Torbay · England
Bath re-enamelling & resurfacing in Hillhead, Torbay
Bath re-enamelling for Hillhead, without a refit. Send us pictures for a fixed quote, then we come to you.
- Resurfacing from £350
- Wear marks under the taps
- Lots of chips and rust spots
How to look after the repair
Nothing complicated is needed, just a few sensible habits:
- Rinse off hair dye, oils and bath bombs immediately
- Get any chip repaired quickly
- Never use suction bath mats
- Do not leave bottles, razors or sponges standing on the surface
The first few days matter most: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Don’t try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
Bath re-enamelling at your home in Hillhead
After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, and we take our time over it. Whether it’s chips and rust in more than one place and an old resurfacing that’s failing, we can help, whatever the material.
The work is covered for a year after we finish. If anything is not right, ring us and we’ll come back.
- Where
- Hillhead (TQ5)
- Area hub
- Torbay
- Warranty
- A year, on every repair
- Quote
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
How it works
Arrival times are agreed in advance, so you are not left guessing. Once we are there, the work takes most of the day. We leave the room clean and you will know when it can be used.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Move bottles, mats and clutter away from the area
- Ensure the room can be ventilated
- Let us know if it has been repaired before
Getting a price
To get a price, send a couple of pictures using our quote form or call us. We will tell you honestly if a repair is the right fix.
Advice
Other services in Hillhead
Repairs by material
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
What we’re called out for in Hillhead
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. That is the point where re-enamelling makes sense.
The things clients usually mention when they call include:
- Wear marks under the taps
- Lots of chips and rust spots
- A period or roll-top bath worth keeping
- An old resurfacing that is failing
What to look for in a quote
- If travel is included in the price
- Who turns up on the day
- Whether cleaning and preparation are in the price
- Whether the price is fixed and includes VAT
Common questions in Hillhead
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as householders in Hillhead.
How long is the bath unusable?
Most baths are done in a day, ready the following day. We will confirm timings when we quote.
Is a repair better than a new one?
Typically, if the item is otherwise sound. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.
Will it make a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Is it safe with children and pets around?
We ask you to keep children and pets out of the room while we work and until it has cured. The rest of the house is unaffected.
Can you make a coloured bath white?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
Can I get a quote without a visit?
Nearly always. If photos do not show enough, we’ll ask for another angle.
What areas do you cover?
We work UK-wide, so Hillhead is covered. Our prices are the same everywhere.
Hillhead and nearby
Hillhead is about 2 miles south-west of Brixham, in Torbay. Wherever you are in the TQ5 postcode area, a technician comes to you. Our repair technicians cover all 23 towns and villages in Torbay.
Postcode districts we cover here: TQ5. From Raddicombe Drive, Hillhead Park and Kingswear Road or anywhere nearby, a technician can come to you. Neighbouring places we cover include Brixham (2 miles north-east), Galmpton (2 miles north-west), Kingswear (2 miles south-west), Dartmouth (3 miles south-west) and Warfleet (3 miles south-west). We also work in nearby towns such as Paignton (5 miles north), Torquay (7 miles north), Ellacombe (7 miles north), Babbacombe (7 miles north), Torre (7 miles north) and St Marychurch (7 miles north).
Local landmarks in Hillhead
Locally, our jobs take us to homes close to Churston Ferrers Grammar School Academy and St Margaret Clitherow Catholic Primary School and the streets around them. Hillhead’s nearest station is Paignton station, roughly 4.3 miles north of the centre. Other landmarks nearby include Kingswear Castle (2.4 miles south) and Brixham Battery Museum (2 miles north-east).
Work for landlords and builders
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Can I fix it myself?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
What we can’t put right
A few problems are outside what a surface repair can do:
- A bath that is rusted through
- Problems we cannot see until an old finish comes off
- A poorly supported acrylic bath, until it’s firmed up
If in doubt, send photos and we will say what we think.
What we work on
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
- Acrylic baths
Should you replace it?
Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Prices start from £350. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
Why choose Surface Doctor in Hillhead
- Colours mixed by hand to suit your surface
- We come to you, anywhere in the UK
- A fixed quote before you book
- CHAS and Constructionline accredited
Read our pricing and bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
