Torbay · England

Bath re-enamelling & resurfacing in Galmpton, Torbay

Bath re-enamelling in and around Galmpton: a fixed quote from photos, a tidy visit and a one-year guarantee.

  • Resurfacing from £350
  • An outdated colour you’d like to change
  • An old resurfacing that’s failing
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling in Galmpton

DIY kit or professional repair?

It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

About our bath re-enamelling in Galmpton

Most baths are re-enamelled in a day, with the bath ready to use the following day. Nothing is disconnected or removed. Common call-outs are for a period or roll-top bath worth keeping and lots of chips and rust spots, in pressed steel baths, Victorian roll-tops and cast iron baths.

We stand behind the work with a one-year guarantee.

Area
Galmpton (TQ5, TQ4)
County
Torbay
Cover
12 months on all our work
Quote
From £350. Free, fixed price from pictures
Call
0345 017 0787
Page updated
23 October 2026
Surface Doctor technician refinishing the outside of a roll-top bath

Honest limits

We won’t take on work that will not last, so these are the limits:

  • A cast iron or steel bath that is cracked right through
  • Steel that has corroded right through
  • Problems we cannot see until an old finish comes off

Send us pictures and we’ll tell you honestly before you book.

What we work on

  • Cast iron baths
  • Acrylic baths
  • Victorian roll-tops
  • Pressed steel baths
  • Basins & shower trays

Should you replace it?

A replacement frequently means several trades over several days. Resurfacing takes one technician and typically a day. Resurfacing from £350, with every job priced individually. Instead of hourly rates, we price the entire job up front. It depends on the damage, the material and access, and doing several items at once reduces it.

Why book with us

  • No need to remove anything
  • Dust sheets down, tidy finish
  • Fixed prices from your pictures
  • Work done at your home or business

Take a look at our full price list or bath cost comparison.

Galmpton and nearby

Galmpton is about 2 miles west of Brixham, in Torbay. Our technicians come to homes and businesses in Galmpton and the surrounding area, so you do not need to take anything anywhere. Galmpton is one of 23 places in Torbay we cover.

We cover every part of TQ5 and TQ4. Whether you live on Slade Lane, Langdon Lane and Greenway Road or a nearby road, a technician can come to you. Nearby, we also work in Hillhead (2 miles south-east), Brixham (2 miles east), Dartmouth (3 miles south), Kingswear (3 miles south) and Townstal (3 miles south-west). Within a short drive, we also cover Paignton (3 miles north), Torquay (6 miles north), Ellacombe (6 miles north), Babbacombe (6 miles north), Torre (5 miles north) and St Marychurch (6 miles north).

What’s near Galmpton

In Galmpton, that means homes near Manor Inn, Churston Ferrers Grammar School Academy and Chapel of the Good Shepherd and the streets around them. For rail, the closest station is Paignton station, roughly 2.7 miles north. A little further out are Bayard's Cove Fort (3.3 miles south) and Brixham Battery Museum (1.9 miles east). Open spaces near Galmpton include Occombe Valley Woods.

Map of Galmpton © OpenStreetMap contributors

Landlord and trade work in Galmpton

If you manage property in Galmpton, we will quote for several properties at once. Just send pictures for each address and we will come back with a combined price.

Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

Prices and what affects them

Prices start from £350. You’ll know the full cost before booking. We look at:

  • Whether it’s a chip, crack, burn or wear
  • Access to the area
  • How many areas need work
  • How hard the colour is to match

We charge the same wherever you are, so there is no premium for Galmpton. The job itself decides the price: the material, the amount of damage and how many items.

Send photos for a quote

Two or three clear pictures are normally enough. It helps if you send:

  • One picture of the whole bath
  • A close-up of the damage, in focus
  • Daylight if possible, and no flash reflection
  • The postcode, so we can plan the visit

Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them over. You will get a fixed quote, not an estimate.

Keeping it looking good

So the finish stays in good condition:

  • Respect the curing time we give you
  • A quick wipe after use keeps limescale away
  • Fix dripping taps quickly
  • Have chips seen to early

Treat the new finish gently at first: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.

Leave a peeling coating alone. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.

How it works

The work is clean and fairly quiet, so you can stay at home while we’re there. Protection goes down first, then the work takes the best part of a day. At the end we talk you through the curing time and the aftercare.

  1. We check the bath and agree the finish with you.
  2. Everything around the bath is masked and covered.
  3. We degrease the bath, fix any damage and key the surface.
  4. We apply the primer and then the finish coats.
  5. The masking comes off, we tidy up and tell you when it can be used.

Getting ready for the visit

  • Mention any earlier repairs or resurfacing
  • Let us know about parking or access
  • Open a window if you can

How to get a price

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job without visiting.

Get a free quote

Read more

Different materials, different repairs

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.

Acrylic

Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.

FAQs for Galmpton

Is my repair covered?

Every repair comes with a one-year guarantee. We will explain what it covers when we quote.

What do you need from me?

A close-up, a wider photo and your postcode. After that, we just agree a date.

Will the new finish last?

That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.

Can you do more than one item on the same visit?

Yes, and it’s often cheaper. Just add the extra items to your photos and we will quote them together.

Do you cover the whole of Torbay?

The entire UK, including all of Torbay. Send your postcode with your pictures and we will confirm dates.

I’m a tenant. Can you help?

Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged.

Does someone need to be in?

We need someone to let us in. After that, you can carry on with your day.

Are you a vetted contractor?

Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.