Torfaen · Wales
Bath re-enamelling & resurfacing in Hollybush, Torfaen
Full bath re-enamelling and resurfacing at your home in Hollybush, with a one-year guarantee on every repair.
- Resurfacing from £350
- Chips and rust in more than one place
- An original cast iron bath that needs restoring
Bath re-enamelling in Hollybush, done in place
After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, so we don’t cut corners on it. If you’re dealing with lots of chips and rust spots and staining under the taps and around the waste, we can help.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Area
- Hollybush (NP44)
- Region
- Torfaen
- Cover
- A year, on every repair
- Price
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Covering Hollybush
Hollybush is about 1 mile south-west of Cwmbrân, in Torfaen. Clients in Hollybush get the same service as everywhere else we cover: a fixed quote from photos, and a technician at your door on the day. We cover all 67 towns and villages across Torfaen, from the larger towns to small villages. Our nearest city page is Birmingham, about 76 miles away.
Postcode districts we cover here: NP44. Jobs here include addresses on Tydies, Oxtens and Stiels and the roads around them. Nearby, we also work in Coed Eva (1 mile north), Ty Coch (1 mile north-east), Two Locks (1 mile north-east), Tŷ-canol (1 mile north-west) and Fairwater (1 mile north). We also work in nearby towns such as Pontypool (5 miles north), Abersychan (7 miles north), Pant-teg (4 miles north), Blaenavon (10 miles north), Pont-rhyd-yr-ynn (3 miles north) and Wainfelin (5 miles north).
Around Hollybush
Locally, our jobs take us to homes close to Boating Lake Park, Fairwater High School and Rougemont School and the streets around them. Also close by are Coed Eva Primary (0.7 miles north) and Blinkin Owl pub (0.5 miles north). The nearest railway station is Cwmbran station, about 2.1 miles north-east. A little further out are Risca Industrial History Museum (2.9 miles south-west) and Cwmbran Shopping Centre (1.8 miles north-east). Not far away are Cwm Lickey Lake and Twmbarlwm.
Hollybush questions
Can you repair something that’s been repaired before?
Most of the time. Let us know what was used before and we’ll plan for it.
How long does re-enamelling last?
Look after it and it lasts. Avoid abrasive cleaners and suction mats.
Is there any odour?
Some materials have a smell while they’re applied. It clears as the materials cure.
How do I get a price for bath re-enamelling in Hollybush?
Prices start from £350. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
How do I book?
Use the quote form or ring 0345 017 0787.
Are there extra charges for Hollybush?
There’s no separate call-out charge. The fixed quote covers the visit and the work.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
What happens after I send pictures?
We review the photos and send a fixed quote with dates.
What bath re-enamelling costs
Resurfacing from £350. We give every job a fixed quote from photos. This is what makes a difference:
- How much damage there is
- The type of damage
- How easy the damage is to reach
- What the surface is made of
A repair normally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Getting a price from photos
Almost every job we do is priced from pictures. This is what we need:
- Your postcode, so we can check dates
- A close-up of the damage, in focus
- Details of any past repairs
- Any details about the material
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath, we can price the job.
Different materials, different repairs
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s what we repair.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it does not work out, we can still repair it properly.
The process
On the day itself, there’s little for you to do. Show us the job, point us to the room, and we will get on with it. Most visits take the best part of a day, including clearing up.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Tell us if there are stairs or a lift
- Have a window or extractor fan available
- Let us know about parking or access
Ask for a price
For a price in Hollybush, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Read more
Should you replace it?
A replacement often means several trades over several days. Re-enamelling is one technician, usually one day, and the bath is usable the day after. Prices start from £350. Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
Why book with us
- Usually one visit, start to finish
- Work done at your home or business
- Dust sheets down, tidy finish
- Free fixed quotes from pictures
Read our pricing and bath cost comparison.
What we can’t put right
A repair isn’t always the answer, and we’d rather say so up front. Repairs won’t solve:
- A bath split right through the body
- Holes rusted through the metal
- An acrylic bath that flexes badly underfoot
Not sure? Send photos and we will give you a straight answer before booking.
Materials we repair
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
Aftercare tips
Once the work has cured, treat it gently:
- Rinse off hair dye, oils and bath bombs straight away
- A quick wipe after use keeps limescale away
- Keep suction mats out of the bath
- Do not leave bottles, razors or sponges standing on the surface
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.
Also in Hollybush
For landlords and businesses
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
About our accreditations · Every repair comes with a one-year guarantee.
