Wiltshire · England
Bath re-enamelling & resurfacing in Holt, Wiltshire
Bath re-enamelling for Holt, without a refit. Get a fixed price from your pictures, then we come to you.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- Lots of chips and rust spots
DIY repairs versus a professional job
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
Bath re-enamelling at your home in Holt
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. There is no removal, plumbing or tiling involved. We work on acrylic baths, pressed steel baths and cast iron baths, and the jobs we see most are wear marks under the taps and a coloured bath you want in white.
You’re covered after we leave: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Where
- Holt (BA14)
- County
- Wiltshire
- Warranty
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Holt: your questions answered
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
How much does bath re-enamelling cost in Holt?
Resurfacing from £350. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
How durable is a resurfaced bath?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
Can you make a coloured bath white?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
Do you resurface freestanding baths?
Yes. We can do the inside and outside if you’d like.
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Wiltshire.
Can you redo someone else’s repair?
Generally, yes. The old repair comes out first.
Does the bath have to be removed?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
Keeping it looking good
Nothing complicated is needed:
- Do not let dyes or oils sit on the finish
- Dry the bath after use to stop limescale
- Repair dripping taps early
- Respect the curing time we give you
A quick rinse and wipe after use helps, especially in hard water areas, to stop limescale building up.
If a previous coating is starting to peel, do not pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Covering Holt
Holt is about 3 miles north of Trowbridge, in Wiltshire. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We work in 425 places in Wiltshire, from the larger towns to small villages. Our jobs stretch from Holt to Birmingham (78 miles away).
We work across the BA14 postcode area. Jobs here include addresses on Station Road, The Street and The Gravel and the roads around them. With the B3107 close by, Holt is simple for us to get to. Other places close to Holt include Broughton Gifford (1 mile north-east), Hilperton (2 miles south), Norrington Common (2 miles north-east), Semington (2 miles south-east) and Berryfield (2 miles east). We also work in nearby towns such as Trowbridge (3 miles south), Chippenham (8 miles north-east), Calne (10 miles north-east), Devizes (9 miles east), Westbury (7 miles south) and Melksham (3 miles east).
Near you in Holt
Locally, our jobs take us to homes close to Church Hall Adjoining Holt United Reform Church and Holt Voluntary Controlled Primary School. Holt’s nearest station is Bradford-On-Avon station, about 2.6 miles west. Well-known places in the area include Bradford On Avon Museum (2.5 miles west) and Trowbridge Castle (2.6 miles south).
- Local facilities include Bradford Without (1.2 miles south-west)
Repair or replace in Holt?
Replacing a cast iron bath is a big job: they’re heavy, often need breaking up, and a new one isn’t cheap. Resurfacing in place avoids that entirely. Prices start from £350. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
What you get with us
- One-year guarantee on every repair
- No extra charge for your area
- Colours mixed by hand to suit your surface
- A fixed quote before booking
See our prices page and bath cost comparison.
Common problems we fix in Holt
A dull surface stains and holds dirt, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
Send us a picture if you notice any of these:
- An original cast iron bath that needs restoring
- A peeling or bubbling previous coating
- Chips and rust in more than one place
- Staining under the taps and around the waste
Questions to ask before you book
- How the colour is matched
- How soon you can use it again
- What prep work is covered
- Who turns up on the day
Towns and villages near Holt
More services for Holt
For landlords and businesses
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so we keep visits short and tidy. We will fit around changeovers where we can.
What we do, step by step
Here’s how a visit typically runs: we arrive on time, protect everything around the work area, carry out the work and clear up. Plan for a full day. Before we go, we will explain when it can be used and what to avoid for the first few days.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s generally ready the day after.
How to prepare
- Keep a parking space free if you can
- Mention any parking restrictions or tricky access
- Let us know which floor the room is on
How to get a price
We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.
Related advice
How we price bath re-enamelling
Resurfacing from £350. There is no charge for travel to Holt. The price depends on:
- Where the damage is and how we get to it
- The size and number of damaged areas
- What the surface is made of
- The colour and finish to match
The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed quote from your pictures, so you know the cost before you book.
How to get a fixed quote
Two or three clear pictures are generally enough. Try to include:
- A coin beside the damage so we can judge size
- A close-up of the damage, in focus
- Good light, ideally daylight, without flash glare
- The material, if you know it
Upload photos of the damage and a wider shot of the entire item, with your BA14 postcode, and we’ll reply with a fixed quote.
What a repair can’t fix
It helps to know what we can’t do too:
- An acrylic bath that flexes badly underfoot
- A cast iron or steel bath that’s cracked right through
- Anything hidden under an old coating, until we remove it
If in doubt, send photos and we’ll say what we think.
Materials we work on in Holt
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
About our accreditations · Every repair comes with a one-year guarantee.
