Staffordshire · England
Bath re-enamelling & resurfacing in Hollington, Staffordshire
Our repair technicians come to Hollington for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- Wear marks under the taps
- A roll-top that is seen better days
Bath re-enamelling at your home in Hollington
A re-enamelled bath looks and feels like a new one, without any of the disruption of replacing it. It suits anyone happy with the bathroom apart from the bath. If you are dealing with stains that won’t shift and a coloured bath you want in white, we can typically put it right.
You’re covered for a year from the day of the repair. If anything is not right, ring us and we’ll come back.
- Where
- Hollington (ST10)
- Region
- Staffordshire
- Guarantee
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What we are called out for in Hollington
The gloss on enamel is thin, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
People generally call us after spotting one of these:
- A coloured bath you want in white
- Chips and rust in more than one place
- A coating lifting around the plughole
- An original cast iron bath that needs restoring
What your quote should include
- What protection goes down before work starts
- How soon you can use it again
- Who turns up on the day
- Whether they match the colour on site
Keeping it looking good
After the repair has cured, a few habits help it last:
- Rinse off hair dye, oils and bath bombs immediately
- Dry the bath after use to stop limescale
- Repair dripping taps early
- Keep suction mats out of the bath
Use mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. It’s simpler to resurface before they spread.
Repairing versus replacing in Hollington
A new bath means a plumber, lifting out the old bath, re-tiling or making good the walls and days without a bathroom. Resurfacing gives the bath a new finish with the bath left where it is. Our bath re-enamelling starts from £350. Set against the cost of replacement, a repair is usually a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why book with us
- Usually one visit, start to finish
- Colours mixed by hand to suit your surface
- Honest advice, even when it means no job
- Fixed prices from your photos
Read our pricing or resurfacing vs replacement cost guide.
DIY repairs versus a professional job
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Prices and what affects them
Resurfacing from £350. Each job gets its own fixed price. This is what makes a difference:
- How many items we do on one visit
- Any earlier repairs that need removing first
- Access to the area
- Whether it’s a chip, crack, burn or wear
What it costs depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. You get a fixed price from your pictures, so you know the cost before you book.
Quotes from your photos
Good pictures mean an accurate price. Here’s what helps:
- A coin beside the damage so we can judge size
- Any details about the material
- Daylight if possible, and no flash reflection
- The postcode, so we can plan the visit
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can price the job.
How the visit works
We work cleanly and quietly, so you can stay at home while we’re there. Protection goes down first, then the job itself takes most of the day. At the end we talk you through the curing time and the aftercare.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can typically be used the day after.
How to prepare
- Open a window if you can
- Plan for the room to be out of bounds to pets and children
- Move bottles, mats and clutter away from the area
How to get a price
Most clients in Hollington get their price from photos. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Related advice
When we would advise against a repair
We won’t take on work that won’t last, so these are the limits:
- A cast iron or steel bath that’s cracked right through
- An acrylic bath that flexes badly underfoot
- Problems we can’t see until an old finish comes off
If in doubt, send photos and we will say what we think before booking.
Materials we repair
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Cast iron baths
Hollington and nearby
Hollington is about 4 miles south-east of Cheadle, in Staffordshire. Across the ST10 area, we come to you. Hollington is one of 512 places in Staffordshire we cover. Our nearest city page is Birmingham, about 33 miles away.
Jobs in ST10 are booked in the same way as anywhere else. Streets in the area include Quarry Bank and Quarry Road. We also travel to Great Gate (1 mile north), Fole (1 mile south-west), Checkley (2 miles south-west), Beamhurst (2 miles south) and Lower Tean (2 miles west). We also work in nearby towns such as Stafford (13 miles south-west), Newcastle-under-Lyme (14 miles west), Longton (9 miles west), Rugeley (13 miles south), Stone (10 miles west) and Leek (11 miles north-west).
Around Hollington
We visit homes around Church of St John and The Raddle Inn, among other places. For rail, the closest station is Uttoxeter station, about 4.6 miles south-east. Further afield, we also cover the area around Cheadle Hospital (3.7 miles north-west) and Alton Castle (2.2 miles north-east). For a walk, there’s Cotton Dell.
Common questions in Hollington
How long is the bath unusable?
One day for most baths and can be used the day after. We will confirm timings when we quote.
Do you charge for travel?
Travel is included in the price, and we charge the same wherever you are.
Do you resurface freestanding baths?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Can landlords book you?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
What areas do you cover?
The whole UK, including all of Staffordshire. Just include your postcode and we’ll confirm dates.
Do the materials smell?
A little, depending on the job. Open windows and an extractor fan help.
What does bath re-enamelling cost?
Prices start from £350. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
What happens if you find more damage?
If we find something the pictures didn’t show, we explain it first. The price only changes if you agree.
Towns and villages near Hollington
What else we do in Hollington
For landlords and businesses
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
About our accreditations · Every repair comes with a one-year guarantee.
