Staffordshire · England
Bath Re-enamelling in Hillsdale
Full bath re-enamelling and resurfacing at your home in Hillsdale, with a one-year guarantee on every repair.
- Resurfacing from £350
- Lots of chips and rust spots
- Stains that will not shift
When a repair isn’t the answer
Honesty matters more than a booking, so here’s what a repair cannot fix:
- Holes rusted through the metal
- An acrylic bath that flexes badly underfoot
- A cast iron or steel bath that’s cracked right through
If in doubt, send pictures and we’ll say what we think before you book.
Surfaces we repair
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
Bath re-enamelling in Hillsdale without replacing anything
Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. We work on acrylic baths, cast iron baths and pressed steel baths, and people most often call us about enamel that’s lost its shine and feels rough and thin, worn enamel in places.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Location
- Hillsdale (ST13)
- Region
- Staffordshire
- Warranty
- A year, on every repair
- Quote
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
For landlords and businesses
We carry out planned and one-off repairs for housing associations and facilities teams in Staffordshire and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
What we do, step by step
On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job normally takes a full day. We tidy up before we leave and tell you when it’s ready to use.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s generally ready the day after.
Preparing for the visit
- Have somewhere for us to park nearby if possible
- Tell us about any previous repairs or coatings
- Mention if the room is upstairs or in a flat
Ask for a price
If you’re in Hillsdale and want a price, pictures are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Related advice
How we price bath re-enamelling
Prices start from £350. We price every job individually, from your photos. What matters most is:
- How many items we do on one visit
- Where the damage is and how we get to it
- Unusual colours or finishes
- How many areas need work
The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed price from your pictures, so you know the cost before booking.
Send photos for a quote
When you take your photos, these tips help us give you a firm price:
- One sharp close-up of the damage
- Whether it’s been repaired or coated before
- A photo taken from further back
- Daylight if possible, and no flash reflection
There is no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Looking after it afterwards
Looking after the surface is easy, and it makes a real difference:
- Repair dripping taps early
- Respect the curing time we give you
- Don’t leave bottles, razors or sponges standing on the surface
- Wipe the bath dry after use in hard water areas
Rinse the bath and wipe it over after use, especially in hard water areas, so limescale can’t build up.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
Why repair rather than replace?
If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Our bath re-enamelling starts from £350. We don’t add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
What you get with us
- CHAS, Constructionline and SafeContractor accredited
- Technicians who travel to you, UK-wide
- A year’s guarantee on all work
- A fixed quote before you book
Read our full price list and guide to resurfacing and replacement costs.
Common problems we fix in Hillsdale
Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
If you can see any of these, send us a photo:
- A bath in a colour that no longer suits
- Lots of chips and rust spots
- A coating lifting around the plughole
- A dull, rough surface that won’t come clean
Before booking anyone
- How the colour is matched
- Aftercare advice
- What prep work is covered
- Whether the price covers travel
Common questions in Hillsdale
Do you work in Hillsdale?
Yes. We work across the UK and travel to Hillsdale. Send pictures and we will quote, or call 0345 017 0787.
Can you fix a peeling bath coating?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders.
Does someone need to be in?
Yes. We need access to the room while we work, at a time that suits you.
When can you do it?
That depends on our diary for your area. Send pictures with your postcode and we’ll reply with the earliest dates.
Will it make a mess?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Can you resurface a pink bath in white?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
Do you resurface freestanding baths?
Yes. We can do the inside and outside.
Hillsdale and nearby
Hillsdale is about 6 miles east of Leek, in Staffordshire. Whether you are in the middle of Hillsdale or on the outskirts, the service is the same: a fixed price, a tidy visit and a guarantee. Hillsdale is one of 512 places in Staffordshire we cover. Our nearest city page is Manchester, about 30 miles away.
Our technicians cover all of ST13. Close by, we cover Waterfall (2 miles south), Waterhouses (3 miles south), Back o'th' Brook (3 miles south), Stanshope (3 miles east) and Alstonefield (3 miles east). Within a short drive, we also cover Newcastle-under-Lyme (15 miles west), Longton (13 miles south-west), Leek (6 miles west), Biddulph (12 miles west), Kidsgrove (15 miles west) and Cheadle (9 miles south-west).
Around Hillsdale
Around Hillsdale, we work in homes near Cavalier Inn and Church of All Saints. Other landmarks nearby include Alstonefield Geohut (3.3 miles east). Open spaces near Hillsdale include Castern Wood and Wetton Hill.
Places near Hillsdale
Also in Hillsdale
What your bath is made of matters
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s what we repair.
About our accreditations · Every repair comes with a one-year guarantee.
