Central Bedfordshire · England
Bath re-enamelling & resurfacing in Holme, Central Bedfordshire
We travel to Holme for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Stains that will not shift
Bath re-enamelling at your home in Holme
Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. We work on basins & shower trays, pressed steel baths and acrylic baths, and common reasons people get in touch are several chips and rust patches and stains that won’t shift.
You’re covered for a year from the day of the repair. Just call us if there is a problem and we will sort it.
- Area
- Holme (SG18)
- Area hub
- Central Bedfordshire
- Guarantee
- One year on every repair
- Price
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Honest limits
To be straight with you, some problems need a different fix:
- Acrylic that moves when you stand in it
- Damage hidden under a previous coating, until it’s stripped back
- Leaking taps or wastes (a plumber’s job)
If in doubt, send pictures and we’ll say what we think before booking.
Materials we work on in Holme
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
Should you replace it?
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing usually wins. Prices start from £350. We don’t add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why choose Surface Doctor in Holme
- We come to you, anywhere in the UK
- Most jobs done in one visit
- Colour mixed on the day to match
- Dust sheets down, tidy finish
Take a look at our pricing or bath cost comparison.
Prices and what affects them
Prices start from £350. There’s no area surcharge for Holme. What changes the price is:
- What the surface is made of
- Whether it’s a chip, crack, burn or wear
- Any earlier repairs that need removing first
- How many items we do on one visit
A repair is priced on what needs doing, not where you live. The full price is agreed before you book, with no extras added later.
Getting a price from pictures
The better the pictures, the more accurate the price. Here’s what we find most useful:
- A wider photo showing the whole bath
- The material, if you know it
- A clear, close picture of the problem area
- The postcode, so we can plan the visit
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them over. You will get a fixed price, not an estimate.
Holme and nearby
Holme is about 2 miles south-west of Biggleswade, in Central Bedfordshire. Across the SG18 area, a technician comes to you. Holme is one of 121 places in Central Bedfordshire we cover. Our jobs stretch from Holme to London (about 40 miles away).
All of SG18 is within our area, from the main roads to the quietest streets. From Langford Road, Southill Road and Sheep Walk or anywhere nearby, a technician can come to you. Other places close to Holme include Broom (1 mile west), Langford (1 mile south), Biggleswade (2 miles north-east), Upper Caldecote (2 miles north-west) and Henlow (3 miles south). Further out, we also cover Houghton Regis (15 miles south-west), Flitwick (11 miles south-west), Sandy (5 miles north), Shefford (4 miles south-west), Ampthill (10 miles west) and Lower Stondon (5 miles south).
Near you in Holme
Our customers here include homes close to Langford Village Academy, Ivel Valley School and Church of St Andrew, among other places. The nearest railway station is Biggleswade station, about 1.1 miles north. A little further out are Biggleswade Hospital (2.2 miles north-east) and Jordans Mill (within half a mile north-west). Green spaces nearby include Warren Villas.
Looking after it afterwards
It’s all simple stuff, just a few sensible habits:
- Don’t let dyes or oils sit on the finish
- Keep toiletries on a shelf rather than in the bath
- Get any chip repaired quickly
- Leave the bath for the full curing time before using it
Use mild, non-abrasive cleaners, don’t use suction bath mats, and do not leave bottles or razors standing on the surface.
Don’t try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
Common questions in Holme
Will the new finish last?
Look after it and it lasts. Avoid abrasive cleaners and suction mats.
It’s been repaired before. Can you still fix it?
Yes, we frequently do. Removing the old work can add time, and that is in the quote.
Do you resurface freestanding baths?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Will it make a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
I rent my home. Can I book you?
We are happy to deal with the tenant, landlord or agent. Just make sure the landlord agrees.
Is there a smell?
A little, during the work. We set up ventilation and the smell fades as it cures.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
Can you price it without visiting?
Nearly always. We only ask to see it in person if the photos can’t show what we need.
Do you need bath re-enamelling in Holme?
Previous coatings can fail too, lifting by the plughole or blistering. We strip what’s failing and start again.
Customers normally contact us about:
- Lots of chips and rust spots
- An old resurfacing that’s failing
- Staining under the taps and around the waste
- A bath that stays dull however much you clean it
Questions to ask before you book
- Whether the price covers travel
- What happens if they find more damage
- What aftercare is recommended
- Is the price fixed, and does it include VAT?
Materials and what they mean for the repair
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
How it works
We begin by going over the job with you. Then the area is sheeted and masked and we start. It normally takes a full day, and we’ll keep you posted as we go.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the day after.
Preparing for the visit
- Open a window if you can
- Let us know about parking or access
- Move bottles, mats and clutter away from the area
How to get a price
Upload a photo of the damage and one of the entire item, with your SG18 postcode, and we’ll come back with a fixed quote.
Related advice
Places near Holme
More services for Holme
DIY repairs versus a professional job
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
About our accreditations · Every repair comes with a one-year guarantee.
