, and we leave the room as we found it.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s typically ready the day after.
How to prepare
- Let us know about parking or access
- Tell us if there are stairs or a lift
- Mention any earlier repairs or resurfacing
How to get a price
There is no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
Read more
Looking after it afterwards
So the finish stays in good condition for years:
- Wash away dyes and oils after use
- Do not leave bottles, razors or sponges standing on the surface
- Use washing-up liquid and a soft cloth
- Do not use the bath until it has fully cured
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
On a worn bath, rust spots keep spreading and make the job bigger. It’s simpler to resurface before they spread.
FAQs for Highburton
Do you cover the entire of Kirklees?
We work UK-wide, so Highburton is covered. Prices do not change with location.
Can you quote from photos?
Nearly always. We only ask to see it in person if the pictures can’t show what we need.
How long will the bath be out of use?
One day for most baths and can be used the day after. We will confirm timings when we quote.
What does bath re-enamelling cost?
Prices start from £350. The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before you book.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
Do you cover Highburton?
Yes, we do. We send a technician to Highburton for every job, and the price is the same as everywhere else.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Do you need bath re-enamelling in Highburton?
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. We strip what’s failing and start again.
It’s worth getting a quote if you see:
- Thin, worn enamel in places
- A bath in a colour that no longer suits
- Stains that won’t shift
- Several chips and rust patches
Questions to ask before booking
- How long it needs to cure
- A fixed price, and whether VAT is included
- What preparation is included
- What the guarantee covers, and for how long
Should you replace it?
A new bath means a plumber, removing a heavy bath, making good the walls and tiles and days without a bathroom. Re-enamelling renews the whole surface without moving it. Resurfacing from £350, with every job priced individually. What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed price from your pictures, so there are no surprises on the day.
Why book with us
- Accredited with CHAS, Constructionline and SafeContractor
- We leave the room as we found it
- Most jobs done in one visit
- Colour-matched on site
Read our pricing and resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
